Difference between revisions of "Template:Rotete"
(Created page with "== <font color="blue">如何旋转显示方向</font> == <font color="red">此方法只针对树莓派系列的显示屏,其它显示屏并不适用</font> *'''方法一'''...") |
(→如何旋转显示方向) |
||
Line 1: | Line 1: | ||
− | == <font color="blue"> | + | == <font color="blue">How to rotate the display direction</font> == |
− | <font color="red"> | + | <font color="red">This method only applies to the raspberry PI series of display screens, other display screens do not apply.</font> |
− | *''' | + | *'''Method 1''',If the driver is not installed, execute the following command: |
{{code| | {{code| | ||
sudo rm -rf LCD-show | sudo rm -rf LCD-show | ||
Line 9: | Line 9: | ||
sudo ./LCD7C-show 90 | sudo ./LCD7C-show 90 | ||
}} | }} | ||
− | + | After execution, the driver will be installed. The system will automatically restart, and the display screen will rotate 90 degrees to display normally. <br/> | |
− | + | (This is the '''MPI7002-7inch-C''' model with a rotation of 90 degrees. '''Lcd7c-show''' can be changed to the corresponding driver, and 90 can be changed to 0, 90, 180 and 270, respectively representing rotation angles of 0 degrees, 90 degrees, 180 degrees, 270 degrees) | |
− | *''' | + | *'''Method 2''',If the driver is already installed, execute the following command: |
{{code| | {{code| | ||
cd LCD-show/ | cd LCD-show/ | ||
sudo ./rotate.sh 90 | sudo ./rotate.sh 90 | ||
}} | }} | ||
− | + | After execution, the system will automatically restart, and the display screen will rotate 90 degrees to display normally. <br/> | |
− | + | ( 90 can be changed to 0, 90, 180 and 270, respectively representing rotation angles of 0 degrees, 90 degrees, 180 degrees, 270 degrees) <br/> | |
− | <font color="red"> | + | <font color="red">If the '''rotate.sh''' prompt cannot be found, use '''Method 1''' to install the latest drivers</font> |
Revision as of 17:06, 7 July 2019
How to rotate the display direction
This method only applies to the raspberry PI series of display screens, other display screens do not apply.
- Method 1,If the driver is not installed, execute the following command:
sudo rm -rf LCD-show git clone https://github.com/goodtft/LCD-show.git chmod -R 755 LCD-show cd LCD-show/ sudo ./LCD7C-show 90
After execution, the driver will be installed. The system will automatically restart, and the display screen will rotate 90 degrees to display normally.
(This is the MPI7002-7inch-C model with a rotation of 90 degrees. Lcd7c-show can be changed to the corresponding driver, and 90 can be changed to 0, 90, 180 and 270, respectively representing rotation angles of 0 degrees, 90 degrees, 180 degrees, 270 degrees)
- Method 2,If the driver is already installed, execute the following command:
cd LCD-show/ sudo ./rotate.sh 90
After execution, the system will automatically restart, and the display screen will rotate 90 degrees to display normally.
( 90 can be changed to 0, 90, 180 and 270, respectively representing rotation angles of 0 degrees, 90 degrees, 180 degrees, 270 degrees)
If the rotate.sh prompt cannot be found, use Method 1 to install the latest drivers