Difference between revisions of "3.97inch 16BIT Module OTM8009A SKU:MRB3971"
(Created page with "123") |
(→Interface Definition) |
||
(8 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
− | + | {{lan | |
+ | | | ||
+ | cn=http://www.lcdwiki.com/zh/3.97inch_16BIT_Module_OTM8009A_SKU:MRB3971 | ||
+ | | | ||
+ | en=http://www.lcdwiki.com/3.97inch_16BIT_Module_OTM8009A_SKU:MRB3971 | ||
+ | }} | ||
+ | |||
+ | == <font color="blue">Product Picture</font> == | ||
+ | [[File:MRB3973-002.jpg|300px]] [[File:MRB3973-004.jpg|300px]] [[File:MRB3973-003.jpg|300px]] | ||
+ | |||
+ | ==<font color="blue">Product Description</font> == | ||
+ | |||
+ | * 3.97-inch color screen, support 16BIT RGB 65K color display, display rich colors | ||
+ | * 800x480 resolution for clear display | ||
+ | * 16-bit parallel bus transmission for fast transfer speed | ||
+ | * Supports ALIENTEK STM32 Mini, Elite, WarShip, Explorer, and Apollo development boards for direct plug-in use | ||
+ | * Support for touch function | ||
+ | * Support SD card function expansion | ||
+ | * Provides a rich sample program for STM32 and C51 platforms | ||
+ | * Military-grade process standards, long-term stable work | ||
+ | * Provide underlying driver technical support | ||
+ | |||
+ | ==<font color="blue">Product Parameters</font> == | ||
+ | {| class="wikitable" border="1" style="width: 550px; background-color: white;" | ||
+ | | align="center" |Name | ||
+ | | align="center" |Parameter | ||
+ | |- | ||
+ | | align="center" |Display Color | ||
+ | | align="center" |16BIT RGB 65K color | ||
+ | |- | ||
+ | | align="center" |SKU | ||
+ | | align="center" |MRB3971 | ||
+ | |- | ||
+ | | align="center" |Screen Size | ||
+ | | align="center" |3.97(inch) | ||
+ | |- | ||
+ | | align="center" |Type | ||
+ | | align="center" |TFT | ||
+ | |- | ||
+ | | align="center" |Driver IC | ||
+ | | align="center" |OTM8009A | ||
+ | |- | ||
+ | | align="center" |Resolution | ||
+ | | align="center" |800*480 (Pixel) | ||
+ | |- | ||
+ | | align="center" |Module Interface | ||
+ | | align="center" |16Bit parallel interface | ||
+ | |- | ||
+ | | align="center" |Active Area | ||
+ | | align="center" |51.84x86.40(mm) | ||
+ | |- | ||
+ | | align="center" |Module PCB Size | ||
+ | | align="center" |59.18x111.51(mm) | ||
+ | |- | ||
+ | | align="center" |Operating Temperature | ||
+ | | align="center" | -20℃~60℃ | ||
+ | |- | ||
+ | | align="center" |Storage Temperature | ||
+ | | align="center" | -30℃~70℃ | ||
+ | |- | ||
+ | | align="center" |Operating Voltage | ||
+ | | align="center" |3.3V/5V | ||
+ | |- | ||
+ | | align="center" |Power Consumption | ||
+ | | align="center" |TBD | ||
+ | |- | ||
+ | | align="center" |Rough Weight(Package containing) | ||
+ | | align="center" |No touch: 50 (g) / With touch: 62 (g) | ||
+ | |} | ||
+ | |||
+ | ==<font color="blue">Interface Definition</font> == | ||
+ | [[File:MRB3973-006.png|550px]] | ||
+ | |||
+ | The module hardware supports '''8-bit''' and '''16-bit''' parallel port data bus mode switching (as shown by the red box in Picture 1 above), as follows: | ||
+ | :Solder '''R3''' and '''R4''' with 0Ω resistor or short circuit directly, and disconnect '''R2''' and '''R6''': select '''16-bit''' data bus mode ('''default'''), use '''DB0~DB15''' data pin | ||
+ | :Solder '''R2''' and '''R4''' with 0Ω resistor or short circuit directly, and disconnect '''R3''' and '''R6''': select '''8-bit''' data bus mode, use '''DB0~D7''' data pin | ||
+ | |||
+ | {| class="wikitable" border="1" style="width: 550px; background-color: white;" | ||
+ | | align="center" |Number | ||
+ | | align="center" |Pin Label | ||
+ | | align="center" |Description | ||
+ | |- | ||
+ | | align="center" |1 | ||
+ | | align="center" |CS | ||
+ | |LCD reset control pin( low level enable) | ||
+ | |- | ||
+ | | align="center" |2 | ||
+ | | align="center" |RS | ||
+ | |LCD register / data selection control pin(high level: register, low level: data) | ||
+ | |- | ||
+ | | align="center" |3 | ||
+ | | align="center" |WR | ||
+ | |LCD write control pin | ||
+ | |- | ||
+ | | align="center" |4 | ||
+ | | align="center" |RD | ||
+ | |LCD read control pin | ||
+ | |- | ||
+ | | align="center" |5 | ||
+ | | align="center" |RST | ||
+ | |LCD reset control pin( low level reset) | ||
+ | |- | ||
+ | | align="center" |6 | ||
+ | | align="center" |DB0 | ||
+ | | rowspan="8" |LCD data bus low 8-bit pin | ||
+ | |- | ||
+ | | align="center" |7 | ||
+ | | align="center" |DB1 | ||
+ | |- | ||
+ | | align="center" |8 | ||
+ | | align="center" |DB2 | ||
+ | |- | ||
+ | | align="center" |9 | ||
+ | | align="center" |DB3 | ||
+ | |- | ||
+ | | align="center" |10 | ||
+ | | align="center" |DB4 | ||
+ | |- | ||
+ | | align="center" |11 | ||
+ | | align="center" |DB5 | ||
+ | |- | ||
+ | | align="center" |12 | ||
+ | | align="center" |DB6 | ||
+ | |- | ||
+ | | align="center" |13 | ||
+ | | align="center" |DB7 | ||
+ | |- | ||
+ | | align="center" |14 | ||
+ | | align="center" |DB8 | ||
+ | | rowspan="8" |LCD data bus high 8-bit pin | ||
+ | |- | ||
+ | | align="center" |15 | ||
+ | | align="center" |DB9 | ||
+ | |- | ||
+ | | align="center" |16 | ||
+ | | align="center" |DB10 | ||
+ | |- | ||
+ | | align="center" |17 | ||
+ | | align="center" |DB11 | ||
+ | |- | ||
+ | | align="center" |18 | ||
+ | | align="center" |DB12 | ||
+ | |- | ||
+ | | align="center" |19 | ||
+ | | align="center" |DB13 | ||
+ | |- | ||
+ | | align="center" |20 | ||
+ | | align="center" |DB14 | ||
+ | |- | ||
+ | | align="center" |21 | ||
+ | | align="center" |DB15 | ||
+ | |- | ||
+ | | align="center" |22 | ||
+ | | align="center" |NC | ||
+ | |Undefined, reserved | ||
+ | |- | ||
+ | | align="center" |23 | ||
+ | | align="center" |BL | ||
+ | |LCD backlight control pin(High level light) | ||
+ | |- | ||
+ | | align="center" |24 | ||
+ | | align="center" |VCC | ||
+ | | rowspan="2" |Module power positive pin (module has integrated voltage regulator IC, so the power supply can be connected to 5V or 3.3V) | ||
+ | |- | ||
+ | | align="center" |25 | ||
+ | | align="center" |VCC | ||
+ | |- | ||
+ | | align="center" |26 | ||
+ | | align="center" |GND | ||
+ | | rowspan="2" |Module power ground pin | ||
+ | |- | ||
+ | | align="center" |27 | ||
+ | | align="center" |GND | ||
+ | |- | ||
+ | | align="center" |28 | ||
+ | | align="center" |NC | ||
+ | |Undefined, reserved | ||
+ | |- | ||
+ | | align="center" |29 | ||
+ | | align="center" |MISO | ||
+ | |Touch screen SPI bus data input pin | ||
+ | |- | ||
+ | | align="center" |30 | ||
+ | | align="center" |MOSI | ||
+ | |Touch screen SPI bus data output pin | ||
+ | |- | ||
+ | | align="center" |31 | ||
+ | | align="center" |PEN | ||
+ | |Touch screen interrupt detection pin(Low level when a touch occurs) | ||
+ | |- | ||
+ | | align="center" |32 | ||
+ | | align="center" |NC | ||
+ | |Undefined, reserved | ||
+ | |- | ||
+ | | align="center" |33 | ||
+ | | align="center" |T_CS | ||
+ | |Touch screen IC chip select control pin(Low level enable) | ||
+ | |- | ||
+ | | align="center" |34 | ||
+ | | align="center" |CLK | ||
+ | |Touch screen SPI bus clock control pin | ||
+ | |- | ||
+ | |} | ||
+ | |||
+ | ==<font color="blue">How to use on STM32 development board</font> == | ||
+ | |||
+ | This module is compatible with the ALIENTEK STM32 development board. The specific usage is as follows: | ||
+ | |||
+ | *'''Step 1: Download the test program''' | ||
+ | |||
+ | # Download the STM32 Mini development board IO emulation or other development board FSMC test program from the [[#Program Download|'''Program Download''']] column (only these programs support the STM32 development board in-line) | ||
+ | # You can also download the standard routines that come with the punctual atomic STM32 development board | ||
+ | # For a description of the relevant test procedures, please refer to the test program documentation in the package | ||
+ | |||
+ | *'''Step 2: Connect the STM32 development board''' | ||
+ | |||
+ | # Find the TFTLCD interface on the development board, connect the module pins and interfaces, and then plug them directly into | ||
+ | |||
+ | ::the interface(for the connection method, please refer to the instructions of the ALIENTEK STM32 development board) | ||
+ | |||
+ | *'''Step 3: Compile and download the program to the development board''' | ||
+ | |||
+ | # Compile and download the program you need to test to the STM32 development board([http://www.lcdwiki.com/res/PublicFile/STM32_Keil_Use_Illustration_CN.pdf <font color="red"> '''Don't know how to compile and download?'''</font>]) | ||
+ | |||
+ | *'''Step 4: Observe the running of the program''' | ||
+ | |||
+ | # After the program is finished, observe the running status of the program. If it can be displayed normally, the program runs successfully. | ||
+ | |||
+ | ==<font color="blue">Program Download</font> == | ||
+ | |||
+ | * [http://www.lcdwiki.com/res/Program/Parallel_Port/3.97inch/16BIT_OTM8009A_MRB3971_V1.0/3.97inch_16BIT_Module_OTM8009A_MRB3971_V1.0.zip '''3.97inch 16bit Parallel-Port Module package'''] | ||
+ | |||
+ | ==<font color="blue">Product Documentation</font> == | ||
+ | |||
+ | * [http://www.lcdwiki.com/res/MRB3971/3.97inch_16BIT_Module_MRB3971_User_Manual_EN.pdf '''3.97inch 16bit Parallel-Port Module User Manual'''] | ||
+ | * [http://www.lcdwiki.com/res/MRB3971/BY-T40VB19R3C%20V02.pdf '''3.97inch TFTLCD Specification'''] | ||
+ | * [http://www.lcdwiki.com/res/MRB3971/3.97inch_MRB3971_Size.pdf '''3.97inch 16bit Parallel-Port Module Size Picture'''] | ||
+ | * [http://www.lcdwiki.com/res/MRB3971/3.97inch_MRB3971_Schematic.pdf '''3.97inch 16bit Parallel-Port Module Schematic'''] | ||
+ | * [http://www.lcdwiki.com/res/MRB3971/Altium_Package_Library.zip '''3.97inch 16bit Parallel-Port Module LCD Schematic and PCB Package Library'''] | ||
+ | * [http://www.lcdwiki.com/res/MRB3971/DATA_SHEET_OTM8009A_V08_IVO.pdf '''Driver IC OTM8009A Data sheet'''] | ||
+ | |||
+ | ==<font color="blue">Reference Materials</font> == | ||
+ | |||
+ | * [http://www.lcdwiki.com/res/PublicFile/C51_Keil%26stc-isp_Use_Illustration_EN.pdf '''C51 Keil and stc-isp software use illustration'''] | ||
+ | * [http://www.lcdwiki.com/res/PublicFile/STM32_Keil_Use_Illustration_EN.pdf '''STM32 keil software use illustration'''] | ||
+ | * [http://www.lcdwiki.com/res/PublicFile/PCtoLCD2002_Use_Illustration_EN.pdf '''PCtoLCD2002 software use illustration'''] | ||
+ | * [http://www.lcdwiki.com/res/PublicFile/Image2Lcd_Use_Illustration_EN.pdf '''Image2Lcd software use illustration'''] | ||
+ | * [http://www.lcdwiki.com/Chinese_and_English_display_modulo_settings '''Chinese and English display modulo settings'''] | ||
+ | |||
+ | ==<font color="blue">Common Software</font> == | ||
+ | |||
+ | * [http://www.lcdwiki.com/res/software/PCtoLCD2002.zip '''PCtoLCD2002'''] | ||
+ | * [http://www.lcdwiki.com/res/software/Image2Lcd.zip '''Image2Lcd'''] | ||
+ | |||
+ | [[#top|BACK TO TOP]] |
Latest revision as of 14:13, 28 September 2019
Contents
Product Picture
Product Description
- 3.97-inch color screen, support 16BIT RGB 65K color display, display rich colors
- 800x480 resolution for clear display
- 16-bit parallel bus transmission for fast transfer speed
- Supports ALIENTEK STM32 Mini, Elite, WarShip, Explorer, and Apollo development boards for direct plug-in use
- Support for touch function
- Support SD card function expansion
- Provides a rich sample program for STM32 and C51 platforms
- Military-grade process standards, long-term stable work
- Provide underlying driver technical support
Product Parameters
Name | Parameter |
Display Color | 16BIT RGB 65K color |
SKU | MRB3971 |
Screen Size | 3.97(inch) |
Type | TFT |
Driver IC | OTM8009A |
Resolution | 800*480 (Pixel) |
Module Interface | 16Bit parallel interface |
Active Area | 51.84x86.40(mm) |
Module PCB Size | 59.18x111.51(mm) |
Operating Temperature | -20℃~60℃ |
Storage Temperature | -30℃~70℃ |
Operating Voltage | 3.3V/5V |
Power Consumption | TBD |
Rough Weight(Package containing) | No touch: 50 (g) / With touch: 62 (g) |
Interface Definition
The module hardware supports 8-bit and 16-bit parallel port data bus mode switching (as shown by the red box in Picture 1 above), as follows:
- Solder R3 and R4 with 0Ω resistor or short circuit directly, and disconnect R2 and R6: select 16-bit data bus mode (default), use DB0~DB15 data pin
- Solder R2 and R4 with 0Ω resistor or short circuit directly, and disconnect R3 and R6: select 8-bit data bus mode, use DB0~D7 data pin
Number | Pin Label | Description |
1 | CS | LCD reset control pin( low level enable) |
2 | RS | LCD register / data selection control pin(high level: register, low level: data) |
3 | WR | LCD write control pin |
4 | RD | LCD read control pin |
5 | RST | LCD reset control pin( low level reset) |
6 | DB0 | LCD data bus low 8-bit pin |
7 | DB1 | |
8 | DB2 | |
9 | DB3 | |
10 | DB4 | |
11 | DB5 | |
12 | DB6 | |
13 | DB7 | |
14 | DB8 | LCD data bus high 8-bit pin |
15 | DB9 | |
16 | DB10 | |
17 | DB11 | |
18 | DB12 | |
19 | DB13 | |
20 | DB14 | |
21 | DB15 | |
22 | NC | Undefined, reserved |
23 | BL | LCD backlight control pin(High level light) |
24 | VCC | Module power positive pin (module has integrated voltage regulator IC, so the power supply can be connected to 5V or 3.3V) |
25 | VCC | |
26 | GND | Module power ground pin |
27 | GND | |
28 | NC | Undefined, reserved |
29 | MISO | Touch screen SPI bus data input pin |
30 | MOSI | Touch screen SPI bus data output pin |
31 | PEN | Touch screen interrupt detection pin(Low level when a touch occurs) |
32 | NC | Undefined, reserved |
33 | T_CS | Touch screen IC chip select control pin(Low level enable) |
34 | CLK | Touch screen SPI bus clock control pin |
How to use on STM32 development board
This module is compatible with the ALIENTEK STM32 development board. The specific usage is as follows:
- Step 1: Download the test program
- Download the STM32 Mini development board IO emulation or other development board FSMC test program from the Program Download column (only these programs support the STM32 development board in-line)
- You can also download the standard routines that come with the punctual atomic STM32 development board
- For a description of the relevant test procedures, please refer to the test program documentation in the package
- Step 2: Connect the STM32 development board
- Find the TFTLCD interface on the development board, connect the module pins and interfaces, and then plug them directly into
- the interface(for the connection method, please refer to the instructions of the ALIENTEK STM32 development board)
- Step 3: Compile and download the program to the development board
- Compile and download the program you need to test to the STM32 development board( Don't know how to compile and download?)
- Step 4: Observe the running of the program
- After the program is finished, observe the running status of the program. If it can be displayed normally, the program runs successfully.
Program Download
Product Documentation
- 3.97inch 16bit Parallel-Port Module User Manual
- 3.97inch TFTLCD Specification
- 3.97inch 16bit Parallel-Port Module Size Picture
- 3.97inch 16bit Parallel-Port Module Schematic
- 3.97inch 16bit Parallel-Port Module LCD Schematic and PCB Package Library
- Driver IC OTM8009A Data sheet
Reference Materials
- C51 Keil and stc-isp software use illustration
- STM32 keil software use illustration
- PCtoLCD2002 software use illustration
- Image2Lcd software use illustration
- Chinese and English display modulo settings