Difference between revisions of "DSI series screen will have no touch or display when using the latest official 2022-04-04 system of Raspberry Pi"
(Created page with "最近有些客户反映:DSI系列的屏(4.3寸,5寸,7寸),用树莓派官方最新2022-04-04的系统时,会无触摸,偶尔开机会无显示! '''Reason:'''...") |
|||
Line 1: | Line 1: | ||
− | + | Recently, some customers have reported that the DSI series screen (4.3 inches, 5 inches, 7 inches) will not be touched when using the latest official 2022-04-04 system of Raspberry Pi, and there will be no display when it is occasionally turned on! | |
'''Reason:''' <br> | '''Reason:''' <br> | ||
− | + | Some configurations of the latest official 2022-04-04 system of raspberry pie do not match the original firmware of the DSI series screen | |
+ | (the firmware of the latest version of the DSI series screen has been updated, so this problem does not exist) | ||
'''Solution::''' <br> | '''Solution::''' <br> | ||
− | 1. | + | 1.Open 'config.txt' |
{{code| | {{code| | ||
sudo nano /boot/config.txt }} | sudo nano /boot/config.txt }} |
Revision as of 13:50, 21 July 2022
Recently, some customers have reported that the DSI series screen (4.3 inches, 5 inches, 7 inches) will not be touched when using the latest official 2022-04-04 system of Raspberry Pi, and there will be no display when it is occasionally turned on!
Reason:
Some configurations of the latest official 2022-04-04 system of raspberry pie do not match the original firmware of the DSI series screen
(the firmware of the latest version of the DSI series screen has been updated, so this problem does not exist)
Solution::
1.Open 'config.txt'
sudo nano /boot/config.txt
2.Change 'dtoverlay=vc4-kms-v3d' to ' #dtoverlay=vc4-kms-v3d '
3.Ctrl+X准备退出; 按Y确认,保存;按Enter,退出
4.Restart:
sudo reboot