2.4inch SPI Module ILI9341 SKU:MSP2402: Difference between revisions

Latest revision as of 15:27, 8 August 2024

语言选择 Languages
➤中文
➤EN

Product Picture

Product Description

2.4-inch color screen,support 65K color display,display rich colors
320X240 resolution, optional touch function
Using the SPI serial bus, it only takes a few IOs to illuminate the display
Easy to expand the experiment with SD card slot
Provide a rich sample program
Military-grade process standards, long-term stable work
Provide underlying driver technical support

Product Parameters

Name	Parameter
Display Color	RGB 65K color
SKU	have touch screen: MSP2402
SKU	have no touch screen: MSP2401
Screen Size	2.4(inch)
Type	TFT
Driver IC	ILI9341
Resolution	320*240 (Pixel)
Module Interface	4-wire SPI interface
Active Area (AA area)	36.72x48.96(mm)
Module PCB Size	77.18x42.72(mm)
Operating Temperature	-20℃~60℃
Storage Temperature	-30℃~70℃
VCC power voltage	3.3V~5V
Logic IO port voltage	3.3V(TTL)
Power Consumption	TBD
Rough Weight(Package containing)	No touch: 26(g) / With touch: 36(g)

Interface Definition

Number	Pin Label	Description
1	VCC	5V/3.3V power input
2	GND	Ground
3	CS	LCD chip select signal, low level enable
4	RESET	LCD reset signal, low level reset
5	DC/RS	LCD register / data selection signal, high level: register, low level: data
6	SDI(MOSI)	SPI bus write data signal
7	SCK	SPI bus clock signal
8	LED	Backlight control, high level lighting, if not controlled, connect 3.3V always bright
9	SDO(MISO)	SPI bus read data signal, if you do not need to the read function, you can not connect it
(The following is the touch screen signal line wiring, if you do not need to touch function or the module itself does not have touch function, you can not connect them)
10	T_CLK	Touch SPI bus clock signal
11	T_CS	Touch screen chip select signal, low level enable
12	T_DIN	Touch SPI bus input
13	T_DO	Touch SPI bus output
14	T_IRQ	Touch screen interrupt signal, low level when touch is detected

@@ Line 5: / Line 5: @@
 en=http://www.lcdwiki.com/2.4inch_SPI_Module_ILI9341_SKU:MSP2402
 }}
-==<font color="blue">Product Video</font> ==
 ==<font color="blue">Product Picture</font> ==
@@ Line 13: / Line 11: @@
 ==<font color="blue">Product Description</font> ==
-* 2.2-inch color screen,support 65K color display,display rich colors
+* 2.4-inch color screen,support 65K color display,display rich colors
-* 320X240 resolution, clear display
+* 320X240 resolution, optional touch function
 * Using the SPI serial bus, it only takes a few IOs to illuminate the display
 * Easy to expand the experiment with SD card slot
@@ Line 29: / Line 27: @@
 | align="center" |RGB 65K color
 |-
-| align="center" |SKU
+| rowspan="2" align="center" |SKU
-| align="center" |MSP2202
+| align="center" |have touch screen: MSP2402
+|-
+| align="center" |have no touch screen: MSP2401
 |-
 | align="center" |Screen Size
-| align="center" |2.2(inch)
+| align="center" |2.4(inch)
 |-
 | align="center" |Type
@@ Line 48: / Line 48: @@
 |-
 | align="center" |Active Area (AA area)
-| align="center" |33.84x45.12(mm)
+| align="center" |36.72x48.96(mm)
 |-
 | align="center" |Module PCB Size
-| align="center" |40.10x67.20(mm)
+| align="center" |77.18x42.72(mm)
 |-
 | align="center" |Operating Temperature
-| align="center" | -20℃~70℃
+| align="center" | -20℃~60℃
 |-
 | align="center" |Storage Temperature
-| align="center" | -30℃~80℃
+| align="center" | -30℃~70℃
 |-
 | align="center" |VCC power voltage
@@ Line 66: / Line 66: @@
 |-
 | align="center" |Power Consumption
-| align="center" |About 90mA
+| align="center" |TBD
 |-
-| align="center" |Product Weight
+| align="center" |Rough Weight(Package containing)
-| align="center" |25(g)
+| align="center" |No touch: 26(g) / With touch: 36(g)
 |}
 ==<font color="blue">Interface Definition</font> ==
-[[File:MSP2202-007.jpg|500px]]
+[[File:MSP2402-009.jpg|500px]]
-{| class="wikitable" border="1" style="width: 550px; background-color: white;"
+{| class="wikitable" border="1" style="width: 600px; background-color: white;"
 | align="center" |Number
 | align="center" |Pin Label
@@ Line 101: / Line 101: @@
 |-
 | align="center" |6
-| align="center" |SDI/MOSI
+| align="center" |SDI(MOSI)
 |SPI bus write data signal
 |-
@@ Line 114: / Line 114: @@
 |-
 | align="center" |9
-| align="center" |SDO/MISO
+| align="center" |SDO(MISO)
 |SPI bus read data signal, if you do not need to the read function, you can not connect it
+|-
+| colspan="3" |(The following is the touch screen signal line wiring, if you do not need to touch function or the module itself does not have touch function, you can not connect them)
+|-
+| align="center" |10
+| align="center" |T_CLK
+|Touch SPI bus clock signal
+|-
+| align="center" |11
+| align="center" |T_CS
+|Touch screen chip select signal, low level enable
+|-
+| align="center" |12
+| align="center" |T_DIN
+|Touch SPI bus input
+|-
+| align="center" |13
+| align="center" |T_DO
+|Touch SPI bus output
+|-
+| align="center" |14
+| align="center" |T_IRQ
+|Touch screen interrupt signal, low level when touch is detected
 |-
 |}
@@ Line 121: / Line 143: @@
 ==<font color="blue">Product Documentation</font> ==
-* [http://www.lcdwiki.com/res/MSP2202/2.2inch_SPI_Module_MSP2202_User_Manual_EN.pdf '''2.2 inch SPI Module User Manual''']
+* [[File:Pdf-001.jpg|24x24px]] [http://www.lcdwiki.com/res/MSP2402/2.4inch_SPI_Module_MSP2402_User_Manual_EN.pdf '''2.4 inch SPI Module User Manual''']
-* [http://www.lcdwiki.com/res/MSP2202/QDTFT2001_specification_v1.1.pdf '''2.2 inch TFT Specifications''']
+* [[File:Pdf-001.jpg|24x24px]] [http://www.lcdwiki.com/res/MSP2402/QD241801_specification_v1.1.pdf '''2.4 inch TFT Specifications''']
-* [http://www.lcdwiki.com/images/7/7c/MSP2202-002.png '''2.2 inch SPI Module Size Picture''']
+* [[File:Pdf-001.jpg|24x24px]] [http://www.lcdwiki.com/res/MSP2402/2.4inch_SPI_Module_Size.pdf  '''2.4 inch SPI Module Size Picture''']
-* [http://www.lcdwiki.com/res/MSP2202/MSP2202-2.2-SPI.pdf '''2.2 inch SPI Module Schematic''']
+* [[File:Pdf-001.jpg|24x24px]] [http://www.lcdwiki.com/res/MSP2402/MSP2402-2.4-SPI.pdf '''2.4 inch SPI Module Schematic''']
-* [http://www.lcdwiki.com/res/MSP2202/ILI9341_Datasheet.pdf '''Driver IC ILI9341 Data sheet''']
+* [[File:Pdf-001.jpg|24x24px]] [http://www.lcdwiki.com/res/MSP2402/ILI9341_Datasheet.pdf '''Driver IC ILI9341 Data sheet''']
 ==<font color="blue">Program Download</font> ==
-# [https://yunpan.360.cn/surl_ymT4ZiABZZr '''Demo_Arduino_Mega2560_Hardware_SPI''']
+* [[File:Zip-001.png|24x24px]]  [http://www.lcdwiki.com/res/Program/Common_SPI/2.4inch/SPI_ILI9341_MSP2402_V1.1/2.4inch_SPI_Module_ILI9341_MSP2402_V1.1.zip '''2.4 inch SPI Module Package''']
-# [https://yunpan.360.cn/surl_ymT4V4NeEBs '''Demo_Arduino_Mega2560_Software_SPI''']
-# [https://yunpan.360.cn/surl_ymT4wmeptsw '''Demo_Arduino_UNO_Hardware_SPI''']
-# [https://yunpan.360.cn/surl_ymT4QgINb3f '''Demo_Arduino_UNO_Software_SPI''']
-# [https://yunpan.360.cn/surl_ymT4QX9BH85 '''Demo_C51_STC12C5A60S2_Hardware_SPI''']
-# [https://yunpan.360.cn/surl_ymT4c3eIBpH '''Demo_C51_STC12C5A60S2_Software_SPI''']
-# [https://yunpan.360.cn/surl_ymT4cac7Byv '''Demo_C51_STC89C52RC_Software_SPI''']
-# [https://yunpan.360.cn/surl_ymT4dvR5TLk '''Demo_STM32F103RCT6_Hardware_SPI''']
-# [https://yunpan.360.cn/surl_ymT4myxpzMc '''Demo_STM32F103RCT6_Software_SPI''']
-# [https://yunpan.360.cn/surl_ymT4mXhCD96 '''Demo_STM32F103ZET6_Hardware_SPI''']
-# [https://yunpan.360.cn/surl_ymT4HVICxhd '''Demo_STM32F103ZET6_Software_SPI''']
-# [https://yunpan.360.cn/surl_ymT4HbJEpjc '''Demo_STM32F407ZGT6_Hardware_SPI''']
-# [https://yunpan.360.cn/surl_ymT4FrsgAY4 '''Demo_STM32F407ZGT6_Software_SPI''']
-# [https://yunpan.360.cn/surl_ymT4LZNUNXx '''Demo_STM32F429IGT6_Hardware_SPI''']
-# [https://yunpan.360.cn/surl_ymT4L5Vmgiq '''Demo_STM32F429IGT6_Software_SPI''']
-* [https://yunpan.360.cn/surl_ymT43KGaxyD '''2.2 inch SPI Module Package(The above program is packaged with one click download)''']
 ==<font color="blue">Reference Materials</font> ==
@@ Line 158: / Line 164: @@
 ==<font color="blue">How to use on Arduino</font> ==
-* [http://www.lcdwiki.com/zh/Run_Arduino_Demo_in_spi_model '''Module instructions for use on the Arduino''']
+* [http://www.lcdwiki.com/Run_Arduino_Demo_in_spi_model '''Module instructions for use on the Arduino''']
 ==<font color="blue">Common Software</font> ==