Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Chinese and English display modulo settings: Difference between revisions

From LCD wiki
Lin (talk | contribs)
Lin (talk | contribs)
No edit summary
 
(21 intermediate revisions by the same user not shown)
Line 7: Line 7:
*'''Font and size selection'''
*'''Font and size selection'''
:[[File:MSP130W-002.jpg|750px]]
:[[File:MSP130W-002.jpg|750px]]
:Mode needs to select'''字符模式'''
:Mode needs to select '''字符模式'''
:Fonts can be selected according to needs, such as selection'''宋体'''   
:Fonts can be selected according to needs, such as selection '''宋体'''   
:The word width and word height can be selected according to the needs. The font sizes commonly used in Chinese and English are as follows:
:The word width and word height can be selected according to the needs. The font sizes commonly used in Chinese and English are as follows:
:Chinese (word width x word height):'''16x16、24x24、32x32'''
:Chinese (word width x word height):'''16x16、24x24、32x32、48x48'''
:English (character x word height):'''6x8、6x12、8x16、12x24、16x32('''The corresponding font size needs to be set to respectively'''12x8、12x12、16x16、24x24、32x32)'''
:English (character x word height):'''6x8、6x12、8x16、12x24、16x32、24x48('''The corresponding font size needs to be set to respectively'''12x8、12x12、16x16、24x24、32x32、48x48)'''
:Modify the dot matrix size can be set according to requirements, generally set to'''0'''
:Modify the dot matrix size can be set according to requirements, generally set to '''0'''


*'''Font option setting'''
*'''Font option setting'''
:There are many situations in the font option setting. Different settings and different code processing methods.  
:There are many situations in the Chinese and English font option setting. Different settings and different code processing methods.  
:Here is an example of the following settings, the subsequent function code is written based on this setting.
:Here is an example of the following settings, the subsequent function code is written based on this setting.
:[[File:MSP130W-001.jpg|750px]]
:[[File:MSP130W-001.jpg|750px]]
Line 75: Line 75:


== <font color="blue">English character modulo</font> ==
== <font color="blue">English character modulo</font> ==
'''Important note'''
*'''[[#English character modulo|Important note]]'''
:1.Because in the program, the English characters that need to be displayed are searched according to the ASCII offset,  
:1.Because in the program, the English characters that need to be displayed are searched according to the ASCII offset,  
::so the entire set of ASCII characters needs to be modeled.
::so the entire set of ASCII characters needs to be modeled.
Line 96: Line 96:
:3.The ASCII characters are as follows (the first space is also included):
:3.The ASCII characters are as follows (the first space is also included):
::ASCII characters: !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
::ASCII characters: !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
:4.The following modulo data fonts are all '''Default'''
:4.The English modulo data fonts are all '''Default'''
*'''6x8 English font modulo description'''
:The size settings are as shown below:
:[[File:Module-009.jpg|750px]]
:The function is defined as follows:
{{code|1=
static void LCD_Show_0806_char(u16 x,u16 y,u16 fc, u16 bc, u8 num,u8 mode)
{
    u8 temp;
    u8 pos,t;
    u16 colortemp=POINT_COLOR;       
    num=num-' ';//Get the offset value
    LCD_SetWindows(x,y,x+6-1,y+8-1);//Set a single text display window
    if(!mode) //Non-overlay mode: The font has a background color, which will overwrite the original display
    {
        for(pos=0;pos<8;pos++)
{
    temp = asc2_0806[num][pos];//Call 0806 font, you need to take the model definition
    for(t=0;t<6;t++)
            {               
        if(temp&0x80)
        {
    Lcd_WriteData_16Bit(fc);
}
else
{
    Lcd_WriteData_16Bit(bc);
}
temp<<=1;
    }
}
    }
    else//Overlay mode: the font does not have a background color, and is directly superimposed and displayed on the original display content
    {
for(pos=0;pos<8;pos++)
{
    temp = asc2_0806[num][pos];//Call 0806 font, you need to take the model definition
    for(t=0;t<6;t++)
            { 
POINT_COLOR=fc;             
if(temp&0x80)
{
    LCD_DrawPoint(x+t,y+pos);//Draw a point     
}
temp<<=1;
    }
}
    }
    POINT_COLOR=colortemp;
    LCD_SetWindows(0,0,lcddev.width-1,lcddev.height-1);//Restore window to full screen     
<nowiki>}</nowiki>
}}


*'''6x12 English font modulo description'''
*'''The different sizes of English character modulo description'''
:The size settings are as shown below:
:*[http://www.lcdwiki.com/6x8_English_font_modulo_description '''6x8 English font modulo description''']
:[[File:Module-010.jpg|750px]]
:*[http://www.lcdwiki.com/6x12_English_font_modulo_description '''6x12 English font modulo description''']
:The function is defined as follows:
:*[http://www.lcdwiki.com/8x16_English_font_modulo_description '''8x16 English font modulo description''']
{{code|1=
:*[http://www.lcdwiki.com/12x24_English_font_modulo_description '''12x24 English font modulo description''']
static void LCD_Show_1206_char(u16 x,u16 y,u16 fc, u16 bc, u8 num,u8 mode)
:*[http://www.lcdwiki.com/16x32_English_font_modulo_description '''16x32 English font modulo description''']
{
:*[http://www.lcdwiki.com/24x48_English_font_modulo_description '''24x48 English font modulo description''']
    u8 temp;
:*[http://www.lcdwiki.com/32x64_English_font_modulo_description '''32x64 English font modulo description''']
    u8 pos,t;
:*[http://www.lcdwiki.com/48x96_English_font_modulo_description '''48x96 English font modulo description''']
    u16 colortemp=POINT_COLOR;       
:*[http://www.lcdwiki.com/64x128_English_font_modulo_description '''64x128 English font modulo description''']
    num=num-' ';//Get the offset value
    LCD_SetWindows(x,y,x+6-1,y+12-1);//Set a single text display window
    if(!mode) //Non-overlay mode: The font has a background color, which will overwrite the original display
    {
        for(pos=0;pos<12;pos++)
{
    temp = asc2_1206[num][pos];//Call 1206 font, you need to take the model definition
    for(t=0;t<6;t++)
            {               
if(temp&0x80)
{
    Lcd_WriteData_16Bit(fc);
}
else
{
    Lcd_WriteData_16Bit(bc);
}
temp<<=1;
    }
}
    }
    else//Overlay mode: the font does not have a background color, and is directly superimposed and displayed on the original display content
    {
for(pos=0;pos<12;pos++)
{
    temp = asc2_1206[num][pos];//Call 1206 font, you need to take the model definition
    for(t=0;t<6;t++)
    { 
POINT_COLOR=fc;             
if(temp&0x80)
{
    LCD_DrawPoint(x+t,y+pos);//Draw a point   
}
temp<<=1;
    }
}
    }
    POINT_COLOR=colortemp;
    LCD_SetWindows(0,0,lcddev.width-1,lcddev.height-1);//Restore window to full screen         
<nowiki>}</nowiki>
}}


*'''8x16 English font modulo description'''
:The size settings are as shown below:
:[[File:Module-011.jpg|750px]]
:The function is defined as follows:
{{code|1=
static void LCD_Show_1608_char(u16 x,u16 y,u16 fc, u16 bc, u8 num,u8 mode)
{
    u8 temp;
    u8 pos,t;
    u16 colortemp=POINT_COLOR;       
    num=num-' ';//Get the offset value
    LCD_SetWindows(x,y,x+8-1,y+16-1);//Set a single text display window
    if(!mode) //Non-overlay mode: The font has a background color, which will overwrite the original display
    {
for(pos=0;pos<16;pos++)
{
    temp = asc2_1608[num][pos];//Call 1608 font, you need to take the model definition
    for(t=0;t<8;t++)
            {               
if(temp&0x80)
        {
    Lcd_WriteData_16Bit(fc);
}
else
{
    Lcd_WriteData_16Bit(bc);
}
temp<<=1;
    }
}
    }
    else//Overlay mode: the font does not have a background color, and is directly superimposed and displayed on the original display content
    {
for(pos=0;pos<16;pos++)
{
    temp = asc2_1608[num][pos];//Call 1608 font, you need to take the model definition
    for(t=0;t<8;t++)
    { 
POINT_COLOR=fc;             
if(temp&0x80)
{
    LCD_DrawPoint(x+t,y+pos);//Draw a point   
}
temp<<=1;
    }
}
    }
    POINT_COLOR=colortemp;
    LCD_SetWindows(0,0,lcddev.width-1,lcddev.height-1);//Restore window to full screen           
<nowiki>}</nowiki>
}}


*'''12x24 English font modulo description'''
== <font color="blue">Chinese character modulo</font> ==
:The size settings are as shown below:
*'''[[#Chinese character modulo|Important note]]'''
:[[File:Module-012.jpg|750px]]
:1.When displaying Chinese characters, the modulo data is obtained by querying the GBK code that needs to display Chinese characters;
:The function is defined as follows:
:2.After the Chinese character is successfully modulo, the corresponding relationship between the Chinese character GBK code and the modulo data is saved through an array of structures.
:3.The structure is defined as follows:
{{code|1=
{{code|1=
static void LCD_Show_2412_char(u16 x,u16 y,u16 fc, u16 bc, u8 num,u8 mode)
//16x16 Chinese font structure definition
typedef struct
{
{
    u16 temp;
      unsigned char Index[2]; //Store Chinese character GBK code
    u8 pos,t;
      char Msk[32]; //Store Chinese character modulo data
    u16 colortemp=POINT_COLOR;       
}typFNT_GB16; //Structure name can be defined by yourself
    num=num-' ';//Get the offset value
    LCD_SetWindows(x,y,x+12-1,y+24-1);//Set a single text display window
    if(!mode) //Non-overlay mode: The font has a background color, which will overwrite the original display
    {
for(pos=0;pos<24;pos++)
{
    temp = (asc2_2412[num][pos*2]<<8)<nowiki>|</nowiki>asc2_2412[num][pos*2+1];//Call 2412 font, you need to take the model definition
    for(t=0;t<12;t++)
    {               
        if(temp&0x8000)
{
    Lcd_WriteData_16Bit(fc);
}
else
{
    Lcd_WriteData_16Bit(bc);
}
temp<<=1;
    }
}
    }
    else//Overlay mode: the font does not have a background color, and is directly superimposed and displayed on the original display content
    {
for(pos=0;pos<24;pos++)
        {
    temp = (asc2_2412[num][pos*2]<<8)<nowiki>|</nowiki>asc2_2412[num][pos*2+1];//Call 2412 font, you need to take the model definition
    for(t=0;t<12;t++)
    { 
POINT_COLOR=fc;             
if(temp&0x8000)
{
    LCD_DrawPoint(x+t,y+pos);//Draw a point   
}
temp<<=1;
    }
        }
    }
    POINT_COLOR=colortemp;
    LCD_SetWindows(0,0,lcddev.width-1,lcddev.height-1);//Restore window to full screen       
<nowiki>}</nowiki>
}}


*'''16x32 English font modulo description'''
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
:The size settings are as shown below:
//24x24 Chinese font structure definition
:[[File:Module-013.jpg|750px]]
typedef struct
:The function is defined as follows:
{{code|1=
static void LCD_Show_3216_char(u16 x,u16 y,u16 fc, u16 bc, u8 num,u8 mode)
{
{
    u16 temp;
      unsigned char Index[2]; //Store Chinese character GBK code
    u8 pos,t;
      char Msk[72]; //Store Chinese character modulo data
    u16 colortemp=POINT_COLOR;       
}typFNT_GB24; //Structure name can be defined by yourself
    num=num-' ';//Get the offset value
    LCD_SetWindows(x,y,x+16-1,y+32-1);//Set a single text display window
    if(!mode) //Non-overlay mode: The font has a background color, which will overwrite the original display
    {
for(pos=0;pos<32;pos++)
{
    temp = (asc2_3216[num][pos*2]<<8)<nowiki>|</nowiki>asc2_3216[num][pos*2+1];//Call 3216 font, you need to take the model definition
    for(t=0;t<16;t++)
    {               
if(temp&0x8000)
{
    Lcd_WriteData_16Bit(fc);
}
else
{
    Lcd_WriteData_16Bit(bc);
}
temp<<=1;
    }
}
    }
    else//Overlay mode: the font does not have a background color, and is directly superimposed and displayed on the original display content
    {
        for(pos=0;pos<32;pos++)
{
    temp = (asc2_3216[num][pos*2]<<8)<nowiki>|</nowiki>asc2_3216[num][pos*2+1];//Call 3216 font, you need to take the model definition
    for(t=0;t<16;t++)
    { 
POINT_COLOR=fc;             
if(temp&(0x8000))
{
    LCD_DrawPoint(x+t,y+pos);//Draw a point   
}
temp<<=1;
    }
}
    }
    POINT_COLOR=colortemp;
    LCD_SetWindows(0,0,lcddev.width-1,lcddev.height-1);//Restore window to full screen       
<nowiki>}</nowiki>
}}


== <font color="blue">Chinese character modulo</font> ==
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
'''16x16 Chinese font modulo description'''
//32x32 Chinese font structure definition
:The size settings are as shown below:
typedef struct
:[[File:Module-014.jpg|750px]]
:The function is defined as follows:
{{code|1=
void GUI_DrawFont16(u16 x, u16 y, u16 fc, u16 bc, u8 *s,u8 mode)
{
{
  u8 i,j;
       unsigned char Index[2]; //Store Chinese character GBK code
  u16 k;
      char Msk[128]; //Store Chinese character modulo data
  u16 HZnum;
}typFNT_GB32; //Structure name can be defined by yourself
  u16 x0=x;
  HZnum=sizeof(tfont16)/sizeof(typFNT_GB16); //Automatic statistics of the number of Chinese characters
  for (k=0;k<HZnum;k++)
  {
       if((tfont16[k].Index[0]==*(s))&&(tfont16[k].Index[1]==*(s+1)))
      {
          LCD_SetWindows(x,y,x+16-1,y+16-1);
  for(i=0;i<16*2;i++)
          {
for(j=0;j<8;j++)
{
    if(!mode) //Non-overlay mode: The font has a background color, which will overwrite the original display
    {
  if(tfont16[k].Msk[i]&(0x80>>j))
                          {
                              Lcd_WriteData_16Bit(fc);
                          }  
                          else
                          {
                              Lcd_WriteData_16Bit(bc);
  }
    }
    else //Overlay mode: the font does not have a background color, and is directly superimposed and displayed on the original display content
    {
  POINT_COLOR=fc;
  if(tfont16[k].Msk[i]&(0x80>>j))
                          {
                              LCD_DrawPoint(x,y);//Draw a point 
  }
  x++;
  if((x-x0)==16)
  {
      x=x0;
      y++;
      break;
  }
    }
        }
    }
}  
continue; //Find the corresponding dot matrix font to exit immediately, to prevent the impact of multiple Chinese characters repeated modulo
    }
    LCD_SetWindows(0,0,lcddev.width-1,lcddev.height-1);//Restore window to full screen
}
}}


'''24x24 Chinese Chinese font modulo description'''
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
:The size settings are as shown below:
//48x48 Chinese font structure definition
:[[File:Module-015.jpg|750px]]
typedef struct
:The function is defined as follows:
{{code|1=
void GUI_DrawFont24(u16 x, u16 y, u16 fc, u16 bc, u8 *s,u8 mode)
{
{
    u8 i,j;
      unsigned char Index[2]; //Store Chinese character GBK code
    u16 k;
      char Msk[288]; //Store Chinese character modulo data
    u16 HZnum;
}typFNT_GB48; //Structure name can be defined by yourself
    u16 x0=x;
    HZnum=sizeof(tfont24)/sizeof(typFNT_GB24); //Automatic statistics of the number of Chinese characters
    for (k=0;k<HZnum;k++)
    {
        if((tfont24[k].Index[0]==*(s))&&(tfont24[k].Index[1]==*(s+1)))
        {
            LCD_SetWindows(x,y,x+24-1,y+24-1);
    for(i=0;i<24*3;i++)
    {
  for(j=0;j<8;j++)
  {
if(!mode) //Non-overlay mode: The font has a background color, which will overwrite the original display
{
                              if(tfont24[k].Msk[i]&(0x80>>j))
                              {
                                  Lcd_WriteData_16Bit(fc);
      }
                              else
                              {
                                  Lcd_WriteData_16Bit(bc);
      }
                        }
        else //Overlay mode: the font does not have a background color, and is directly superimposed and displayed on the original display content
        {
      POINT_COLOR=fc;
      if(tfont24[k].Msk[i]&(0x80>>j))
                              {
                                  LCD_DrawPoint(x,y);// Draw a point
      }
                              x++;
      if((x-x0)==24)
      {
  x=x0;
  y++;
  break;
      }
        }
  }
      }
}  
continue; //Find the corresponding dot matrix font to exit immediately, to prevent the impact of multiple Chinese characters repeated modulo
    }
    LCD_SetWindows(0,0,lcddev.width-1,lcddev.height-1);// Restore window to full screen
}
}}
}}


'''32x32 Chinese Chinese font modulo description'''
*'''The different sizes of Chinese modulo description'''
:The size settings are as shown below:
:*[http://www.lcdwiki.com/16x16_Chinese_font_modulo_description '''16x16 Chinese font modulo description''']
:[[File:Module-016.jpg|750px]]
:*[http://www.lcdwiki.com/24x24_Chinese_font_modulo_description '''24x24 Chinese font modulo description''']
:The function is defined as follows:
:*[http://www.lcdwiki.com/32x32_Chinese_font_modulo_description '''32x32 Chinese font modulo description''']
{{code|1=
:*[http://www.lcdwiki.com/48x48_Chinese_font_modulo_description '''48x48 Chinese font modulo description''']
void GUI_DrawFont32(u16 x, u16 y, u16 fc, u16 bc, u8 *s,u8 mode)
{
    u8 i,j;
    u16 k;
    u16 HZnum;
    u16 x0=x;
    HZnum=sizeof(tfont32)/sizeof(typFNT_GB32); //Automatic statistics of the number of Chinese characters
    for (k=0;k<HZnum;k++)
    {
if ((tfont32[k].Index[0]==*(s))&&(tfont32[k].Index[1]==*(s+1)))
{
              LCD_SetWindows(x,y,x+32-1,y+32-1);
      for(i=0;i<32*4;i++)
      {
    for(j=0;j<8;j++)
            {
  if(!mode) //Non-overlay mode: The font has a background color, which will overwrite the original display
  {
if(tfont32[k].Msk[i]&(0x80>>j))
                                {
      Lcd_WriteData_16Bit(fc);
                                }
else
                                {
                                      Lcd_WriteData_16Bit(bc);
}
                          }
  else //Overlay mode: the font does not have a background color, and is directly superimposed and displayed on the original display content
  {
POINT_COLOR=fc;
        if(tfont32[k].Msk[i]&(0x80>>j))
                                {
                                      LCD_DrawPoint(x,y);// Draw a point
}
                x++;
if((x-x0)==32)
{
      x=x0;
      y++;
      break;
}
  }
      }
}
  }  
  continue;  //Find the corresponding dot matrix font to exit immediately, to prevent the impact of multiple Chinese characters repeated modulo
    }
    LCD_SetWindows(0,0,lcddev.width-1,lcddev.height-1);// Restore window to full screen
}
}}


[[#top|BACK TO TOP]]
[[#top|BACK TO TOP]]

Latest revision as of 14:05, 12 June 2023

Molding software configuration

The font modulo software used in the test example is PCtoLCD2002. For detailed instructions on its use, see the following document:

PCtoLCD2002 Instructions for use

The PCtoLCD2002 software is specifically set as follows:

  • Font and size selection
Mode needs to select 字符模式
Fonts can be selected according to needs, such as selection 宋体
The word width and word height can be selected according to the needs. The font sizes commonly used in Chinese and English are as follows:
Chinese (word width x word height):16x16、24x24、32x32、48x48
English (character x word height):6x8、6x12、8x16、12x24、16x32、24x48(The corresponding font size needs to be set to respectively12x8、12x12、16x16、24x24、32x32、48x48)
Modify the dot matrix size can be set according to requirements, generally set to 0
  • Font option setting
There are many situations in the Chinese and English font option setting. Different settings and different code processing methods.
Here is an example of the following settings, the subsequent function code is written based on this setting.
Dot matrix format select 阴码
Modal mode select 逐行式
Molding trend select 顺向(高位在前)
Output number system select 十六进制数
Custom format select C51格式

Bottom support function

  • LCD_SetWindows
The function implementation differs depending on the driver IC (different drive ICs set coordinate values with different commands and principles),
but the principle is basically the same, setting the start and end coordinates and setting a display area.
Examples are as follows (ILI9341 as an example)
void LCD_SetWindows(u16 xStar, u16 yStar,u16 xEnd,u16 yEnd)
{	
	LCD_WR_REG(lcddev.setxcmd);	
	LCD_WR_DATA(xStar>>8);
	LCD_WR_DATA(0x00FF&xStar);		
	LCD_WR_DATA(xEnd>>8);
	LCD_WR_DATA(0x00FF&xEnd);

	LCD_WR_REG(lcddev.setycmd);	
	LCD_WR_DATA(yStar>>8);
	LCD_WR_DATA(0x00FF&yStar);		
	LCD_WR_DATA(yEnd>>8);
	LCD_WR_DATA(0x00FF&yEnd);

	LCD_WriteRAM_Prepare();	//Start writing to GRAM		
}
  • Lcd_WriteData_16Bit
This function is to set the pixel color value into GRAM, and then display it
Examples are as follows (ILI9341 as an example)
void Lcd_WriteData_16Bit(u16 Data)
{	
      LCD_CS_CLR;
      LCD_RS_SET;  
      SPI_WriteByte(SPI2,Data>>8);
      SPI_WriteByte(SPI2,Data);
      LCD_CS_SET;
}
  • LCD_DrawPoint
In fact, the LCD_SetWindows function and the Lcd_WriteData_16Bit function are used to display a pixel.
Examples are as follows (ILI9341 as an example)
void LCD_DrawPoint(u16 x,u16 y)
{
	LCD_SetCursor(x,y);//Set the cursor position
	Lcd_WriteData_16Bit(POINT_COLOR); 
}

English character modulo

1.Because in the program, the English characters that need to be displayed are searched according to the ASCII offset,
so the entire set of ASCII characters needs to be modeled.
2.If you do not need to use a character, you can set the modulo data of the character to {0},
as shown in the following example (take 6x8 size characters as an example)
const unsigned char asc2_0806[95][8]={
   ...  //This example is omitted, the actual application needs to be added
{0},/*"2",18*/ Do not use number 2
{0x00,0x00,0x78,0xB0,0x08,0x88,0x70,0x00},/*"3",19*/
{0x00,0x00,0x30,0x50,0x90,0x78,0x10,0x00},/*"4",20*/
{0},/*"5",21*/ Do not use number 5
{0x00,0x00,0x70,0x80,0xF8,0x88,0x70,0x00},/*"6",22*/
{0},/*"7",23*/ Do not use number 7
{0x00,0x00,0xF8,0x88,0x70,0x88,0x78,0x00},/*"8",24*/
{0},/*"9",25*/ Do not use number 9
   ...  //This example is omitted, the actual application needs to be added
}
3.The ASCII characters are as follows (the first space is also included):
ASCII characters: !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
4.The English modulo data fonts are all Default
  • The different sizes of English character modulo description


Chinese character modulo

1.When displaying Chinese characters, the modulo data is obtained by querying the GBK code that needs to display Chinese characters;
2.After the Chinese character is successfully modulo, the corresponding relationship between the Chinese character GBK code and the modulo data is saved through an array of structures.
3.The structure is defined as follows:
//16x16 Chinese font structure definition
typedef struct 
{
       unsigned char Index[2];	//Store Chinese character GBK code
       char Msk[32]; //Store Chinese character modulo data
}typFNT_GB16;  //Structure name can be defined by yourself

\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
//24x24 Chinese font structure definition
typedef struct 
{
       unsigned char Index[2];	//Store Chinese character GBK code
       char Msk[72]; //Store Chinese character modulo data
}typFNT_GB24;  //Structure name can be defined by yourself

\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
//32x32 Chinese font structure definition
typedef struct 
{
       unsigned char Index[2];	//Store Chinese character GBK code
       char Msk[128]; //Store Chinese character modulo data
}typFNT_GB32;  //Structure name can be defined by yourself

\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
//48x48 Chinese font structure definition
typedef struct 
{
       unsigned char Index[2];	//Store Chinese character GBK code
       char Msk[288]; //Store Chinese character modulo data
}typFNT_GB48; //Structure name can be defined by yourself
  • The different sizes of Chinese modulo description

BACK TO TOP