3.5inch LCD MODULE-Capacitive Touch: Difference between revisions

Latest revision as of 09:48, 15 September 2019

语言选择 Languages
➤中文
➤EN

Product Picture

Product Description

3.5-inch color screen, support 16BIT RGB 65K color display
320x480 resolution for clear display
With capacitive touch screen for 5-point touch
Support 8-bit/16-bit parallel data bus mode switching (16 bits by default)
Military-grade process standards, long-term stable work
Support punctual atom full range of development board inline, provide routines
Provide STM32/C51 source code, WIKI data online update
Provide underlying driver technical support

Product Parameters

Name	Parameter
Display Color	16BIT RGB 65K color
SKU	MRB3511
Screen Size	3.5(inch)
Screen Type	TFT
Driver IC	ILI9488
Resolution	320*480 (Pixel)
Module Interface	8Bit or 16Bit parallel interface
Active Area	48.96x73.44 (mm)
Touch Screen Type	Capacitive touch screen (maximum support for 5 touches)
Touch IC	GT911
Module PCB Size	56.41x97.60 (mm)
Operating Temperature	-10℃~60℃
Storage Temperature	-20℃~70℃
Operating Voltage	3.3V/5V
Power Consumption	TBD
Rough Weight	57g

Interface Definition


Picture1. Module Pin silk screen picture	Picture2. Module rear view

The module hardware supports 8-bit and 16-bit parallel port data bus mode switching (shown in red box in Picture 2), as follows:

Solder R16 with 0Ω resistor or short circuit directly, and disconnect R8: Select 16-bit parallel port data bus mode, use DB0~DB15 data pins(default)

Solder R8 with 0Ω resistor or short circuit directly, and disconnect R16: Select 8-bit parallel port data bus mode, use DB0~DB7 data pins

Number	Module Pin	Pin Description
1	CS	LCD reset control pin( low level enable)
2	RS	LCD register / data selection control pin(high level: register, low level: data)
3	WR	LCD write control pin
4	RD	LCD read control pin
5	RST	LCD reset control pin( low level reset)
6	DB0	LCD data bus low 8-bit pin
7	DB1
8	DB2
9	DB3
10	DB4
11	DB5
12	DB6
13	DB7
14	DB8	LCD data bus high 8-bit pin(When using the 8-bit parallel port data bus mode, the upper 8-bit pin is not used.)
15	DB9
16	DB10
17	DB11
18	DB12
19	DB13
20	DB14
21	DB15
22	GND	Module power ground pin
23	BL	LCD backlight control pin(High level light)
24	VDD	Module power positive pin (module has integrated voltage regulator IC, so the power supply can be connected to 5V or 3.3V)
25	VDD
26	GND	Module power ground pin
27	GND	Module power ground pin
28	NC	LCD backlight power positive pin (default shared onboard backlight power supply, this pin can not be connected)
29	NC	Not defined, no need to use
30	SDA	Capacitive touch screen IIC bus data pin
31	INT	Capacitive touch screen interrupt detection pin (low level when a touch occurs)
32	NC	Not defined, no need to use
33	CRST	Capacitive touch screen IC reset control pin (low level reset)
34	SCL	Capacitive touch screen IIC bus clock pin

How to use on STM32 development board

This module is compatible with the ALIENTEK STM32 development board. The specific usage is as follows:

Step 1: Download the test program

Download the STM32 test program from the Program Download column
For a description of the relevant test procedures, please refer to the test program documentation in the package

Step 2: Connect the STM32 development board

Find the TFTLCD Slot on the development board, connect the module pins and Slot(For example, the module CS pin corresponds to the slot CS pin),

and then plug them directly into the Slot

Step 3: Compile and download the program to the development board

Compile and download the program you need to test to the STM32 development board（ Don't know how to compile and download?）

Step 4: Observe the running of the program

After the program is finished, observe the running status of the program. If it can be displayed normally, the program runs successfully.

@@ Line 1: / Line 1: @@
 {{lan
       |
-cn=http://www.lcdwiki.com/zh/3.5inch_16BIT_Module_ILI9486_SKU:MRB3503
+cn=http://www.lcdwiki.com/zh/3.5inch_LCD_MODULE-Capacitive_Touch
       |
-en=http://www.lcdwiki.com/3.5inch_16BIT_Module_ILI9486_SKU:MRB3503
+en=http://www.lcdwiki.com/3.5inch_LCD_MODULE-Capacitive_Touch
 }}
-== <font color="blue">Product Video</font> ==
-{{#ev:youtube|ZaKXGjJTtDs}}
-*[http://www.lcdwiki.com/Video_Presentation Related Video]
 == <font color="blue">Product Picture</font> ==
-[[File:MRB3503-004.jpg|300px]] [[File:MRB3503-003.jpg|300px]] [[File:MRB3503-002.jpg|300px]]
+[[File:3.5-CTP-main-4.jpg|400px]][[File:3.5-CTP-2pin.jpg|400px]][[File:3.5-CTP-4pin-1.jpg|400px]][[File:3.5-CTP-4pin-4.jpg|400px]]
 ==<font color="blue">Product Description</font> ==
-* 3.5-inch color screen, support 16BIT RGB 65K color display, display rich colors
+* 3.5-inch color screen, support 16BIT RGB 65K color display
 * 320x480 resolution for clear display
-* 16-bit parallel bus transmission for fast transfer speed
+* With capacitive touch screen for 5-point touch
-* Supports ALIENTEK STM32 Mini, Elite, WarShip, Explorer, and Apollo development boards for direct plug-in use
+* Support 8-bit/16-bit parallel data bus mode switching (16 bits by default)
-* Support for touch function
-* Support SD card function expansion
-* Provides a rich sample program for STM32 and C51 platforms
 * Military-grade process standards, long-term stable work
+* Support punctual atom full range of development board inline, provide routines
+* Provide STM32/C51 source code, WIKI data online update
 * Provide underlying driver technical support
@@ Line 35: / Line 29: @@
 |-
 | align="center" |SKU
-| align="center" |MRB3503
+| align="center" |MRB3511
 |-
 | align="center" |Screen Size
@@ Line 44: / Line 38: @@
 |-
 | align="center" |Driver IC
-| align="center" |ILI9486
+| align="center" |ILI9488
 |-
 | align="center" |Resolution
-| align="center" |480*320 (Pixel)
+| align="center" |320*480 (Pixel)
 |-
 | align="center" |Module Interface
-| align="center" |16Bit parallel interface
+| align="center" |8Bit or 16Bit parallel interface
 |-
 | align="center" |Active Area
@@ Line 56: / Line 50: @@
 |-
 | align="center" |Touch Screen Type
-| align="center" |Resistive touch screen
+| align="center" |Capacitive touch screen (maximum support for 5 touches)
 |-
 | align="center" |Touch IC
-| align="center" |XPT2046
+| align="center" |GT911
 |-
 | align="center" |Module PCB Size
-| align="center" |56.34x98.25 (mm)
+| align="center" |56.41x97.60 (mm)
 |-
 | align="center" |Operating Temperature
-| align="center" | -20℃~60℃
+| align="center" | -10℃~60℃
 |-
 | align="center" |Storage Temperature
-| align="center" | -30℃~70℃
+| align="center" | -20℃~70℃
 |-
 | align="center" |Operating Voltage
@@ Line 76: / Line 70: @@
 | align="center" |TBD
 |-
-| align="center" |Rough Weight(Package containing)
+| align="center" |Rough Weight
-| align="center" |No touch: 47 (g) / With touch: 58 (g)
+| align="center" |57g
 |}
 ==<font color="blue">Interface Definition</font> ==
-[[File:MRB3503-005.jpg|550px]]
+{| class="FCK__ShowTableBorders" align="left"
+|-
+![[file:3.5-CTP-21.jpg|500px]]
+![[file:3.5-CTP-20.jpg|500px]]
+|-
+| align="center" | '''Picture1. Module Pin silk screen picture'''
+| align="center" | '''Picture2. Module rear view'''
+|}
+<br clear="all">
-'''This module hardware only supports 16-bit parallel bus transmission'''
+The module hardware supports 8-bit and 16-bit parallel port data bus mode switching (shown in red box in Picture 2), as follows:
+:Solder '''R16''' with 0Ω resistor or short circuit directly, and disconnect '''R8''': Select '''16-bit''' parallel port data bus mode, use '''DB0~DB15''' data pins'''(default)'''
+:Solder '''R8''' with 0Ω resistor or short circuit directly, and disconnect '''R16''': Select '''8-bit''' parallel port data bus mode, use '''DB0~DB7''' data pins
 {| class="wikitable" border="1" style="width: 550px; background-color: white;"
 | align="center" |Number
-| align="center" |Pin Label
+| align="center" |Module Pin
-| align="center" |Description
+| align="center" |Pin Description
 |-
 | align="center" |1
@@ Line 138: / Line 143: @@
 | align="center" |14
 | align="center" |DB8
-| rowspan="8" |LCD data bus high 8-bit pin
+| rowspan="8" |LCD data bus high 8-bit pin(When using the 8-bit parallel port data bus mode, the upper 8-bit pin is not used.)
 |-
 | align="center" |15
@@ Line 162: / Line 167: @@
 |-
 | align="center" |22
-| align="center" |SDCS
+| align="center" |GND
-|SD card selection control pin (used when using the SD card expansion function, this test program is not used)
+|Module power ground pin
 |-
 | align="center" |23
@@ Line 184: / Line 189: @@
 |-
 | align="center" |28
-| align="center" |5V
+| align="center" |NC
 |LCD backlight power positive pin (default shared onboard backlight power supply, this pin can not be connected)
 |-
 | align="center" |29
-| align="center" |MISO
+| align="center" |NC
-|Touch screen SPI bus data input pin
+|Not defined, no need to use
 |-
 | align="center" |30
-| align="center" |MOSI
+| align="center" |SDA
-|Touch screen SPI bus data output pin
+|Capacitive touch screen IIC bus data pin
 |-
 | align="center" |31
-| align="center" |PEN
+| align="center" |INT
-|Touch screen interrupt detection pin(Low level when a touch occurs)
+|Capacitive touch screen interrupt detection pin (low level when a touch occurs)
 |-
 | align="center" |32
-| align="center" |F_CS
+| align="center" |NC
-|Flash chip select control pin (used when using the Flash extension function, this test program is not used)
+|Not defined, no need to use
 |-
 | align="center" |33
-| align="center" |T_CS
+| align="center" |CRST
-|Touch screen IC chip select control pin(Low level enable)
+|Capacitive touch screen IC reset control pin (low level reset)
 |-
 | align="center" |34
-| align="center" |CLK
+| align="center" |SCL
-|Touch screen SPI bus clock control pin
+|Capacitive touch screen IIC bus clock pin
 |-
 |}
@@ Line 225: / Line 230: @@
 # Find the TFTLCD Slot on the development board, connect the module pins and Slot(For example, the module CS pin corresponds to the slot CS pin),
 ::and then plug them directly into the Slot
@@ Line 237: / Line 243: @@
 ==<font color="blue">Program Download</font> ==
-* [http://www.lcdwiki.com/res/Program/Parallel_Port/3.5inch/16BIT_ILI9486_MRB3503_V1.0/3.5inch_16BIT_Module_ILI9486_MRB3503_V1.0.zip '''3.5inch 16bit Parallel-Port Module package''']
+* [http://www.lcdwiki.com/res/Program/Parallel_Port/3.5inch/8_16BIT_ILI9488_MRB3511_V1.0/3.5inch_8%2616BIT_Module_ILI9488_MRB3511_V1.0.zip '''3.5inch 8&16bit Parallel-Port Capacitive Module package''']
 ==<font color="blue">Product Documentation</font> ==
-* [http://www.lcdwiki.com/res/MRB3503/3.5inch_16BIT_Module_MRB3503_User_Manual_EN.pdf '''3.5inch 16bit Parallel-Port Module User Manual''']
+* [http://www.lcdwiki.com/res/MRB3511/3.5inch_8&16BIT_Module_MRB3511_User_Manual_EN.pdf '''3.5inch 8&16bit Parallel-Port Capacitive Module User Manual''']
-* [http://www.lcdwiki.com/res/MRB3503/QD-TFT3501_specification_v1.1.pdf '''3.5inch TFTLCD Specification''']
+* [http://www.lcdwiki.com/res/MRB3511/QD354801_Specification.pdf '''3.5inch TFT LCD Specification''']
-* [http://www.lcdwiki.com/res/MRB3503/3.5inch_MRB3503_Size.pdf '''3.5inch 16bit Parallel-Port Module Size Picture''']
+* [http://www.lcdwiki.com/res/MRB3511/3.5寸电容触摸结构工程图.pdf '''3.5inch Capacitive Touch structure engineering drawing''']
-* [http://www.lcdwiki.com/res/MRB3503/3.5inch_MRB3503_Schematic_V1.0.pdf '''3.5inch 16bit Parallel-Port Module Schematic''']
+* [http://www.lcdwiki.com/zh/images/e/e3/3.5inch_MRB3511_Size.png '''3.5inch 8&16bit Parallel-Port Capacitive Module Size''']
-* [http://www.lcdwiki.com/res/MRB3503/Altium_Package_library.zip '''3.5inch 16bit Parallel-Port Module LCD Schematic and PCB Package Library''']
+* [http://www.lcdwiki.com/res/MRB3511/3.5inch_MRB3511_schematic.pdf '''3.5inch 8&16bit Parallel-Port Capacitive Module Schematic''']
-* [http://www.lcdwiki.com/res/MRB3503/ILI9486_Datasheet.pdf '''Driver IC ILI9486 Data sheet''']
+* [http://www.lcdwiki.com/res/MRB3511/Altium_Package_library.zip '''3.5inch 8&16bit Parallel-Port Capacitive Module LCD Schematic and PCB Package Library''']
+* [http://www.lcdwiki.com/res/MRB3511/ILI9488%20Data%20Sheet.pdf '''Driver IC ILI9488 Data sheet''']
 ==<font color="blue">Reference Materials</font> ==

Latest revision as of 09:48, 15 September 2019

Product Picture

Product Description

Product Parameters

Interface Definition

How to use on STM32 development board

Program Download

Product Documentation

Reference Materials

Common Software