More actions
| (One intermediate revision by the same user not shown) | |||
| Line 126: | Line 126: | ||
==<font color="blue">Program Download</font> == | ==<font color="blue">Program Download</font> == | ||
* [http://www.lcdwiki.com/res/Program/Common_SPI/1. | * [http://www.lcdwiki.com/res/Program/Common_SPI/1.6inch/SPI_SSD1283A_MSP1601_V1.0/1.6inch_Module_SSD1283A_MSP1601_SPI_V1.0.zip '''1.6 inch SPI Module Package'''] | ||
==<font color="blue">Reference Materials</font> == | ==<font color="blue">Reference Materials</font> == | ||
| Line 141: | Line 141: | ||
* Example of connecting to the ArduinoD1 Mini application: | * Example of connecting to the ArduinoD1 Mini application: | ||
'''[[【Application】1. | '''[[【Application】1.6inch SPI Module MSP1601 with D1 mini]]''' | ||
==<font color="blue">Common Software</font> == | ==<font color="blue">Common Software</font> == | ||
Latest revision as of 09:55, 11 November 2019
Product Picture
Product Description
- 1.6-inch color screen,support 65K color display,display rich colors
- Semi-permeable trans-LCD, has superior performance and is clearly visible in strong light
- Using the SPI serial bus, it only takes a few IOs to illuminate the display
- On-board 3.3V/5V power conversion chip compatible with 3.3V and 5V voltage levels
- The working temperature range is industrial grade (- 20 ℃ ~ 70 ℃)
- Military-grade process standards, long-term stable work
- Provide a rich sample program
- Provide underlying driver technical support
- Support backlight control
Product Parameters
| Name | Parameter |
| Display Color | RGB 65K color |
| SKU | MSP1601 |
| Screen Size | 1.6(inch) |
| Type | TFT |
| Driver IC | SSD1283A |
| Resolution | 130*130 (Pixel) |
| Module Interface | 4-wire SPI interface |
| Active Area (AA area) | 28.86x28.86(mm) |
| Module PCB Size | 35.40X53.82X1.6(mm) |
| Angle of view | >60° |
| Operating Temperature | -10℃~60℃ |
| Storage Temperature | -20℃~70℃ |
| VCC power voltage | 3.3V/5V |
| Power Consumption | TBD |
| Rough Weight(Package containing) | 15(g) |
Interface Definition
| Number | Pin Label | Description |
| 1 | VCC | 5V/3.3V power input |
| 2 | GND | Ground |
| 3 | CS | LCD chip select signal, low level enable |
| 4 | RST | LCD reset signal, low level reset |
| 5 | A0 | LCD register / data selection signal,
high level: register, low level: data |
| 6 | SDA | SPI bus write data signal |
| 7 | SCK | SPI bus clock signal |
| 8 | LED | Backlight control, high level lighting,
if not controlled, connect 3.3V always bright |
Product Documentation
- 1.6 inch SPI Module User Manual
- 1.6 inch TFT LCD Specifications
- 1.6 inch SPI Module Size Picture
- 1.6 inch SPI Module Schematic
- 1.6 inch H016IT01 TFT LCD Schematic and PCB Package Library
- Driver IC SSD1283A Data sheet
Program Download
Reference Materials
- Arduino IDE software use illustration
- C51 Keil and stc-isp software use illustration
- STM32 keil software use illustration
- PCtoLCD2002 software use illustration
- Image2Lcd software use illustration
- Chinese and English display modulo settings
Applications
- Example of connecting to the ArduinoD1 Mini application:
【Application】1.6inch SPI Module MSP1601 with D1 mini