Toggle search
Toggle menu
14
832
7
5,037
LCD wiki
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

7inch HDMI Display (H): Difference between revisions

From LCD wiki
More actions
← Older edit
VisualWikitext
Lin (talk | contribs)
2,027 edits
Liang (talk | contribs)
2,155 edits
 
(8 intermediate revisions by 2 users not shown)
Line 88: Line 88:
|-
|-
|① HDMI Interface
|① HDMI Interface
|Input HDMI signal, using HDMI cable connection, commonly used to connect to the computer，The maximum supported resolution is 1080P
|Input HDMI signal, using HDMI cable connection, commonly used to connect to the computer，The maximum supported resolution is 1920x1080
|-
|-
|② Touch Interface
|② Touch Interface
Line 118: Line 118:
==<font color="blue"> Working with Raspberry Pi </font> ==
==<font color="blue"> Working with Raspberry Pi </font> ==
'''Step 1. Download the Official image'''
'''Step 1. Download the Official image'''
:1) Download '''Raspbian''' Official Image
:1) Download '''Raspbian''' Official Image
::Download URL: '''https://www.raspberrypi.org/downloads/raspbian/'''
::Download URL: '''https://www.raspberrypi.org/downloads/raspbian/'''
Line 132: Line 133:


'''Step 2. Brun Official Image'''  
'''Step 2. Brun Official Image'''  
:1) Download and install tool software（If they are already installed,this step can be ignored）
:1) Download and install tool software（If they are already installed,this step can be ignored）
::SD card format software '''SDCard Formatter''' download URL :  
::SD card format software '''SDCard Formatter''' download URL :  
Line 146: Line 148:


'''Step 3. Modify the “config.txt” configuration file'''  
'''Step 3. Modify the “config.txt” configuration file'''  
:Open the “config.txt” file in the root directory of SD card on the computer, Add the following at the end of the file, save and exit.
:Open the “config.txt” file in the root directory of SD card on the computer, Add the following at the end of the file, save and exit.
{{code|1=
{{code|1=
Line 160: Line 163:


'''Step 4. Insert SD card'''
'''Step 4. Insert SD card'''
:After the above steps are completed, pop up the SD card on the computer and insert it into the SD card slot on the back of the raspberry pie.
:After the above steps are completed, pop up the SD card on the computer and insert it into the SD card slot on the back of the raspberry pie.


'''Step 5. Running system'''     
'''Step 5. Running system'''     
:Connect the HDMI interface and touch interface of the display screen to raspberry pie, connect the power supply of raspberry pie,  
:Connect the HDMI interface and touch interface of the display screen to raspberry pie, connect the power supply of raspberry pie,  
:and start the machine to display and touch normally..
:and start the machine to display and touch normally..
Line 200: Line 205:
|-
|-
| rowspan="2" |Raspbian
| rowspan="2" |Raspbian
| rowspan="2" |2020-05-27
| rowspan="2" |2020-12-02
-raspios
| rowspan="2" |PI4/PI3B+/PI3/
| rowspan="2" |PI4/PI3B+/PI3/
PI2/ZERO/ZERO W
PI2/ZERO/ZERO W
Line 207: Line 211:
password:raspberry
password:raspberry
|[[File:Baiduyun.jpg|24px]]BaiduYun:
|[[File:Baiduyun.jpg|24px]]BaiduYun:
|[https://pan.baidu.com/s/1iOSVyoKOvS2dROZtwq6ktg MPI7008-7inch-H-2020-05-27-raspios-buster.7z] Fetch Code：6fun  
|[https://pan.baidu.com/s/1iOSVyoKOvS2dROZtwq6ktg 7-H-S-MPI7006-MPI7008-2020-12-02-raspios-buster-armhf.7z] Fetch Code：6fun  
|-
|-
|[[File:Mega-1.jpg|24px]]Mega:  
|[[File:Mega-1.jpg|24px]]Mega:  
|[https://mega.nz/folder/2DxGzISQ#pNQm03-8fG3E3MpYQ_5qBQ MPI7008-7inch-H-2020-05-27-raspios-buster.7z]
|[https://mega.nz/folder/2DxGzISQ#pNQm03-8fG3E3MpYQ_5qBQ 7-H-S-MPI7006-MPI7008-2020-12-02-raspios-buster-armhf.7z]
|-
|-
| rowspan="2" |Ubuntu MATE
| rowspan="2" |Ubuntu MATE-32bit
| rowspan="2" |16.02
| rowspan="2" |20.10
| rowspan="2" |PI3,PI2
| rowspan="2" |PI4,PI3,PI2
| rowspan="2" |user:pi
| rowspan="2" |user:pi
password:raspberry
password:raspberry
|[[File:Baiduyun.jpg|24px]]BaiduYun:
|[[File:Baiduyun.jpg|24px]]BaiduYun:
|[https://pan.baidu.com/s/1AaJaVNli7RHl5MK2o_V7nw MPI7008-7inch-H-1024x600-Pi2-Pi3-ubuntu-mate-16.04-beta2.7z]Fetch Code：ukin
|[https://pan.baidu.com/s/1J3lYp0QXzKVmPB2qlk8vtw  MPI7006-MPI7008-7inch-H-S-ubuntu-mate-20.10-desktop-armhf+raspi7z]Fetch Code：159d
|-
|-
|[[File:Mega-1.jpg|24px]]Mega:
|[[File:Mega-1.jpg|24px]]Mega:
|[https://mega.nz/#!fHJ2XYhR!_dPPyIkmYpaTnpj3NxowDSKZej8vjRqx8Hj_WuC8_9A MPI7008-7inch-H-1024x600-Pi2-Pi3-ubuntu-mate-16.04-beta2.7z]
|[https://mega.nz/folder/OB8GgLwY#bjKtZu6w_iyL1LMN1JgZVw MPI7006-MPI7008-7inch-H-S-ubuntu-mate-20.10-desktop-armhf+raspi]
|-
|-
| rowspan="2" |Kali Linux RaspberryPi 2, 3 and 4
| rowspan="2" |Kali Linux RaspberryPi 2, 3 and 4
| rowspan="2" |2020.2b
| rowspan="2" |2020.4
| rowspan="2" |PI4B,PI3B+,PI3,PI2
| rowspan="2" |PI4B,PI3B+,PI3,PI2
| rowspan="2" |user: kali
| rowspan="2" |user: kali
password: kali
password: kali
|[[File:Baiduyun.jpg|24px]]BaiduYun:
|[[File:Baiduyun.jpg|24px]]BaiduYun:
|[https://pan.baidu.com/s/1TPcUqPUaJUK-Oo-b2HdvqQ MPI7008-7inch-H-1024x600-kali-linux-2020.2b] Fetch Code：y3t5  
|[https://pan.baidu.com/s/1TPcUqPUaJUK-Oo-b2HdvqQ   MPI7008-MPI7006-7inch-S-H-kali-linux-2020.4-rpi4-nexmon.7z] Fetch Code：y3t5  
|-
|[[File:Mega-1.jpg|24px]]Mega:
|[https://mega.nz/folder/mYMgiR6R#oBmzb1HvY5IpnK-f4YWtiA MPI7008-MPI7006-7inch-S-H-kali-linux-2020.4-rpi4-nexmon.7z]
|-
| rowspan="2" |retropie-buster-rpi4
| rowspan="2" |4.6
| rowspan="2" |PI4B
| rowspan="2" |user:pi
password:raspberry
|[[File:Baiduyun.jpg|24px]]BaiduYun:
|[https://pan.baidu.com/s/1cfoskUr_nqXlyqPH68dj_w MPI7006-7inch-H-1024x600-retropie-buster-4.6-rpi4] Fetch Code：lxch
|-
|[[File:Mega-1.jpg|24px]]Mega:
|[https://mega.nz/folder/ylgHAQCb#RZmS28YTzgCHJyMHFBUEww MPI7006-7inch-H-1024x600-retropie-buster-4.6-rpi4]
|-
| rowspan="2" |retropie-buster-rpi2_rpi3
| rowspan="2" |4.6
| rowspan="2" |PI3B+,PI3,PI2
| rowspan="2" |user:pi
password:raspberry
|[[File:Baiduyun.jpg|24px]]BaiduYun:
|[https://pan.baidu.com/s/1zrvef8uKwF2IfVjpcMpzkQ MPI7006-7inch-H-1024x600-retropie-buster-4.6-rpi2_rpi3] Fetch Code：ti7w
|-
|[[File:Mega-1.jpg|24px]]Mega:
|[https://mega.nz/folder/mlwFVKDC#AJe0OLpeRX6qUSbTOy_p2A MPI7006-7inch-H-1024x600-retropie-buster-4.6-rpi2_rpi3]
|-
| rowspan="2" |retropie-buster-rpi1_zero
| rowspan="2" |4.6
| rowspan="2" |PI1,PI ZERO/ZERO W
| rowspan="2" |user:pi
password:raspberry
|[[File:Baiduyun.jpg|24px]]BaiduYun:
|[https://pan.baidu.com/s/1EM9jJ6_lp9uhQllgJaSZcA MPI7006-7inch-H-1024x600-retropie-buster-4.6-rpi1_zero] Fetch Code：l09u
|-
|-
|[[File:Mega-1.jpg|24px]]Mega:
|[[File:Mega-1.jpg|24px]]Mega:
|[https://mega.nz/folder/fS4TXIrY#qgivLSYkPBvQE59TvkSLOg MPI7008-7inch-H-1024x600-kali-linux-2020.2b]
|[https://mega.nz/folder/z44FUApA#P_tFhydd9ExRa4pAkcy_AA MPI7006-7inch-H-1024x600-retropie-buster-4.6-rpi1_zero]
|}  
|}  


Latest revision as of 10:55, 12 December 2020

语言选择

Languages

➤中文
➤EN


Product Pictures

Product Feature

  • IPS full Angle display
  1. The viewing Angle is large
  2. true color
  3. Dynamic picture quality is excellent
  4. Energy saving and environmental protection
  • 1024X600 hd vision
  1. Resolution for hd 1024X600 dot matrix
  2. It is more delicate than 800X480 ordinary screen
  • Tempered glass touch panel
  1. Hardness up to 6H, more durable and more scratch resistant
  • External audio output interface
  1. Built - in power amplifier circuit
  2. 3.5mm external audio interface
  • Used as a mini PC monitor
  1. Support raspberry pie, Banana Pi, BB Black and other mainstream development board
  2. Support Raspbian, Kali Linux, ubuntu and other mainstream systems, single touch plug and play without driver.
  • Used as a computer display
  1. Support win10/win8/win7 system, support five-point touch plug and play driver

Product Description

  • Product Parameters
SKU MPI7006
Screen Type IPS screen
Screen Size 7.0 inch
Resolution 1024 x 600
backlight adjustment Independent button to adjust
Touch Screen Type Capacitive Touch Screen
Touch IC GT911
Power MicroUSB（5V/2A）
Video Input Interface HDMI
Audio Output Interface 3.5mm Audio Interface
Module Size (L x W x H) 164.90 × 102.00 × (14.25±0.2)mm
Product weight (including package) 510g
  • Key and Interface Function Description

KEY and Interface DESCRIPTION
① HDMI Interface Input HDMI signal, using HDMI cable connection, commonly used to connect to the computer，The maximum supported resolution is 1920x1080
② Touch Interface Transfer touch signal, connect with micro USB cable, provide touch and power supply function, commonly used to connect computer
③ Power Interface Connect to the power supply and use micro USB cable to connect. Only power supply function is provided
④ Touch Interface Transmit touch signal, connect with micro USB cable, provide touch and power supply function, commonly used to connect Raspberry Pi
⑤ 3.5mm Audio Interface Output audio signal, connect audio output device, such as headphones
⑥ Backlight Adjustment Button Adjust the backlight brightness of the display screen. With each click, the backlight brightness increases by 10, the maximum increases to 100, and then starts from 0，Press and hold for 3 seconds to turn off the backlight
⑦ Cooling Fan Interface Connect cooling fan
⑧ HDMI Interface Input HDMI signal, connect with HDMI adapter, only used to connect to the Raspberry Pi，The maximum supported resolution is 1024x600
  • Product Size

Working with Raspberry Pi

Step 1. Download the Official image

1) Download Raspbian Official Image
Download URL: https://www.raspberrypi.org/downloads/raspbian/
Username: pi Password: raspberry
2) Download Ubuntu Mate Official Image
Download URL: https://ubuntu-mate.org/download/
The user name and password can be set by yourself after startup
3) Download Kail Official Image
Download URL: https://www.offensive-security.com/kali-linux-arm-images/
Username: kali (The old version is root) Password: kali(The old version is toor)
4) Download Retropie Official Image
Download URL: https://retropie.org.uk/download/
Username: pi Password: raspberry

Step 2. Brun Official Image

1) Download and install tool software（If they are already installed,this step can be ignored）
SD card format software SDCard Formatter download URL :
https://www.sdcard.org/downloads/formatter_4/
Image burning software win32diskimager download URL:
https://sourceforge.net/projects/win32diskimager/
2) Format SD card
Insert the SD card into the card reader -> Insert the card reader into the computer -> Open the SDFormatter software -> Select SD card ->
Select quick format (generally select quick format, other options can be selected according to your own needs) -> Click the Format button ->
Select "Yes" -> Click OK after formatting.
3) Brun Image
Open the win32diskimager software -> Select the image file to be burned (xxx.img ) -> Select SD card -> Click the "write" button ->
Select "Yes" -> Wait for the burning to complete (the whole process lasts about 10 minutes)

Step 3. Modify the “config.txt” configuration file

Open the “config.txt” file in the root directory of SD card on the computer, Add the following at the end of the file, save and exit.
hdmi_force_edid_audio=1
max_usb_current=1
hdmi_force_hotplug=1
config_hdmi_boost=7
hdmi_group=2
hdmi_mode=87
hdmi_drive=2
display_rotate=0                             
hdmi_cvt 1024 600 60 6 0 0 0

Step 4. Insert SD card

After the above steps are completed, pop up the SD card on the computer and insert it into the SD card slot on the back of the raspberry pie.

Step 5. Running system

Connect the HDMI interface and touch interface of the display screen to raspberry pie, connect the power supply of raspberry pie,
and start the machine to display and touch normally..

Work as HDMI touch monitor

This product can be used as the HDMI touch monitor of Windows computer, only need to connect HDMI interface and TOUCH interface, can normally display and support up to five points touch.

Resource

  • Document
  1. 7inch-HDMI-Display-(H)-Quick-Start.pdf
  2. 7inch-HDMI-Display-(H)-User-Manual.pdf
  3. How_to_install_the_LCD_driver_V1.2
  4. How_to_install_matchbox-keyboard
  5. How_to_use_Raspberry_Pi(Download,Format,Burn,SSH,PuTTy)-V1.0.pdf
  • Driver download
  1. Local download: LCD-show.tar.gz
  • Images Download
If you have difficulty installing the driver, or if you still can't use the display properly after installing the driver,
Please Try our Configned images for tested.
Just need download and write the image into the TF card. DO NOT need any driver installation steps.
Image Name Version Support Default Password Download
Raspbian 2020-12-02 PI4/PI3B+/PI3/

PI2/ZERO/ZERO W

user:pi

password:raspberry

BaiduYun: 7-H-S-MPI7006-MPI7008-2020-12-02-raspios-buster-armhf.7z Fetch Code：6fun
Mega: 7-H-S-MPI7006-MPI7008-2020-12-02-raspios-buster-armhf.7z
Ubuntu MATE-32bit 20.10 PI4,PI3,PI2 user:pi

password:raspberry

BaiduYun: MPI7006-MPI7008-7inch-H-S-ubuntu-mate-20.10-desktop-armhf+raspi7zFetch Code：159d
Mega: MPI7006-MPI7008-7inch-H-S-ubuntu-mate-20.10-desktop-armhf+raspi
Kali Linux RaspberryPi 2, 3 and 4 2020.4 PI4B,PI3B+,PI3,PI2 user: kali

password: kali

BaiduYun: MPI7008-MPI7006-7inch-S-H-kali-linux-2020.4-rpi4-nexmon.7z Fetch Code：y3t5
Mega: MPI7008-MPI7006-7inch-S-H-kali-linux-2020.4-rpi4-nexmon.7z
retropie-buster-rpi4 4.6 PI4B user:pi

password:raspberry

BaiduYun: MPI7006-7inch-H-1024x600-retropie-buster-4.6-rpi4 Fetch Code：lxch
Mega: MPI7006-7inch-H-1024x600-retropie-buster-4.6-rpi4
retropie-buster-rpi2_rpi3 4.6 PI3B+,PI3,PI2 user:pi

password:raspberry

BaiduYun: MPI7006-7inch-H-1024x600-retropie-buster-4.6-rpi2_rpi3 Fetch Code：ti7w
Mega: MPI7006-7inch-H-1024x600-retropie-buster-4.6-rpi2_rpi3
retropie-buster-rpi1_zero 4.6 PI1,PI ZERO/ZERO W user:pi

password:raspberry

BaiduYun: MPI7006-7inch-H-1024x600-retropie-buster-4.6-rpi1_zero Fetch Code：l09u
Mega: MPI7006-7inch-H-1024x600-retropie-buster-4.6-rpi1_zero
  • Software
  1. Panasonic SDFormatter
  2. Win32DiskImager
  3. PuTTY

BACK TO TOP

Retrieved from "http://www.lcdwiki.com/index.php?title=7inch_HDMI_Display_(H)&oldid=3667"
Contents
Last modified
This page was last edited on 12 December 2020, at 10:55.