Toggle search
Toggle menu
14
832
7
5,078
LCD wiki
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

3.5inch RPi Display: Difference between revisions

From LCD wiki
More actions
← Older edit
VisualWikitext
Liang (talk | contribs)
2,156 edits
Fang (talk | contribs)
53 edits
No edit summary
 
(13 intermediate revisions by 2 users not shown)
Line 137: Line 137:
This LCD Module need install driver first.
This LCD Module need install driver first.
===Step 1：Download the Raspbian IMG===
===Step 1：Download the Raspbian IMG===
https://www.raspberrypi.org/downloads/raspbian/
https://www.raspberrypi.com/software/operating-systems/
 
===Step 2: Burn the system image===
===Step 2: Burn the system image===
If you don't know how to do that,you can refer to the [https://www.raspberrypi.org/documentation/installation/installing-images/README.md Raspberry Pi office tutorial]
If you don't know how to do that,you can refer to the [https://www.raspberrypi.org/documentation/installation/installing-images/README.md Raspberry Pi office tutorial]
Line 173: Line 174:
*Save the touch parameters (may differ depending on LCD) to 99-calibration.conf, as shown in the picture:
*Save the touch parameters (may differ depending on LCD) to 99-calibration.conf, as shown in the picture:


{{rotate}}
== <font color="blue">How to rotate the display direction</font>  ==
*'''Step 1'''，If the driver is not installed, execute the following command (Raspberry Pi needs to connected to the Internet):
{{code|
sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD35-show  }}
After execution, the driver will be installed.  <br/>
 
*'''Step 2'''，If the driver is already installed, execute the following command:
{{code|
cd LCD-show/
sudo ./rotate.sh 90}}
After execution, the system will automatically restart, and the display screen will rotate 90 degrees to display and touch normally.  <br/>
（ ' <font color="blue">90</font> ' can be changed to 0, 90, 180 and 270, respectively representing rotation angles of 0 degrees, 90 degrees, 180 degrees, 270 degrees）  <br/>
<font color="red">If the '''rotate.sh''' prompt cannot be found, use '''Step 1''' to install the latest drivers</font>


==<font color="blue"> Download Resources</font>==
==<font color="blue"> Download Resources</font>==
Line 204: Line 221:
|-
|-
| rowspan="2" |Raspbian
| rowspan="2" |Raspbian
| rowspan="2" |2022-04-04
| rowspan="2" |2024-11-19
| rowspan="2" |PI4/PI3B+/PI3/
| rowspan="2" |PI5/PI4/PI3B+/PI3/
PI2/PI1/ZERO/ZERO W
PI2/PI1/ZERO/ZERO W
| rowspan="2" |user:pi
| rowspan="2" |user:pi
password:raspberry
password:raspberry
|[[File:Baiduyun.jpg|24px]]BaiduYun:
|[[File:Baiduyun.jpg|24px]]BaiduYun:
|[https://pan.baidu.com/s/1U1NLaFAUUPnN-WoK0It05w MPI3501-3.5inch-2022-04-04-raspios-bullseye-armhf.7z] 提取码：n5zl
|[https://pan.baidu.com/s/1U1NLaFAUUPnN-WoK0It05w MPI3501-3.5inch-2024-11-19-raspios-bookworm-armhf(support Pi4/5)] 提取码：n5zl
|-
|-
|[[File:Mega-1.jpg|24px]]Mega:
|[[File:Mega-1.jpg|24px]]Mega:
|[https://mega.nz/folder/ixQiTa7R#EM2uFGwMC8QSU6D4untoGA MPI3501-3.5inch-2021-03-04-raspios-buster-armhf.7z]
|[https://mega.nz/folder/ixQiTa7R#EM2uFGwMC8QSU6D4untoGA MPI3501-3.5inch-2022-04-04-raspios-bullseye-armhf.7z]
|-
|-
| rowspan="2" |Ubuntu-MATE-32bit
| rowspan="2" |Ubuntu-MATE-32bit
Line 224: Line 241:
|-
|-
|[[File:Mega-1.jpg|24px]]Mega:
|[[File:Mega-1.jpg|24px]]Mega:
|[https://mega.nz/folder/mhw2DCqK#qFiavXCAXOXMqOGjLXrtaw MPI3501-3.5inch-ubuntu-mate-20.10-desktop-armhf+raspi.7z]
|[https://mega.nz/folder/mhw2DCqK#qFiavXCAXOXMqOGjLXrtaw MPI3501-3.5inch-ubuntu-mate-22.04-desktop-armhf+raspi.7z]
|-
|-
| rowspan="2" |Kali Linux RaspberryPi-32bit
| rowspan="2" |Kali Linux RaspberryPi-32bit
| rowspan="2" |2022.1
| rowspan="2" |2024.3
| rowspan="2" |PI4B,PI3B+,PI3,PI2
| rowspan="2" |PI4B,PI3B+,PI3,PI2
| rowspan="2" |user: kali
| rowspan="2" |user: kali
password: kali
password: kali
|[[File:Baiduyun.jpg|24px]]BaiduYun:
|[[File:Baiduyun.jpg|24px]]BaiduYun:
|[https://pan.baidu.com/s/13iNh1y0GNYRaZREuMgTXGQ MPI3501-3.5inch-kali-linux-2022.1] 提取码：vqt3  
|[https://pan.baidu.com/s/13iNh1y0GNYRaZREuMgTXGQ MPI3501-3.5inch-kali-linux-2024.3] 提取码：vqt3  
|-
|-
|[[File:Mega-1.jpg|24px]]Mega:
|[[File:Mega-1.jpg|24px]]Mega:
|[https://mega.nz/folder/nlghUbSK#ZHPxHJCAi8gdoRG0uwC2og MPI3501-3.5inch-kali-linux-2021.2]
|[https://mega.nz/folder/nlghUbSK#ZHPxHJCAi8gdoRG0uwC2og MPI3501-3.5inch-kali-linux-2022.1]
|}
|}


Latest revision as of 17:40, 26 November 2024

语言选择

Languages

➤中文
➤EN


Product Video

Load video
YouTube

Product Pictures

Features

  • 320×480 resolution
  • Resistive touch control
  • Supports any revision of Raspberry Pi (directly-pluggable)
  • Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+,4B versions
  • Drivers provided (works with your own Raspbian/Ubuntu directly)
  • Size perfectly fits the Pi
  • High quality immersion gold surface plating
  • Supports Raspbian system, ubuntu system ,kali Linux system

Key Parameters

SKU MPI3501
LCD Type TFT
LCD Interface SPI(Fmax:32MHz)
Touch Screen Type Resistive
Touch Screen Controller XPT2046
Colors 65536
Driver IC ILI9486
Backlight LED
Resolution 320*480 (Pixel)
Backlight Current 120ma
Power Dissipation 0.13A*5V
Operating Temp. (℃) -20~60
Active Area 48.96x73.44(mm)
Product Size 85.42*55.60(mm)
Package Size 118*72*34 (mm)
Rough Weight(Package containing) 75 (g)

Interface

PIN NO. SYMBOL DESCRIPTION
1, 17 3.3V Power positive (3.3V power input)
2, 4 5V Power positive (5V power input)
3, 5, 7, 8, 10, 12, 13, 15, 16 NC NC
6, 9, 14, 20, 25 GND Ground
11 TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching
18 LCD_RS Instruction/Data Register selection
19 LCD_SI / TP_SI SPI data input of LCD/Touch Panel
21 TP_SO SPI data output of Touch Panel
22 RST Reset
23 LCD_SCK / TP_SCK SPI clock of LCD/Touch Panel
24 LCD_CS LCD chip selection, low active
26 TP_CS Touch Panel chip selection, low active

Driver Installation

This LCD Module need install driver first.

Step 1：Download the Raspbian IMG

https://www.raspberrypi.com/software/operating-systems/

Step 2: Burn the system image

If you don't know how to do that,you can refer to the Raspberry Pi office tutorial

Step 3: Open terminal(SSH) and install the driver on RaspberryPi

(tested on RaspberryPi 3B+,3B,2B,2B+,1B,ZERO)

Run:

sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD35-show

Wait A Few Minutes, when the system reboot ok, you can see that.

Touch screen calibration

  • This LCD can be calibrated using a program called xinput_calibrator
  • Install it with the commands:
cd LCD-show/

sudo dpkg -i -B xinput-calibrator_0.7.5-1_armhf.deb
  • Click the Men button on the task bar, choose Preference -> Calibrate Touchscreen.
  • Finish the touch calibration following the prompts. Maybe rebooting is required to make calibration active.
  • You can create a 99-calibration.conf file to save the touch parameters (not necessary if file exists).
/ect/X11/xorg.conf.d/99-calibration.conf
  • Save the touch parameters (may differ depending on LCD) to 99-calibration.conf, as shown in the picture:

How to rotate the display direction

  • Step 1，If the driver is not installed, execute the following command (Raspberry Pi needs to connected to the Internet):
sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD35-show

After execution, the driver will be installed.

  • Step 2，If the driver is already installed, execute the following command:
cd LCD-show/
sudo ./rotate.sh 90

After execution, the system will automatically restart, and the display screen will rotate 90 degrees to display and touch normally.
（ ' 90 ' can be changed to 0, 90, 180 and 270, respectively representing rotation angles of 0 degrees, 90 degrees, 180 degrees, 270 degrees）
If the rotate.sh prompt cannot be found, use Step 1 to install the latest drivers

Download Resources

  • Document
  1. How_to_install_the_LCD_driver_V1.2
  2. How_to_install_matchbox-keyboard
  3. How_to_calibrate_the_resistance_touch_screen-V1.2
  4. How_to_use_Raspberry_Pi_Getting Star.pdf
  5. How_to_change_display_direction-GPIO-Resistive_Touch-V1.2
  6. MPI3501-3.5inch-RPi-Display-User-Manual-V1.0
  • Driver download
download::LCD-show.tar.gz
  • Images download
If you have difficulty installing the driver, or if you still can't use the display properly after installing the driver,
Please Try our Configned images for tested.
Just need download and write the image into the TF card. DO NOT need any driver installation steps.
Image Name Version Support Password Download
Raspbian 2024-11-19 PI5/PI4/PI3B+/PI3/

PI2/PI1/ZERO/ZERO W

user:pi

password:raspberry

BaiduYun: MPI3501-3.5inch-2024-11-19-raspios-bookworm-armhf(support Pi4/5) 提取码：n5zl
Mega: MPI3501-3.5inch-2022-04-04-raspios-bullseye-armhf.7z
Ubuntu-MATE-32bit 22.04 PI4,PI3B+,PI3,PI2 user:pi

password:raspberry

BaiduYun: MPI3501-3.5inch-ubuntu-mate-22.04-desktop-armhf+raspi.7z 提取码：22e9
Mega: MPI3501-3.5inch-ubuntu-mate-22.04-desktop-armhf+raspi.7z
Kali Linux RaspberryPi-32bit 2024.3 PI4B,PI3B+,PI3,PI2 user: kali

password: kali

BaiduYun: MPI3501-3.5inch-kali-linux-2024.3 提取码：vqt3
Mega: MPI3501-3.5inch-kali-linux-2022.1


  • Software
  1. Panasonic SDFormatter
  2. Win32DiskImager
  3. PuTTY

BACK TO TOP

Retrieved from "http://www.lcdwiki.com/index.php?title=3.5inch_RPi_Display&oldid=5132"
Contents
Last modified
This page was last edited on 26 November 2024, at 17:40.