More actions
| (2 intermediate revisions by the same user not shown) | |||
| Line 121: | Line 121: | ||
| align="center" |5 | | align="center" |5 | ||
| align="center" |RES | | align="center" |RES | ||
| align="center" |OLED | | align="center" |OLED reset signal, low level reset, May not be used(The module has a reset circuit, which can be powered on and reset) | ||
|- | |- | ||
|} | |} | ||
| Line 127: | Line 127: | ||
==<font color="blue">Product Documentation</font> == | ==<font color="blue">Product Documentation</font> == | ||
* [http://www.lcdwiki.com/res/ | * [http://www.lcdwiki.com/res/MC154GX/1.54inch_OLED_SSD1309_IIC_Module_MC154GX_User_Manual_EN.pdf '''1.54inch IIC_OLED Module User Manual'''] | ||
* [http://www.lcdwiki.com/res/ | * [http://www.lcdwiki.com/res/MC154GX/OLED154W&OLED154B_SPEC.pdf '''1.54inch OLED Specification'''] | ||
* [http://www.lcdwiki.com/ | * [http://www.lcdwiki.com/res/MC154GX/1.54inch_OLED_IIC_SSD1309_Size.pdf '''1.54inch IIC_OLED Module Size Picture'''] | ||
* [http://www.lcdwiki.com/res/ | * [http://www.lcdwiki.com/res/MC154GX/1.54inch_OLED_IIC_SSD1309_Schematic.pdf '''1.54inch IIC_OLED Module Schematic'''] | ||
* [http://www.lcdwiki.com/res/ | * [http://www.lcdwiki.com/res/MC154GX/Altium_Package_Library.zip '''1.54inch IIC_OLED Module OLED Schematic and PCB Package Library'''] | ||
* [http://www.lcdwiki.com/res/ | * [http://www.lcdwiki.com/res/MC154GX/SSD1309.pdf '''Driver ICSSD1309 Datasheet'''] | ||
==<font color="blue">Program Download</font> == | ==<font color="blue">Program Download</font> == | ||
* [http://www.lcdwiki.com/res/Program/OLED/1. | * [http://www.lcdwiki.com/res/Program/OLED/1.54inch/IIC_SSD1309_MC154GX_V1.0/1.54inch_OLED_SSD1309_IIC_Module_MC154GX_V1.0.zip '''1.54inch IIC_OLED Module Package'''] | ||
==<font color="blue">Reference Materials</font> == | ==<font color="blue">Reference Materials</font> == | ||
Latest revision as of 18:51, 13 September 2022
Product Picture
Product Description
- 1.54 inch OLED screen with black and white or black and blue color display
- 128x64 resolution for clear display and high contrast
- Large viewing angle: greater than 160° (one screen with the largest viewing angle in the display)
- Wide voltage supply (3V~5V), compatible with 3.3V and 5V logic levels, no level shifting chip required
- With IIC bus, only a few IOs can be used to light up the display
- Ultra-low power consumption: normal display is only 0.06W (far below the TFT display)
- Military-grade process standards, long-term stable work
- Provides a rich sample program for STM32, C51, Arduino, Raspberry Pi and MSP430 platforms
- Provide underlying driver technical support
Product Parameters
| Name | Parameter |
| Display Color | white/blue |
| SKU | MC154GW/MC154GB |
| Screen Size | 1.54(inch) |
| Screen Type | OLED |
| Driver IC | SSD1309 |
| Resolution | 128*64 (Pixel) |
| Module Interface | IIC interface |
| Active Area | 35.052x17.516(mm) |
| Touch Screen Type | have no touch screen |
| Touch IC | have no IC |
| Module PCB Size | 42.40x38.00(mm) |
| Visual Angle | >160° |
| Operating Temperature | -20℃~60℃ |
| Storage Temperature | -30℃~70℃ |
| Operating Voltage | 3.3V~5V |
| Power Consumption | TBD |
| Rough Weight(Package containing) | 12(g) |
Interface Definition
|
|
|---|---|
| Picture 1. Module pin silk screen | Picture 2. Rear view of the module |
NOTE:
- 1.This module supports IIC slave device address switching (shown in red box in Picture 4), as follows:
- A.Solder the 0x78 side resistance, disconnect the 0x7A side, then select the 0x78 slave address (default);
- B.Solder the 0x7A side resistance, disconnect the 0x78 side, then select the 0x7A slave address;
- 2.The hardware switches the IIC slave device address, and the software also needs to be modified accordingly.
- For details, see the test program description document or the user manual..
| Number | Module Pin | Pin description |
| 1 | GND | OLED power ground |
| 2 | VCC | OLED power positive (3.3V~5V) |
| 3 | SCL | OLED IIC bus clock signal |
| 4 | SDA | OLED IIC bus data signal |
| 5 | RES | OLED reset signal, low level reset, May not be used(The module has a reset circuit, which can be powered on and reset) |
Product Documentation
- 1.54inch IIC_OLED Module User Manual
- 1.54inch OLED Specification
- 1.54inch IIC_OLED Module Size Picture
- 1.54inch IIC_OLED Module Schematic
- 1.54inch IIC_OLED Module OLED Schematic and PCB Package Library
- Driver ICSSD1309 Datasheet
Program Download
Reference Materials
- Arduino IDE software use illustration
- RaspberryPi GPIO library installation instructions
- Python Image Library installation instructions
- C51 Keil and stc-isp software use illustration
- STM32 keil software use illustration
- IAR_IDE and MspFet software use illustration
- PCtoLCD2002 software use illustration
- Image2Lcd software use illustration
- Chinese and English display modulo settings