Toggle search
Toggle menu
14
832
7
5,040
LCD wiki
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

2.42inch SPI OLED Module SKU:MSP242X: Difference between revisions

From LCD wiki
More actions
VisualWikitext
Lin (talk | contribs)
2,030 edits
Created page with "{{lan | cn=http://www.lcdwiki.com/zh/2.42inch_SPI_OLED_Module_SKU:MSP242X | en=http://www.lcdwiki.com/2.42inch_SPI_OLED_Module_SKU:MSP242X }} ==<font color="blue">..."
 
Lin (talk | contribs)
2,030 edits
 
(6 intermediate revisions by the same user not shown)
Line 15: Line 15:
*Large viewing angle: greater than 160 ° (the screen with the largest viewing angle in the display screen)
*Large viewing angle: greater than 160 ° (the screen with the largest viewing angle in the display screen)
*Wide voltage power supply (3V~5V), compatible with 3.3V and 5V logic levels, without the need for level conversion chips
*Wide voltage power supply (3V~5V), compatible with 3.3V and 5V logic levels, without the need for level conversion chips
*Adopting IIC bus communication, only 4 IO ports are needed to light up
*By default, 4-wire SPI serial bus is used, supporting switching to IIC bus
*Equipped with an iron frame, it can effectively protect the display screen
*Equipped with an iron frame, it can effectively protect the display screen
*Ultra low power consumption (much lower than TFT display screen)
*Ultra low power consumption (much lower than TFT display screen)
Line 48: Line 48:
|-
|-
| align="center" |Display Interface
| align="center" |Display Interface
| align="center" |IIC
| align="center" |4-Wire SPI(default)/IIC
|-
|-
| align="center" |Pixel Size
| align="center" |Pixel Size
Line 87: Line 87:
|-
|-
| align="center" |SKU
| align="center" |SKU
| align="center" |MC242GW (White)/MC242GB (Blue)/MC242GY (Yellow)
| align="center" |MSP242W (White)/MSP242B (Blue)/MSP242Y (Yellow)
|-
|-
| align="center" |Interface
| align="center" |Interface
| align="center" |5Pin 2.54mm Header(RES defaults to not welding)
| align="center" |7Pin 2.54mm Header
|-
|-
| align="center" |Weight(including  package)
| align="center" |Weight(including  package)
| align="center" |23g
| align="center" |25g
|}
|}


Line 107: Line 107:
|-
|-
| align="center" |'''①'''
| align="center" |'''①'''
| align="center" |'''5 Pin Header'''
| align="center" |'''7 Pin Header'''
|2.54mm spacing row pins, module signal input pins(RES defaults to not welding)
|2.54mm spacing row pins, module signal input pins
|-
|-
| align="center" |'''②'''
| align="center" |'''②'''
| align="center" |'''IIC switches resistance from device address'''
| align="center" |'''Communication Interface Switching Resistor'''
|Solder to 0x78 ,using 0x78 slave device address
|If only R5 resistors are welded, use SPI communication  interface (default)


Soldered to 0x7A, using 0x7A from device address
If only R4 and R9 resistors are welded, use the IIC  communication interface
|-
| align="center" |'''③'''
| align="center" |'''CS  Pin Grounding Resistance'''
|R8 resistors are not welded by default. If the R8 resistor is  welded, the CS pin can be suspended
|}
|}


Line 134: Line 138:
| align="center" |3
| align="center" |3
| align="center" |'''SCL'''
| align="center" |'''SCL'''
|IIC bus clock signal
|Using SPI interface: SPI bus clock  signal
 
Using IIC interface: IIC bus clock signal
|-
|-
| align="center" |4
| align="center" |4
| align="center" |'''SDA'''
| align="center" |'''SDA'''
|IIC bus data signal
|Using SPI interface: SPI bus to write  data signals
 
Using IIC interface: IIC bus data signal
|-
|-
| align="center" |5
| align="center" |5
| align="center" |'''RES'''
| align="center" |'''RES'''
|The pin arrangement is not soldered by default. If the reset function needs to be controlled in the program, it needs to be  soldered
|OLED screen reset control signal, low-level reset  (if using IIC interface, this pin can be left unchecked and connected to 3.3V  high-level)
|-
| align="center" |6
| align="center" |'''DC'''
|Using SPI interface: OLED screen  command/data selection control signal (high level: data, low level: command)
 
Using IIC interface: The IIC bus selects signals from the device address (high level: 0x7A, low level: 0x78, which can be controlled by the master GPIO or connected to 3.3V high level or GND)
|-
| align="center" |7
| align="center" |'''CS'''
|OLED screen chip selection control signal, effective  at low level (if R8 resistor is soldered, this pin can be suspended. If R8 resistor is not soldered, when using IIC interface, this pin must be  connected to low level, which can be controlled by master GPIO or GND)
|-
|-
|}
|}
Line 148: Line 166:
==<font color="blue">Product Documentation</font> ==
==<font color="blue">Product Documentation</font> ==


* [http://www.lcdwiki.com/res/MC242GX/MC242GX_Specification_EN_V1.0.pdf '''2.42inch OLED IIC Module Specification''']
* [http://www.lcdwiki.com/res/MSP242X/MSP242X_Specification_EN_V1.0.pdf '''2.42inch OLED SPI_IIC Module Specification''']
* [http://www.lcdwiki.com/res/MC242GX/2.42inch_OLED_IIC_Module_MC242GX_User_Manual_EN.pdf '''2.42inch OLED IIC Module User Manual''']
* [http://www.lcdwiki.com/res/MSP242X/2.42inch_OLED_SPI_IIC_Module_MSP242X_User_Manual_EN.pdf '''2.42inch OLED SPI_IIC Module User Manual''']
* [http://www.lcdwiki.com/res/MC242GX/2.42inch_SSD1309_Init.txt '''2.42inch OLED SSD1309 initialization''']
* [http://www.lcdwiki.com/res/MSP242X/2.42inch_SSD1309_Init.txt '''2.42inch OLED SSD1309 initialization''']
* [http://www.lcdwiki.com/res/MC242GX/OLED242W_SPEC.pdf '''2.42inch OLED Screen Specifications(White)''']
* [http://www.lcdwiki.com/res/MSP242X/OLED242W_SPEC.pdf '''2.42inch OLED Screen Specifications(White)''']
* [http://www.lcdwiki.com/res/MC242GX/OLED242B_SPEC.pdf '''2.42inch OLED Screen Specifications(Blue)''']
* [http://www.lcdwiki.com/res/MSP242X/OLED242B_SPEC.pdf '''2.42inch OLED Screen Specifications(Blue)''']
* [http://www.lcdwiki.com/res/MC242GX/OLED242Y_SPEC.pdf '''2.42inch OLED Screen Specifications(Yellow)''']
* [http://www.lcdwiki.com/res/MSP242X/OLED242Y_SPEC.pdf '''2.42inch OLED Screen Specifications(Yellow)''']
* [http://www.lcdwiki.com/res/MC242GX/2.42inch_IIC_Module_MC242GX_Size.pdf '''2.42inch OLED IIC Module Size Picture''']
* [http://www.lcdwiki.com/res/MSP242X/2.42inch_SPI_IIC_Module_MSP242X_Size.pdf '''2.42inch OLED SPI_IIC Module Size Picture''']
* [http://www.lcdwiki.com/res/MC242GX/2.42inch_IIC_Module_MC242GX_Schematic.pdf '''2.42inch OLED IIC Module Schematic''']
* [http://www.lcdwiki.com/res/MSP242X/2.42inch_SPI_IIC_Module_MSP242X_Schematic.pdf '''2.42inch OLED SPI_IIC Module Schematic''']
* [http://www.lcdwiki.com/res/MC242GX/Altium_2.42inch_OLED_24pin_OLED242X_Package_library.zip '''2.42inch OLED Screen Schematic and PCB package library''']
* [http://www.lcdwiki.com/res/MSP242X/Altium_2.42inch_OLED_24pin_OLED242X_Package_library.zip '''2.42inch OLED Screen Schematic and PCB package library''']
* [http://www.lcdwiki.com/res/MC242GX/SSD1309.pdf '''OLED Screen Driver IC SSD1309 Data sheet''']
* [http://www.lcdwiki.com/res/MSP242X/SSD1309.pdf '''OLED Screen Driver IC SSD1309 Data sheet''']


==<font color="blue">Program Download</font> ==
==<font color="blue">Program Download</font> ==


* [http://www.lcdwiki.com/res/Program/OLED/2.42inch/IIC_SSD1309_MC242GX_V1.0/2.42inch_OLED_SSD1309_IIC_Module_MC242GX_V1.0.zip '''2.42inch OLED IIC Module MC242GX Package''']
* [http://www.lcdwiki.com/res/Program/OLED/2.42inch/SPI_IIC_SSD1309_MSP242X_V1.0/2.42inch_OLED_SSD1309_SPI_IIC_Module_MSP242X_V1.0.zip '''2.42inch OLED SPI_IIC Module MC242GX Package''']


==<font color="blue">Reference Materials</font> ==
==<font color="blue">Reference Materials</font> ==


* [http://www.lcdwiki.com/res/MC242GX/2.42inch_OLED_IIC_MC242GX_C51_Demo_Instructions_EN.pdf '''2.42inch OLED IIC Module C51 Demo Instructions''']
* [http://www.lcdwiki.com/res/MSP242X/2.42inch_OLED_SPI_IIC_MSP242X_C51_Demo_Instructions_EN.pdf '''2.42inch OLED SPI_IIC Module C51 Demo Instructions''']
* [http://www.lcdwiki.com/res/MC242GX/2.42inch_OLED_IIC_MC242GX_CH32_Demo_Instructions_EN.pdf '''2.42inch OLED IIC Module CH32 Demo Instructions''']
* [http://www.lcdwiki.com/res/MSP242X/2.42inch_OLED_SPI_IIC_MSP242X_CH32_Demo_Instructions_EN.pdf '''2.42inch OLED SPI_IIC Module CH32 Demo Instructions''']
* [http://www.lcdwiki.com/res/MC242GX/2.42inch_OLED_IIC_MC242GX_ESP32_Demo_Instructions_EN.pdf '''2.42inch OLED IIC Module ESP32 Demo Instructions''']
* [http://www.lcdwiki.com/res/MSP242X/2.42inch_OLED_SPI_IIC_MSP242X_ESP32_Demo_Instructions_EN.pdf '''2.42inch OLED SPI_IIC Module ESP32 Demo Instructions''']
* [http://www.lcdwiki.com/res/MC242GX/2.42inch_OLED_IIC_MC242GX_STM32_Demo_Instructions_EN.pdf '''2.42inch OLED IIC Module STM32 Demo Instructions''']
* [http://www.lcdwiki.com/res/MSP242X/2.42inch_OLED_SPI_IIC_MSP242X_STM32_Demo_Instructions_EN.pdf '''2.42inch OLED SPI_IIC Module STM32 Demo Instructions''']
* [http://www.lcdwiki.com/res/MC242GX/2.42inch_OLED_IIC_MC242GX_UNO_Mega2560_Demo_Instructions_EN.pdf '''2.42inch OLED IIC Module UNO_Mega2560 Demo Instructions''']
* [http://www.lcdwiki.com/res/MSP242X/2.42inch_OLED_SPI_IIC_MSP242X_UNO_Mega2560_Demo_Instructions_EN.pdf '''2.42inch OLED SPI_IIC Module UNO_Mega2560 Demo Instructions''']
* [http://www.lcdwiki.com/res/MC242GX/2.42inch_OLED_IIC_MC242GX_RaspberryPi_Demo_Instructions_EN.pdf '''2.42inch OLED IIC Module RaspberryPi Demo Instructions''']
* [http://www.lcdwiki.com/res/MSP242X/2.42inch_OLED_SPI_IIC_MSP242X_RaspberryPi_Demo_Instructions_EN.pdf '''2.42inch OLED SPI_IIC Module RaspberryPi Demo Instructions''']
* [http://www.lcdwiki.com/res/PublicFile/Arduino_development_environment_construction_for_ESP32_EN.pdf '''Arduino development environment construction for ESP32''']
* [http://www.lcdwiki.com/res/PublicFile/Arduino_development_environment_construction_for_ESP32_EN.pdf '''Arduino development environment construction for ESP32''']
* [http://www.lcdwiki.com/res/PublicFile/PCtoLCD2002_Use_Illustration_EN.pdf '''PCtoLCD2002 software use illustration''']
* [http://www.lcdwiki.com/res/PublicFile/PCtoLCD2002_Use_Illustration_EN.pdf '''PCtoLCD2002 software use illustration''']

Latest revision as of 18:32, 15 August 2023

语言选择

Languages

➤中文
➤EN


Product Picture

Product Description

  • 2.42” OLED monochrome screen, equipped with three monochrome displays: white, yellow, and blue
  • 128x64 resolution, clear display effect, high contrast
  • Large viewing angle: greater than 160 ° (the screen with the largest viewing angle in the display screen)
  • Wide voltage power supply (3V~5V), compatible with 3.3V and 5V logic levels, without the need for level conversion chips
  • By default, 4-wire SPI serial bus is used, supporting switching to IIC bus
  • Equipped with an iron frame, it can effectively protect the display screen
  • Ultra low power consumption (much lower than TFT display screen)
  • Provide rich example learning programs (ESP32/STM32/ Arduino/C51/CH32/RaspberryPi)
  • Provide low-level driver technical support, and update WIKI information online
  • Multiple tests for module aging can meet military level standards, supporting long-term stable work

Product Parameters

Name Parameter
Display Screen Parameters
Screen Size 2.42 inch
Screen Type OLED
Resolution 128x64 (pixels)
Active Area (AA area) 55.01(W)x27.49(H)(mm)
Display Color White/Blue/Yellow (Monochrome)
Driver IC SSD1309
Display Interface 4-Wire SPI(default)/IIC
Pixel Size 0.43(H)x0.43(V)(mm)
View Angle ALL 0’CLOCK
Brightness(TYP) 110(cd/m2)
Operation Temperature -40~70(℃)
Storage Temperature -40~85(℃)
Size Parameters
OLED Outline Size 60.5±0.2(W)x37.0±0.2(H)x2.0±0.1(D)(mm)(Excluding cables and adhesive backing)
Module Outline Size 72.0(W)x43.0(H)x12.39(D)(mm)(including Pin Header)
Electrical Parameters
Working Voltage 5.0/3.3V
Working Current 52 mA(Max)
Power 0.26W(Max)
Other Parameters
SKU MSP242W (White)/MSP242B (Blue)/MSP242Y (Yellow)
Interface 7Pin 2.54mm Header
Weight(including package) 25g

Interface Definition

  • Interface Function Description
Number Interface Function Description
① 7 Pin Header 2.54mm spacing row pins, module signal input pins
② Communication Interface Switching Resistor If only R5 resistors are welded, use SPI communication interface (default)

If only R4 and R9 resistors are welded, use the IIC communication interface

③ CS Pin Grounding Resistance R8 resistors are not welded by default. If the R8 resistor is welded, the CS pin can be suspended
  • Pin Function Description
Number Pin Label Description
1 GND OLED screen power supply ground
2 VCC OLED screen power supply positive pole (connected to 5V/3.3V)
3 SCL Using SPI interface: SPI bus clock signal

Using IIC interface: IIC bus clock signal

4 SDA Using SPI interface: SPI bus to write data signals

Using IIC interface: IIC bus data signal

5 RES OLED screen reset control signal, low-level reset (if using IIC interface, this pin can be left unchecked and connected to 3.3V high-level)
6 DC Using SPI interface: OLED screen command/data selection control signal (high level: data, low level: command)

Using IIC interface: The IIC bus selects signals from the device address (high level: 0x7A, low level: 0x78, which can be controlled by the master GPIO or connected to 3.3V high level or GND)

7 CS OLED screen chip selection control signal, effective at low level (if R8 resistor is soldered, this pin can be suspended. If R8 resistor is not soldered, when using IIC interface, this pin must be connected to low level, which can be controlled by master GPIO or GND)

Product Documentation

Program Download

Reference Materials

Common Software

BACK TO TOP

Retrieved from "http://www.lcdwiki.com/index.php?title=2.42inch_SPI_OLED_Module_SKU:MSP242X&oldid=4563"
Contents
Last modified
This page was last edited on 15 August 2023, at 18:32.