How to install the LCD driver: Difference between revisions

Latest revision as of 13:52, 10 October 2019

语言选择 Languages
➤中文
➤EN

Raspberry Pi LCD Driver installation instruction (method 1: online installation)

This manual is applicable to all series of Raspberry Pi LCD, Raspberry Pi board should be connected to Internet during the installation.

Step 1, Install Raspbian official image

1) Download the latest Raspbian Image from the official website: https://www.raspberrypi.org/downloads/
2) Format Micro SD card by SDFormatter
3) Burn the official image into Micro SD car by using Win32DiskImager

Step 2, obtain the LCD driver

Log onto the Raspberry Pi users system to command line (The initial user name: pi Password: raspberry) Get the newest driver from GitHub (Raspberry Pi LCD should be connected to internet)

sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/

Step 3, install LCD driver

In case of 2.4” RPi Display (MPI2401):

sudo ./LCD24-show

In case of 2.4” RPi Display For RPi 3A+ (MPI2411):

sudo ./LCD24-3A+-show

In case of 2.8” RPi Display (MPI2801):

sudo ./LCD28-show

In case of 3.2” RPi Display (MPI3201):

sudo ./LCD32-show

In case of MHS-3.2” RPi Display (MHS3232):

sudo ./MHS32-show

In case of 3.5” RPi Display(MPI3501):

sudo ./LCD35-show

In case of 3.5” HDMI Display-B(MPI3508):

sudo ./MPI3508-show

In case of MHS-3.5” RPi Display(MHS3528):

sudo ./MHS35-show

In case of 4.0" HDMI Display(MPI4008):

sudo ./MPI4008-show

In case of MHS-4.0" HDMI Display-B(MHS4001):

sudo ./MHS40-show

In case of 5.0” HDMI Display(Resistance touch)(MPI5008):

sudo ./LCD5-show

In case of 5inch HDMI Display-B(Capacitor touch)(MPI5001):

sudo ./MPI5001-show

In case of 7inch HDMI Display-B-800X480(MPI7001):

sudo ./LCD7B-show

In case of 7inch HDMI Display-C-1024X600(MPI7002):

sudo ./LCD7C-show

Wait for a moment after executing the above command, then you can use the corresponding raspberry LCD.

Raspberry Pi LCD Driver installation instruction (method 2: offline)

This manual is applicable to all series of Raspberry Pi LCD; if you already have the driver installation CD, can just use it offline.

Step 1, Install Raspbian official image

1) Download the latest Raspbian Image from the official website: https://www.raspberrypi.org/downloads/
2) Format Micro SD car by SDFormatter
3) Burn the official image into Micro SD car by using Win32DiskImager

Step 2, obtain the LCD driver

Extract from the companion CD or ask for it from the seller; Copy the LCD-show.tar.gz drive to the Raspberry Pi system root directory (Suggestion: copy flash driver directly to Micro SD car after completion of Step 1, or copy by SFTP or other methods for remote copy). Unzip and extract drive files as the following command:

cd /boot
sudo tar zxvf LCD-show.tar.gz
cd LCD-show/

Step 3, install LCD driver

The Same step as 【method1 Step3】.BACK to Step3

@@ Line 19: / Line 19: @@
 Get the newest driver from''' GitHub''' (Raspberry Pi LCD should be connected to internet)
 {{code|
+sudo rm -rf LCD-show
 git clone https://github.com/goodtft/LCD-show.git
 chmod -R 755 LCD-show
@@ Line 28: / Line 29: @@
 {{code|
 sudo ./LCD24-show   }}
+* In case of 2.4” RPi Display For RPi 3A+ (MPI2411):
+{{code|
+sudo ./LCD24-3A+-show   }}
 * In case of 2.8” RPi Display (MPI2801):
@@ Line 36: / Line 41: @@
 {{code|
 sudo ./LCD32-show   }}
+* In case of MHS-3.2” RPi Display (MHS3232):
+{{code|
+sudo ./MHS32-show   }}
 * In case of 3.5” RPi Display(MPI3501):
@@ Line 44: / Line 53: @@
 {{code|
 sudo ./MPI3508-show   }}
+* In case of MHS-3.5” RPi Display(MHS3528):
+{{code|
+sudo ./MHS35-show   }}
 * In case of 4.0" HDMI Display(MPI4008):
 {{code|
 sudo ./MPI4008-show  }}
+* In case of MHS-4.0" HDMI Display-B(MHS4001):
+{{code|
+sudo ./MHS40-show  }}
 * In case of 5.0” HDMI Display(Resistance touch)(MPI5008):
@@ Line 64: / Line 81: @@
 {{code|
 sudo ./LCD7C-show   }}
-* the corresponding execution to switch back to Traditional HDMI display.
-{{code|
-sudo ./LCD-hdmi   }}
 * Wait for a moment after executing the above command, then you can use the corresponding raspberry LCD.
 == <font color="blue">'''<big>Raspberry Pi LCD Driver installation instruction (method 2: offline)</big>'''</font>  ==
@@ Line 83: / Line 95: @@
 ==   <font color="deepskyblue">Step 2, obtain the LCD driver                              </font>    ==
 Extract from the companion CD or ask for it from the seller;
-Copy the '''LCD-show.tar.gz''' drive to the Raspberry Pi system root directory (Suggestion: copy flash driver directly to Micro SD car after completion of Step 1, or copy by SFTP or other methods for remote copy). Unzip and extract drive files as the following command:
+Copy the [http://www.lcdwiki.com/res/RaspDriver/LCD-show.tar.gz LCD-show.tar.gz] drive to the Raspberry Pi system root directory (Suggestion: copy flash driver directly to Micro SD car after completion of Step 1, or copy by SFTP or other methods for remote copy). Unzip and extract drive files as the following command:
 {{code|
@@ Line 91: / Line 103: @@
 ==   <font color="deepskyblue">Step 3, install LCD driver                                                                </font>  ==
-The Same step as method1 Step3.[[#Step 3, install LCD driver|BACK to Step3]]
+The Same step as 【method1 Step3】.[[#Step 3, install LCD driver|BACK to Step3]]