1.8inch SPI Module ST7735S SKU:MSP1804

语言选择 Languages

➤中文

➤EN

Product Picture

Product Description

• 1.8-inch color screen,support 65K color display,display rich colors
• 128X160 resolution, clear display
• Using the SPI serial bus, it only takes a few IOs to illuminate the display
• With SD card slot for convenient function expansion
• Provide underlying libraries and rich sample programs for Arduino, C51, and STM32 platforms
• Military-grade process standards, long-term stable work
• Provide underlying driver technical support

Product Parameters

Name	Parameter
Display Color	16BIT RGB 65K color
SKU	MSP1804
Screen Size	1.8(inch)
Type	TFT
Driver IC	ST7735S
Resolution	128*160 (Pixel)
Module Interface	4-wire SPI interface
Backlight	2 White Led
Active Area (AA area)	28.03x35.04 (mm)
Module PCB Size	44.96x53.47 (mm)
Operating Temperature	-10℃~70℃
Storage Temperature	-20℃~70℃
VCC power voltage	3.3V~5V
Logic IO port voltage	3.3V(TTL)
Power Consumption	About 90mA
Product Weight	About 25(g)

Interface Definition

Number	Pin Label	Description
1	RST	LCD reset signal, low level reset
2	CS	LCD chip select signal, low level enable
3	D/C	LCD register / data selection signal, high level: register, low level: data
4	DIN	LCD SPI bus write data signal
5	CLK	LCD SPI bus clock signal
6	VCC	LCD Power positive (3.3V~5V)
7	BL	Backlight control, high level lighting, if not controlled, connect 3.3V always bright
8	GND	LCD Power ground

Product Documentation

• 2.2 inch SPI Module User Manual
• 2.2 inch TFT Specifications
• 2.2 inch SPI Module Size Picture
• 2.2 inch SPI Module Schematic
• Driver IC ILI9341 Data sheet

• 1.8 inch SPI Module User Manual
• 1.8 inch TFT Specifications
• [123 1.8 inch SPI Module Size Picture]
• 1.8 inch SPI Module Schematic
• Driver IC ST7735S Data sheet

Program Download

1. [ Demo_Arduino_Mega2560_Hardware_SPI]
2. [ Demo_Arduino_Mega2560_Software_SPI]
3. [ Demo_Arduino_UNO_Hardware_SPI]
4. [ Demo_Arduino_UNO_Software_SPI]
5. [ Demo_C51_STC12C5A60S2_Hardware_SPI]
6. [ Demo_C51_STC12C5A60S2_Software_SPI]
7. [ Demo_C51_STC89C52RC_Software_SPI]
8. [ Demo_STM32F103RCT6_Hardware_SPI]
9. [ Demo_STM32F103RCT6_Software_SPI]
10. [ Demo_STM32F103ZET6_Hardware_SPI]
11. [ Demo_STM32F103ZET6_Software_SPI]
12. [ Demo_STM32F407ZGT6_Hardware_SPI]
13. [ Demo_STM32F407ZGT6_Software_SPI]
14. [ Demo_STM32F429IGT6_Hardware_SPI]
15. [Demo_STM32F429IGT6_Software_SPI]

• [ 1.8 inch SPI Module Package(The above program is packaged with one click download)]

Reference Materials

• Arduino IDE software use illustration
• C51 Keil and stc-isp software use illustration
• STM32 keil software use illustration
• PCtoLCD2002 software use illustration
• Image2Lcd software use illustration
• Chinese and English display modulo settings

How to use on Arduino

• Module instructions for use on the Arduino

Common Software

• PCtoLCD2002
• Image2Lcd

BACK TO TOP