Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

2.2inch SPI Module ILI9341 SKU:MSP2202: Difference between revisions

From LCD wiki
Lin (talk | contribs)
Lin (talk | contribs)
Line 129: Line 129:
==<font color="blue">Program Download</font> ==
==<font color="blue">Program Download</font> ==


* [http://www.lcdwiki.com/res/Program/%E6%99%AE%E9%80%9A%E6%A8%A1%E5%9D%97SPI/2.2inch/SPI_ILI9341_MSP2202_V1.1/2.2inch_SPI_Module_ILI9341_MSP2202_V1.1.zip '''2.2 inch SPI Module Package''']
* [http://www.lcdwiki.com/res/Program/Common_SPI/2.2inch/SPI_ILI9341_MSP2202_V1.1/2.2inch_SPI_Module_ILI9341_MSP2202_V1.1.zip '''2.2 inch SPI Module Package''']


==<font color="blue">Reference Materials</font> ==
==<font color="blue">Reference Materials</font> ==

Revision as of 09:27, 23 February 2019

语言选择

Languages

➤中文
➤EN


Product Video

Product Picture

Product Description

  • 2.2-inch color screen,support 65K color display,display rich colors
  • 320X240 resolution, clear display
  • Using the SPI serial bus, it only takes a few IOs to illuminate the display
  • Easy to expand the experiment with SD card slot
  • Provide a rich sample program
  • Military-grade process standards, long-term stable work
  • Provide underlying driver technical support

Product Parameters

Name Parameter
Display Color RGB 65K color
SKU MSP2202
Screen Size  2.2(inch)
Type TFT
Driver IC ILI9341
Resolution 320*240 (Pixel)
Module Interface 4-wire SPI interface
Active Area (AA area) 33.84x45.12(mm)
Module PCB Size 40.10x67.20(mm)
Operating Temperature -20℃~70℃
Storage Temperature -30℃~80℃
VCC power voltage 3.3V~5V
Logic IO port voltage 3.3V(TTL)
Power Consumption About 90mA
Product Weight 25(g)

Interface Definition

Number Pin Label Description
1 VCC 5V/3.3V power input
2 GND Ground
3 CS LCD chip select signal, low level enable
4 RESET LCD reset signal, low level reset
5 DC/RS LCD register / data selection signal,

high level: register, low level: data

6 SDI/MOSI SPI bus write data signal
7 SCK SPI bus clock signal
8 LED Backlight control, high level lighting,

if not controlled, connect 3.3V always bright

9 SDO/MISO SPI bus read data signal, if you do not need to the read function, you can not connect it

Product Documentation

Program Download

Reference Materials

How to use on Arduino

Common Software

BACK TO TOP