More actions
| Line 84: | Line 84: | ||
{| class="FCK__ShowTableBorders" align="left" | {| class="FCK__ShowTableBorders" align="left" | ||
|- | |- | ||
![[file: | ![[file:MC130GX-001.png|无框|300px]] | ||
![[file: | ![[file:MC130GX-002.png|无框|300px]] | ||
|- | |- | ||
| align="center" | '''Picture 1. Module pin silk screen''' | | align="center" | '''Picture 1. Module pin silk screen''' | ||
| Line 106: | Line 106: | ||
|- | |- | ||
| align="center" |1 | | align="center" |1 | ||
| align="center" |GND | |||
| align="center" |OLED power ground | |||
|- | |||
| align="center" |2 | |||
| align="center" |VCC | | align="center" |VCC | ||
| align="center" |OLED power positive (3.3V~5V) | | align="center" |OLED power positive (3.3V~5V) | ||
|- | |- | ||
| align="center" |3 | | align="center" |3 | ||
Revision as of 16:21, 12 August 2019
Product Picture
Product Description
- 1.3 inch OLED screen with black and white or black and blue color display
- 128x64 resolution for clear display and high contrast
- Large viewing angle: greater than 160° (one screen with the largest viewing angle in the display)
- Wide voltage supply (3V~5V), compatible with 3.3V and 5V logic levels, no level shifting chip required
- With IIC bus, only a few IOs can be used to light up the display
- Ultra-low power consumption: normal display is only 0.06W (far below the TFT display)
- Military-grade process standards, long-term stable work
- Provides a rich sample program for STM32, C51, Arduino, Raspberry Pi and MSP430 platforms
- Provide underlying driver technical support
Product Parameters
| Name | Parameter |
| Display Color | white/blue |
| SKU | MC130GW/MC130GB |
| Screen Size | 1.3(inch) |
| Screen Type | OLED |
| Driver IC | SH1106 |
| Resolution | 128*64 (Pixel) |
| Module Interface | IIC interface |
| Active Area | 29.42x14.7(mm) |
| Touch Screen Type | have no touch screen |
| Touch IC | have no IC |
| Module PCB Size | 33.50x35.40(mm) |
| Visual Angle | >160° |
| Operating Temperature | -20℃~60℃ |
| Storage Temperature | -30℃~70℃ |
| Operating Voltage | 3.3V~5V |
| Power Consumption | TBD |
| Rough Weight(Package containing) | 8(g) |
Interface Definition
|
|
|---|---|
| Picture 1. Module pin silk screen | Picture 2. Rear view of the module |
NOTE:
- 1.This module supports IIC slave device address switching (shown in red box in Picture 4), as follows:
- A.Solder the 0x78 side resistance, disconnect the 0x7A side, then select the 0x78 slave address (default);
- B.Solder the 0x7A side resistance, disconnect the 0x78 side, then select the 0x7A slave address;
- 2.The hardware switches the IIC slave device address, and the software also needs to be modified accordingly.
- For details, see the test program description document or the user manual..
| Number | Module Pin | Pin description |
| 1 | GND | OLED power ground |
| 2 | VCC | OLED power positive (3.3V~5V) |
| 3 | SCL | OLED IIC bus clock signal |
| 4 | SDA | OLED IIC bus data signal |
Product Documentation
- 1.3inch IIC_OLED Module User Manual
- 1.3inch OLED Specification
- 1.3inch IIC_OLED Module Size Picture
- 1.3inch IIC_OLED Module Schematic
- 1.3inch IIC_OLED Module OLED Schematic and PCB Package Library
- Driver IC SH1106 Datasheet
Program Download
Reference Materials
- Arduino IDE software use illustration
- RaspberryPi GPIO library installation instructions
- Python Image Library installation instructions
- C51 Keil and stc-isp software use illustration
- STM32 keil software use illustration
- IAR_IDE and MspFet software use illustration
- PCtoLCD2002 software use illustration
- Image2Lcd software use illustration
- Chinese and English display modulo settings