Toggle search
Toggle menu
14
832
7
5,040
LCD wiki
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

SSD1963-RGB Pinboard: Difference between revisions

From LCD wiki
More actions
← Older editNewer edit →
VisualWikitext
Lin (talk | contribs)
2,030 edits
Lin (talk | contribs)
2,030 edits
Line 69: Line 69:
{| class="wikitable" border="1" style="width: 600px; background-color: white;"
{| class="wikitable" border="1" style="width: 600px; background-color: white;"
|-
|-
| align="center" |序号
| align="center" |Number
| align="center" |引脚名称
| align="center" |Pin name
| align="center" |说明
| align="center" |Description
|-
|-
| align="center" |1
| align="center" |1
| align="center" |CS
| align="center" |CS
|液晶屏片选控制引脚（低电平使能）
|LCD reset control pin( low level enable)
|-
|-
| align="center" |2
| align="center" |2
| align="center" |RS
| align="center" |RS
|液晶屏寄存器/数据选择控制引脚（低电平：寄存器，高电平：数据）
|LCD register / data selection control pin(high level: register, low level: data)
|-
|-
| align="center" |3
| align="center" |3
| align="center" |WR
| align="center" |WR
|液晶屏写控制引脚
|LCD write control pin
|-
|-
| align="center" |4
| align="center" |4
| align="center" |RD
| align="center" |RD
|液晶屏读控制引脚
|LCD read control pin
|-
|-
| align="center" |5
| align="center" |5
| align="center" |RST  
| align="center" |RST  
|液晶屏复位控制引脚（低电平复位）
|LCD reset control pin( low level reset)
|-
|-
| align="center" |6~21
| align="center" |6~21
| align="center" |D0~D15
| align="center" |D0~D15
|液晶屏16位数据总线引脚（8位模式下使用D0~D7）
|LCD 16 bit data bus pin (use d0 ~ D7 in 8-bit mode)
|-
|-
| align="center" |22
| align="center" |22
| align="center" |GND
| align="center" |GND
|电源地
|Module power ground pin
|-
|-
| align="center" |23
| align="center" |23
| align="center" |TE
| align="center" |TE
|液晶屏撕裂效应信号引脚（只读）
|LCD tearing effect signal pin (read only)
|-
|-
| align="center" |24
| align="center" |24
| align="center" |NC
| align="center" |NC
|无定义，保留
|No definition, reserved
|-
|-
| align="center" |25
| align="center" |25
| align="center" |NC
| align="center" |NC
|无定义，保留
|No definition, reserved
|-
|-
| align="center" |26
| align="center" |26
| align="center" |GND
| align="center" |GND
|电源地
|Module power ground pin
|-
|-
| align="center" |27
| align="center" |27
| align="center" |GND
| align="center" |GND
|电源地
|Module power ground pin
|-
|-
| align="center" |28
| align="center" |28
| align="center" |5V
| align="center" |5V
|模块电源正极引脚（接5V）
|Module power supply positive pin (connected to 5V)
|-
|-
| align="center" |29
| align="center" |29
| align="center" |TMI
| align="center" |TMI
|电阻触摸屏SPI总线读数据引脚（电容触摸屏没使用）
|Resistance touch screen SPI bus read data pin (capacitor touch screen not used)
|-
|-
| align="center" |30
| align="center" |30
| align="center" |TMO
| align="center" |TMO
|电容触摸屏IIC总线数据引脚（电阻触摸屏SPI总线写数据引脚）
|IIC bus data pin of capacitive touch screen (SPI bus write data pin of resistance touch screen)
|-
|-
| align="center" |31
| align="center" |31
| align="center" |PEN
| align="center" |PEN
|触摸屏中断检测引脚（发生触摸时为低电平）
|Touch screen interrupt detection pin(Low level when a touch occurs)
|-
|-
| align="center" |32
| align="center" |32
| align="center" |NC
| align="center" |NC
|无定义，保留
|No definition, reserved
|-
|-
| align="center" |33
| align="center" |33
| align="center" |TCS
| align="center" |TCS
|电容触摸屏复位引脚（电阻触摸屏片选引脚）
|Capacitor touch screen reset pin (resistance touch screen chip selection pin)
|-
|-
| align="center" |34
| align="center" |34
| align="center" |TCK
| align="center" |TCK
|电容触摸屏IIC总线时钟引脚（电阻触摸屏SPI总线时钟引脚）
|IIC bus clock pin of capacitive touch screen (SPI bus clock pin of resistance touch screen)
|-
|-
|}
|}


*'''STM32开发板软排线输入接口引脚说明'''
*'''STM32 development board flexible cable input interface pin description'''


{| class="wikitable" border="1" style="width: 600px; background-color: white;"
{| class="wikitable" border="1" style="width: 600px; background-color: white;"
|-
|-
| align="center" |序号
| align="center" |Number
| align="center" |引脚名称
| align="center" |Pin name
| align="center" |说明
| align="center" |Description
|-
|-
| align="center" |1
| align="center" |1
| align="center" |TCK
| align="center" |TCK
|电容触摸屏IIC总线时钟引脚（电阻触摸屏SPI总线时钟引脚）
|IIC bus clock pin of capacitive touch screen (SPI bus clock pin of resistance touch screen)
|-
|-
| align="center" |2
| align="center" |2
| align="center" |TCS
| align="center" |TCS
|电容触摸屏复位引脚（电阻触摸屏片选引脚）
|Capacitor touch screen reset pin (resistance touch screen chip selection pin)
|-
|-
| align="center" |3
| align="center" |3
| align="center" |PEN
| align="center" |PEN
|触摸屏中断检测引脚（发生触摸时为低电平）
|Touch screen interrupt detection pin(Low level when a touch occurs)
|-
|-
| align="center" |4
| align="center" |4
| align="center" |TMO
| align="center" |TMO
|电容触摸屏IIC总线数据引脚（电阻触摸屏SPI总线写数据引脚）
|IIC bus data pin of capacitive touch screen (SPI bus write data pin of resistance touch screen)
|-
|-
| align="center" |5
| align="center" |5
| align="center" |TMI  
| align="center" |TMI  
|电阻触摸屏SPI总线读数据引脚（电容触摸屏没使用）
|Resistance touch screen SPI bus read data pin (capacitor touch screen not used)
|-
|-
| align="center" |6
| align="center" |6
| align="center" |5V
| align="center" |5V
|模块电源正极引脚（接5V）
|Module power supply positive pin (connected to 5V)
|-
|-
| align="center" |7
| align="center" |7
| align="center" |GND
| align="center" |GND
|电源地
|Module power ground pin
|-
|-
| align="center" |8
| align="center" |8
| align="center" |GND
| align="center" |GND
|电源地
|Module power ground pin
|-
|-
| align="center" |9
| align="center" |9
| align="center" |NC
| align="center" |NC
|无定义，保留
|No definition, reserved
|-
|-
| align="center" |10
| align="center" |10
| align="center" |NC
| align="center" |NC
|无定义，保留
|No definition, reserved
|-
|-
| align="center" |11
| align="center" |11
| align="center" |TE
| align="center" |TE
|液晶屏撕裂效应信号引脚（只读）
|LCD tearing effect signal pin (read only)
|-
|-
| align="center" |12~27
| align="center" |12~27
| align="center" |D15~D0
| align="center" |D15~D0
|液晶屏16位数据总线引脚（8位模式下使用D0~D7）
|LCD 16 bit data bus pin (use d0 ~ D7 in 8-bit mode)
|-
|-
| align="center" |28
| align="center" |28
| align="center" |RST
| align="center" |RST
|液晶屏复位控制引脚（低电平复位）
|LCD reset control pin( low level reset)
|-
|-
| align="center" |29
| align="center" |29
| align="center" |RD
| align="center" |RD
|液晶屏读控制引脚
|LCD read control pin
|-
|-
| align="center" |30
| align="center" |30
| align="center" |WR
| align="center" |WR
|液晶屏写控制引脚
|LCD write control pin
|-
|-
| align="center" |31
| align="center" |31
| align="center" |RS
| align="center" |RS
|液晶屏寄存器/数据选择控制引脚（低电平：寄存器，高电平：数据）
|LCD register / data selection control pin(high level: register, low level: data)
|-
|-
| align="center" |32
| align="center" |32
| align="center" |CS
| align="center" |CS
|液晶屏片选控制引脚（低电平使能）
|LCD reset control pin( low level enable)
|-
|-
|}
|}


*'''ESP32开发板直插接口引脚说明'''
*'''ESP32 development board'''  '''in line interface pin description'''


{| class="wikitable" border="1" style="width: 600px; background-color: white;"
{| class="wikitable" border="1" style="width: 600px; background-color: white;"
|-
|-
| align="center" |序号
| align="center" |Number
| align="center" |引脚名称
| align="center" |Pin name
| align="center" |说明
| align="center" |Description
|-
|-
| align="center" |1
| align="center" |1
| align="center" |5V
| align="center" |5V
|电源输入引脚（接5V）
|power pin (connected to 5V)
|-
|-
| align="center" |2
| align="center" |2
| align="center" |LCD_RS
| align="center" |LCD_RS
|液晶屏寄存器/数据选择引脚（高电平：数据；低电平：寄存器）
|LCD register / data selection control pin(high level: register, low level: data)
|-
|-
| align="center" |3
| align="center" |3
| align="center" |LCD_RD
| align="center" |LCD_RD
|液晶屏读控制引脚
|LCD read control pin
|-
|-
| align="center" |4
| align="center" |4
| align="center" |LCD_D1
| align="center" |LCD_D1
|8位并口数据总线第2引脚
|Pin 2 of 8-bit parallel data bus
|-
|-
| align="center" |5
| align="center" |5
| align="center" |GND  
| align="center" |GND  
|电源地
|Power ground pin
|-
|-
| align="center" |6
| align="center" |6
| align="center" |LCD_WR
| align="center" |LCD_WR
|液晶屏写控制引脚
|LCD write control pin
|-
|-
| align="center" |7
| align="center" |7
| align="center" |LCD_D0
| align="center" |LCD_D0
|8位并口数据总线第1引脚
|Pin 1 of 8-bit parallel data bus
|-
|-
| align="center" |8
| align="center" |8
| align="center" |LCD_D5
| align="center" |LCD_D5
|8位并口数据总线第6引脚
|Pin 6 of 8-bit parallel data bus
|-
|-
| align="center" |9
| align="center" |9
| align="center" |LCD_D7
| align="center" |LCD_D7
|8位并口数据总线第8引脚
|Pin 8 of 8-bit parallel data bus
|-
|-
| align="center" |10
| align="center" |10
| align="center" |LCD_D4
| align="center" |LCD_D4
|8位并口数据总线第5引脚
|Pin 5 of 8-bit parallel data bus
|-
|-
| align="center" |11
| align="center" |11
| align="center" |LCD_D6
| align="center" |LCD_D6
|8位并口数据总线第7引脚
|Pin 7 of 8-bit parallel data bus
|-
|-
| align="center" |12
| align="center" |12
| align="center" |LCD_D2
| align="center" |LCD_D2
|8位并口数据总线第3引脚
|Pin 3 of 8-bit parallel data bus
|-
|-
| align="center" |13
| align="center" |13
| align="center" |TP_CLK
| align="center" |TP_CLK
|电容触摸屏IIC总线时钟控制引脚（电阻触摸屏SPI总线时钟控制引脚）
|IIC  bus clock control pin of capacitive touch screen(SPI  bus clock control pin of resistance touch screen)
|-
|-
| align="center" |14
| align="center" |14
| align="center" |LCD_D3
| align="center" |LCD_D3
|8位并口数据总线第4引脚
|Pin 4 of 8-bit parallel data bus
|-
|-
| align="center" |15
| align="center" |15
| align="center" |TP_MISO
| align="center" |TP_MISO
|电阻触摸屏SPI总线读数据引脚（电容触摸屏没使用）
|SPI  bus read data pin of resistance touch screen(capacitive  touch screen not used)
|-
|-
| align="center" |16
| align="center" |16
| align="center" |LCD_CS
| align="center" |LCD_CS
|液晶屏片选控制引脚（低电平使能）
|LCD chip select control pin
|-
|-
| align="center" |17
| align="center" |17
| align="center" |GND
| align="center" |GND
|电源地
|Power ground pin
|-
|-
| align="center" |18
| align="center" |18
| align="center" |LCD_RST
| align="center" |LCD_RST
|液晶屏复位控制引脚（低电平有效）
|LCD reset control pin
|-
|-
| align="center" |19
| align="center" |19
| align="center" |TP_PEN
| align="center" |TP_PEN
|触摸屏中断检测引脚（发生触摸时为低电平）
|Touch screen interrupt control pin
|-
|-
| align="center" |20
| align="center" |20
| align="center" |TE
| align="center" |TE
|撕裂效应信号引脚（只读）
|Tearing Effect Signal pin(read-only)
|-
|-
| align="center" |21
| align="center" |21
| align="center" |TP_CS
| align="center" |TP_CS
|电容触摸屏复位引脚（电阻触摸屏片选引脚）
|Capacitive  touch screen reset pin(resistance  touch screen chip selection pin)
|-
|-
| align="center" |22
| align="center" |22
| align="center" |TP_MOSI
| align="center" |TP_MOSI
|电容触摸屏IIC总线数据引脚（电阻触摸屏SPI总线写数据引脚）
|IIC  bus data pin of capacitive touch screen(resistance  touch screen SPI bus write data pin)
|-
|-
| align="center" |23
| align="center" |23
| align="center" |GND
| align="center" |GND
|电源地
|Power  ground pin
|-
|-
|}
|}

Revision as of 10:51, 8 January 2021

语言选择

Languages

➤中文
➤EN


Product Picture

Product Description

  • The ssd1963 control IC is On board
  • Support the direct connection of flexible cable and needle of STM32 development board
  • Support direct insertion of esp32 development board
  • Support direct connection of RGB display module flexible cable
  • Support 8-bit and 16 bit parallel bus transmission, transmission speed block
  • Provide rich STM32 platform and esp32 platform sample program
  • Military grade process standard, long-term stable work
  • Provide technical support for underlying driver

Product Parameters

Name Parameter
SKU SSD1963
Driver IC SSD1963
STM32 development board input interface 16 bit parallel port
Input interface of esp32 development board 8 bit parallel port
Output interface 24 bit RGB parallel port
Module PCB Size 50.00x77.00(mm)
Input Voltage 5V
IO Voltage 3.3V and 1.8V
Power Consumption 36mA
Rough Weight(Net weight) 22 (g)

Interface Definition

①--40pin flexible cable output interface
②④--In line interface of esp32 development board
③--STM32 development board 32pin flexible cable input interface
⑤--STM32 development board 34pin pin input interface
  • STM32 development board row pin input interface pin description
Number Pin name Description
1 CS LCD reset control pin( low level enable)
2 RS LCD register / data selection control pin(high level: register, low level: data)
3 WR LCD write control pin
4 RD LCD read control pin
5 RST LCD reset control pin( low level reset)
6~21 D0~D15 LCD 16 bit data bus pin (use d0 ~ D7 in 8-bit mode)
22 GND Module power ground pin
23 TE LCD tearing effect signal pin (read only)
24 NC No definition, reserved
25 NC No definition, reserved
26 GND Module power ground pin
27 GND Module power ground pin
28 5V Module power supply positive pin (connected to 5V)
29 TMI Resistance touch screen SPI bus read data pin (capacitor touch screen not used)
30 TMO IIC bus data pin of capacitive touch screen (SPI bus write data pin of resistance touch screen)
31 PEN Touch screen interrupt detection pin(Low level when a touch occurs)
32 NC No definition, reserved
33 TCS Capacitor touch screen reset pin (resistance touch screen chip selection pin)
34 TCK IIC bus clock pin of capacitive touch screen (SPI bus clock pin of resistance touch screen)
  • STM32 development board flexible cable input interface pin description
Number Pin name Description
1 TCK IIC bus clock pin of capacitive touch screen (SPI bus clock pin of resistance touch screen)
2 TCS Capacitor touch screen reset pin (resistance touch screen chip selection pin)
3 PEN Touch screen interrupt detection pin(Low level when a touch occurs)
4 TMO IIC bus data pin of capacitive touch screen (SPI bus write data pin of resistance touch screen)
5 TMI Resistance touch screen SPI bus read data pin (capacitor touch screen not used)
6 5V Module power supply positive pin (connected to 5V)
7 GND Module power ground pin
8 GND Module power ground pin
9 NC No definition, reserved
10 NC No definition, reserved
11 TE LCD tearing effect signal pin (read only)
12~27 D15~D0 LCD 16 bit data bus pin (use d0 ~ D7 in 8-bit mode)
28 RST LCD reset control pin( low level reset)
29 RD LCD read control pin
30 WR LCD write control pin
31 RS LCD register / data selection control pin(high level: register, low level: data)
32 CS LCD reset control pin( low level enable)
  • ESP32 development board in line interface pin description
Number Pin name Description
1 5V power pin (connected to 5V)
2 LCD_RS LCD register / data selection control pin(high level: register, low level: data)
3 LCD_RD LCD read control pin
4 LCD_D1 Pin 2 of 8-bit parallel data bus
5 GND Power ground pin
6 LCD_WR LCD write control pin
7 LCD_D0 Pin 1 of 8-bit parallel data bus
8 LCD_D5 Pin 6 of 8-bit parallel data bus
9 LCD_D7 Pin 8 of 8-bit parallel data bus
10 LCD_D4 Pin 5 of 8-bit parallel data bus
11 LCD_D6 Pin 7 of 8-bit parallel data bus
12 LCD_D2 Pin 3 of 8-bit parallel data bus
13 TP_CLK IIC bus clock control pin of capacitive touch screen(SPI bus clock control pin of resistance touch screen)
14 LCD_D3 Pin 4 of 8-bit parallel data bus
15 TP_MISO SPI bus read data pin of resistance touch screen(capacitive touch screen not used)
16 LCD_CS LCD chip select control pin
17 GND Power ground pin
18 LCD_RST LCD reset control pin
19 TP_PEN Touch screen interrupt control pin
20 TE Tearing Effect Signal pin(read-only)
21 TP_CS Capacitive touch screen reset pin(resistance touch screen chip selection pin)
22 TP_MOSI IIC bus data pin of capacitive touch screen(resistance touch screen SPI bus write data pin)
23 GND Power ground pin
  • 软排线输出接口引脚说明
序号 引脚名称 说明
1 VCC5 电源输入引脚（接5V）
2 VCC5 电源输入引脚（接5V）
3~10 R0~R7 8位RED数据引脚
11 GND 电源地
12~19 G0 ~ G7 8位GREEN数据引脚
20 GND 电源地
21~28 B0 ~ B7 8位BLUE数据引脚
29 GND 电源地
30 PCLK 像素时钟控制引脚
31 HSYNC 水平同步信号控制引脚
32 VSYNC 垂直同步信号控制引脚
33 DE 数据使能信号控制引脚
34 LCD_BL 液晶屏背光控制引脚
35 TP_CS 电容触摸屏复位引脚（电阻触摸屏片选引脚）
36 TP_MOSI 电容触摸屏IIC总线数据引脚（电阻触摸屏SPI总线写数据引脚）
37 TP_MISO 电阻触摸屏SPI总线读数据引脚（电容触摸屏没使用）
38 TP_CLK 电容触摸屏IIC总线时钟控制引脚（电阻触摸屏SPI总线时钟控制引脚）
39 TP_PEN 触摸屏中断控制引脚(产生触摸时，为低电平)
40 LCD_RST 液晶屏复位控制引脚（低电平有效）

How to Connect

Retrieved from "http://www.lcdwiki.com/index.php?title=SSD1963-RGB_Pinboard&oldid=3754"
Contents
Last modified
This page was last edited on 8 January 2021, at 10:51.