Difference between revisions of "5inch HDMI Display"
Line 32: | Line 32: | ||
* Dimensions: 121.11*77.93(mm) | * Dimensions: 121.11*77.93(mm) | ||
* Weight: 175(g) | * Weight: 175(g) | ||
− | |||
== <font color="blue">Hardware Description</font> == | == <font color="blue">Hardware Description</font> == | ||
Line 41: | Line 40: | ||
④ 13*2 Pin Socket:Get 5V Power from raspberry Pi to LCD, at the same time transfer touch signal back to raspberry Pi <br /> | ④ 13*2 Pin Socket:Get 5V Power from raspberry Pi to LCD, at the same time transfer touch signal back to raspberry Pi <br /> | ||
⑤ Extended interface:extended The ④-13*2 Pin Socket signal Pin-to-Pin <br /> | ⑤ Extended interface:extended The ④-13*2 Pin Socket signal Pin-to-Pin <br /> | ||
− | |||
− | |||
== <font color="blue">How to use with Raspbian/Ubuntu Mate/Win10 IoT Core System</font> == | == <font color="blue">How to use with Raspbian/Ubuntu Mate/Win10 IoT Core System</font> == | ||
=== '''Step 1, Install Raspbian official image''' === | === '''Step 1, Install Raspbian official image''' === | ||
Line 61: | Line 58: | ||
hdmi_cvt 800 480 60 6 0 0 0 | hdmi_cvt 800 480 60 6 0 0 0 | ||
</pre> | </pre> | ||
− | |||
==='''Step 3, Drive the 5inch HDMI Display-B with the Raspberry Pi'''=== | ==='''Step 3, Drive the 5inch HDMI Display-B with the Raspberry Pi'''=== | ||
Insert the TF Card to Raspberry Pi, connect the Raspberry Pi and LCD by HDMI cable; connect USB cable to one of the four USB ports of Raspberry Pi, and connect the other end of the USB cable to the USB port of the LCD; then supply power to Raspberry Pi; after that if the display and touch both are OK, it means drive successfully (please use the full 2A for power supply). | Insert the TF Card to Raspberry Pi, connect the Raspberry Pi and LCD by HDMI cable; connect USB cable to one of the four USB ports of Raspberry Pi, and connect the other end of the USB cable to the USB port of the LCD; then supply power to Raspberry Pi; after that if the display and touch both are OK, it means drive successfully (please use the full 2A for power supply). | ||
Line 73: | Line 69: | ||
== <font color="blue">How to rotate display direction and touch</font> == | == <font color="blue">How to rotate display direction and touch</font> == | ||
Wait for Upload | Wait for Upload | ||
− | |||
==<font color="blue"> Document/Video</font>== | ==<font color="blue"> Document/Video</font>== | ||
Line 79: | Line 74: | ||
*[http://www.lcdwiki.com/res/MPI5001/EN/How_to_install_the_LCD_driver_V1.2.pdf How_to_install_the_LCD_driver_V1.2] | *[http://www.lcdwiki.com/res/MPI5001/EN/How_to_install_the_LCD_driver_V1.2.pdf How_to_install_the_LCD_driver_V1.2] | ||
*[http://www.lcdwiki.com/res/MPI5001/EN/How_to_install_matchbox-keyboard(En).pdf How_to_install_matchbox-keyboard] | *[http://www.lcdwiki.com/res/MPI5001/EN/How_to_install_matchbox-keyboard(En).pdf How_to_install_matchbox-keyboard] | ||
− | |||
== <font color="blue">Driver download</font> == | == <font color="blue">Driver download</font> == | ||
− | |||
*Local download: [http://www.lcdwiki.com/res/RaspDriver/LCD-show.tar.gz LCD-show.tar.gz] | *Local download: [http://www.lcdwiki.com/res/RaspDriver/LCD-show.tar.gz LCD-show.tar.gz] | ||
Line 95: | Line 88: | ||
== <font color="blue">Software</font> == | == <font color="blue">Software</font> == | ||
− | |||
*[http://www.lcdwiki.com/res/software/Panasonic_SDFormatter.zip Panasonic SDFormatter] | *[http://www.lcdwiki.com/res/software/Panasonic_SDFormatter.zip Panasonic SDFormatter] | ||
*[http://www.lcdwiki.com/res/software/Win32DiskImager.zip Win32DiskImager] | *[http://www.lcdwiki.com/res/software/Win32DiskImager.zip Win32DiskImager] | ||
*[http://www.lcdwiki.com/res/software/putty.zip PuTTY] | *[http://www.lcdwiki.com/res/software/putty.zip PuTTY] | ||
− | |||
|-| | |-| | ||
FAQ= | FAQ= |
Revision as of 13:53, 29 May 2018
Product pictures
Product description
- 5’’ standard display, 800 × 480 resolution
- With resistive touch screen, support touch control
- support backlight control alone, the backlight can be turned off to save power
- supports standard HDMI interface input, compatible with and can be directly inserted with Raspberry Pi (3rd, 2nd, and 1st generation)
- can be used as general-purpose-use HDMI monitor, for example: connect with a computer HDMI as the sub-display (resolution need to be able to force output for 800 x480)
- used as a raspberry pie display that supports Raspbian, Ubuntu, Kodi, win10 IOT(resistive touch)
- work as a PC monitor, support XP,win7, win8, win10 system(do not support touch)
- CE, RoHS certification
Product Parameters
- Size: 5.0(inch)
- SKU: MPI5008
- Resolution: 800×480(dots)
- Touch: 4-wire resistive touch
- Dimensions: 121.11*77.93(mm)
- Weight: 175(g)
Hardware Description
524x524像素
① USB interface:Get 5V Power from USB, If ④-13*2 Pin Socket has been connected, that this USB interface can be No Connect
② HDMI interface:For HDMI transmission
③ Backlight Power switch:Controls the backlight turned on and off to save power
④ 13*2 Pin Socket:Get 5V Power from raspberry Pi to LCD, at the same time transfer touch signal back to raspberry Pi
⑤ Extended interface:extended The ④-13*2 Pin Socket signal Pin-to-Pin
How to use with Raspbian/Ubuntu Mate/Win10 IoT Core System
Step 1, Install Raspbian official image
- Download the latest image from the official download.
- Install the system according to the official tutorial steps.
Step 2, modify the “config.txt”
After the programming of Step1 is completed, open the config.txt file of TF card root directory and
max_usb_current=1 hdmi_force_hotplug=1 config_hdmi_boost=7 hdmi_group=2 hdmi_mode=1 hdmi_mode=87 hdmi_drive=1 hdmi_cvt 800 480 60 6 0 0 0
Step 3, Drive the 5inch HDMI Display-B with the Raspberry Pi
Insert the TF Card to Raspberry Pi, connect the Raspberry Pi and LCD by HDMI cable; connect USB cable to one of the four USB ports of Raspberry Pi, and connect the other end of the USB cable to the USB port of the LCD; then supply power to Raspberry Pi; after that if the display and touch both are OK, it means drive successfully (please use the full 2A for power supply).
How to use as PC monitor
- connect the computer HDMI output signal to the LCD HDMI interface by using the HDMI cable
- Connect the LCD's USB Touch interface (Either of the two MicroUSB) to the USB port of the device
- If there are several monitors, please unplug other monitor connectors first, and use LCD as the only monitor for testing.
How to rotate display direction and touch
Wait for Upload
Document/Video
Driver download
- Local download: LCD-show.tar.gz
- GitHub download: https://github.com/goodtft/LCD-show
Images download
If you feel that the previous step's modification configuration, installation driver is more difficult or still display exception.
Please use our pre-loaded image to download and write the image to the Micro SD card. Then insert the card into the raspberry pie.
- BaiduPan Download:Images Download
- Google Download:wait for Upload
Software
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contact us:
Tech Support:
Email: | Lcdwiki@163.com |
---|
Dear Customers:
There might be a delay of several hours in handling your question, depending on the time difference between your location and ours.
Sincerely hoping your understanding!