1.8inch Esplora TFT LCD: Difference between revisions

Revision as of 15:29, 6 July 2022

1.8-inch color screen,support 65K color display,display rich colors
128X160 resolution, clear display
Using the SPI serial bus, it only takes a few IOs to illuminate the display
With SD card slot for convenient function expansion
Support in-line Arduino esplora game controller
Provide underlying libraries and rich sample programs for Arduino, C51, and STM32 platforms
Military-grade process standards, long-term stable work
Provide underlying driver technical support

Name	Parameter
Display Color	16BIT RGB 65K color
SKU	MAR1805
Screen Size	1.8(inch)
Type	TFT
Driver IC	ST7735
Resolution	128*160 (Pixel)
Module Interface	4-wire SPI interface
Backlight	2 White Led
Active Area	28.03*35.04 (mm)
Module PCB Size	59.79*42.01 (mm)
Operating Temperature	-20℃~60℃
Storage Temperature	-30℃~70℃
Operating Voltage	5V/3.3V
Power Consumption	TBD
Rough Weight(Package containing)	25 (g)

Number	Pin Label	Description
1	GND	LCD Power positive (3.3V~5V)
2	BL	LCD Power ground
3	RESET	LCD Power ground
4	D/C-LD	Not defined, reserved
5	CS-SD	Not defined, reserved
6	CS-LD	Not defined, reserved
7	MOSI	LCD SPI bus clock signal
8	SCK	LCD SPI bus write data signal
9	MISO	LCD register / data selection signal, high level: register, low level: data
10	+5V	LCD reset signal, low level reset

@@ Line 79: / Line 79: @@
 |-
 | align="center" |1
-| align="center" |VCC
+| align="center" |GND
 |LCD Power positive (3.3V~5V)
 |-
 | align="center" |2
-| align="center" |GND
+| align="center" |BL
 |LCD Power ground
 |-
 | align="center" |3
-| align="center" |GND
+| align="center" |RESET
 |LCD Power ground
 |-
 | align="center" |4
-| align="center" |NC
+| align="center" |D/C-LD
 |Not defined, reserved
 |-
 | align="center" |5
-| align="center" |NC
+| align="center" |CS-SD
 |Not defined, reserved
 |-
 | align="center" |6
-| align="center" |NC
+| align="center" |CS-LD
 |Not defined, reserved
 |-
 | align="center" |7
-| align="center" |CLK
+| align="center" |MOSI
 |LCD SPI bus clock signal
 |-
 | align="center" |8
-| align="center" |SDA
+| align="center" |SCK
 |LCD SPI bus write data signal
 |-
 | align="center" |9
-| align="center" |RS
+| align="center" |MISO
 |LCD register / data selection signal,
 high level: register, low level: data
 |-
 | align="center" |10
-| align="center" |RST
+| align="center" | +5V
 |LCD reset signal, low level reset
-|-
-| align="center" |11
-| align="center" |CS
-|LCD chip select signal, low level enable
 |-
 |}