0.96inch IPS ST7789 Module: Difference between revisions

Revision as of 16:17, 27 September 2023

0.96inch color screen with 240x198 resolution of 65K colors and rich display colors
The upgrade adopts IPS full view panel, with good visual angle
On board level conversion circuit, compatible with 5V and 3.3V MCU
Adopting a 4-wire SPI serial bus to save I/O pins
Modules can be selected with or without glass cover plates
Unique circular display screen
Module input supports slot interfaces with a spacing of 1.25mm
Provide rich example learning programs (ESP32/STM32/Arduino UNO&Mage2560/C51/CH32/RaspberryPi)
Provide low-level driver technical support, and update WIKI information online
Multiple tests for module aging can meet military level standards, supporting long-term stable work

Name	Parameter
LCD Parameters
Screen Size	0 96inch
Screen Type	IPS
Resolution	240xRGBx198(pixels)
Active Area (AA area)	24.408(W)x20.137(H)(mm)
Number of Colors(Max)	65K
Driver IC	ST7789H2
Display Interface	4-Line SPI
Pixel Size	0.1017(H)x0.1017(V)(mm)
View Angle	ALL 0’CLOCK
Brightness(TYP)	300(cd/m²)
Backlight Type	White LED*2
Operation Temperature	-10~60(℃)
Storage Temperature	-20~70(℃)
Size Parameters
TFT Outline Size	27.4±0.2(W)x27.0±0.2(H)x1.31±0.15(D)(mm)(Excluding adhesive backing)
Module Outline Size	NO Glass Cover Plate:29.73(W)x28.14(H)x6.66(D)(mm)(Including positioning columns) Have Glass Cover Plate:31.88(W)x31.88(H)x9.65(D)(mm)(Including positioning columns)
Electrical Parameters
Working Voltage	5.0 V/3.3V
Backlight Current	40 mA
Power	0.09 W
Other Parameters
SKU	NO Glass Cover Plate: MSP0962 Have Glass Cover Plate: MSP0963
Interface	8P 1.25mm slot interface
Weight(including package)	MSP0962: 21g MSP0963: 25g

Number	Interface	Function Description
①	14 Pin Header	2.54mm spacing row pins, module signal input pins
②	Micro SD Slot	Insert a Micro SD card to expand storage space, such as storing big data content such as fonts and images
③	14P FPC	0.5mm FPC terminal, used for module signal input with the same function as ①

Number	Pin Label	Description
1	VCC	Power positive
2	GND	Power ground
3	LCD_CS	LCD selection control signal, Low level active
4	LCD_RST	LCD reset control signal, Low level reset
5	LCD_RS	LCD command / data selection control signal High level: data, low level: command
6	SDI(MOSI)	SPI bus write data signal(SD card and LCD screen used together)
7	SCK	SPI bus clock signal(SD card and LCD screen used together)
8	LED	LCD backlight control signal (If you need control, please connect the pins. If you don't need control, you can skip it)
9	SDO(MISO)	SPI bus read data signal (SD card and LCD screen used together)
10	CTP_SCL	Capacitive touch screen IIC bus clock signal (modules without touch screens do not need to be connected)
11	CTP_RST	Capacitor touch screen reset control signal, low-level reset (modules without touch screens do not need to be connected)
12	CTP_SDA	Capacitive touch screen IIC bus data signal (modules without touch screens do not need to be connected)
13	CTP_INT	Capacitor touch screen IIC bus touch interrupt signal, when generating touch, input low level to the main control (modules without touch screens do not need to be connected)
14	SD_CS	SD card selection control signal, low level active (without SD card function, can be disconnected)

@@ Line 106: / Line 106: @@
 ==<font color="blue">Interface Definition</font> ==
-[[File:MSP2833-4.jpg|750px]]
+[[File:MSP0963-3.png|450px]]
 *'''Interface Function Description'''