Toggle search
Toggle menu
14
832
7
5,040
LCD wiki
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

0.96inch IPS ST7789 Module: Difference between revisions

From LCD wiki
More actions
← Older editNewer edit →
VisualWikitext
Lin (talk | contribs)
2,030 edits
Lin (talk | contribs)
2,030 edits
Line 116: Line 116:
|-
|-
| align="center" |'''①'''
| align="center" |'''①'''
| align="center" |'''14 Pin Header'''
| align="center" |'''8P slot'''
|2.54mm spacing row pins, module signal input pins
|1.25mm spacing slot, module signal input pins
|-
| align="center" |'''②'''
| align="center" |'''Micro SD Slot'''
|Insert a Micro SD card to expand storage space, such as storing big data content such as fonts and images
|-
| align="center" |'''③'''
| align="center" |'''14P FPC'''
|0.5mm FPC terminal, used for module signal input with the same function as ①
|}
|}


Line 136: Line 128:
|-
|-
| align="center" |1
| align="center" |1
| align="center" |'''VCC'''
| align="center" |'''GNDVCC'''
|Power positive
|LCD Power ground
|-
|-
| align="center" |2
| align="center" |2
| align="center" |'''GND'''
| align="center" |'''VCC'''
|Power ground
|LCD power positive(It is recommended to connect to 5V. When connected to 3.3V, the backlight brightness will be slightly dim)
|-
|-
| align="center" |3
| align="center" |3
| align="center" |'''LCD_CS'''
| align="center" |'''CL'''
|LCD selection control signal, Low level active
|LCD SPI bus clock signal
|-
|-
| align="center" |4
| align="center" |4
| align="center" |'''LCD_RST'''
| align="center" |'''SDA'''
|LCD SPI bus write data signal
|-
| align="center" |5
| align="center" |'''RES'''
|LCD reset control signal, Low level reset
|LCD reset control signal, Low level reset
|-
|-
| align="center" |5
| align="center" |6
| align="center" |'''LCD_RS'''
| align="center" |'''DC'''
|LCD command / data selection control signal
|LCD command / data selection control signal
High level: data, low level: command
High level: data, low level: command
|-
| align="center" |6
| align="center" |'''SDI(MOSI)'''
|SPI bus write data signal(SD card and LCD screen  used together)
|-
|-
| align="center" |7
| align="center" |7
| align="center" |'''SCK'''
| align="center" |'''CS'''
|SPI bus clock signal(SD card and LCD screen used  together)
|LCD selection control signal, Low level active
|-
|-
| align="center" |8
| align="center" |8
| align="center" |'''LED'''
| align="center" |'''BLK'''
|LCD backlight control signal (If you need control, please connect the pins. If you don't need control, you can skip it)
|LCD backlight control signal (If you need control, please connect the pins. If you don't need control, you can skip it)
|-
| align="center" |9
| align="center" |'''SDO(MISO)'''
|SPI bus read data signal (SD card and LCD screen used together)
|-
| align="center" |10
| align="center" |'''CTP_SCL'''
|Capacitive  touch screen IIC bus clock signal (modules without touch screens do not need  to be connected)
|-
| align="center" |11
| align="center" |'''CTP_RST'''
|Capacitor  touch screen reset control signal, low-level reset (modules without touch  screens do not need to be connected)
|-
| align="center" |12
| align="center" |'''CTP_SDA'''
|Capacitive  touch screen IIC bus data signal (modules without touch screens do not need  to be connected)
|-
| align="center" |13
| align="center" |'''CTP_INT'''
|Capacitor  touch screen IIC bus touch interrupt signal, when generating touch, input low  level to the main control (modules without touch screens do not need to be  connected)
|-
| align="center" |14
| align="center" |'''SD_CS'''
|SD card selection control  signal, low level active  (without SD card function, can be disconnected)
|-
|-
|}
|}

Revision as of 16:22, 27 September 2023

语言选择

Languages

➤中文
➤EN


Product Picture

Product Description

  • 0.96inch color screen with 240x198 resolution of 65K colors and rich display colors
  • The upgrade adopts IPS full view panel, with good visual angle
  • On board level conversion circuit, compatible with 5V and 3.3V MCU
  • Adopting a 4-wire SPI serial bus to save I/O pins
  • Modules can be selected with or without glass cover plates
  • Unique circular display screen
  • Module input supports slot interfaces with a spacing of 1.25mm
  • Provide rich example learning programs (ESP32/STM32/Arduino UNO&Mage2560/C51/CH32/RaspberryPi)
  • Provide low-level driver technical support, and update WIKI information online
  • Multiple tests for module aging can meet military level standards, supporting long-term stable work

Product Parameters

Name Parameter
LCD Parameters
Screen Size 0 96inch
Screen Type IPS
Resolution 240xRGBx198(pixels)
Active Area (AA area) 24.408(W)x20.137(H)(mm)
Number of Colors(Max) 65K
Driver IC ST7789H2
Display Interface 4-Line SPI
Pixel Size 0.1017(H)x0.1017(V)(mm)
View Angle ALL 0’CLOCK
Brightness(TYP) 300(cd/m2)
Backlight Type White LED*2
Operation Temperature -10~60(℃)
Storage Temperature -20~70(℃)
Size Parameters
TFT Outline Size 27.4±0.2(W)x27.0±0.2(H)x1.31±0.15(D)(mm)(Excluding adhesive backing)
Module Outline Size NO Glass Cover Plate:29.73(W)x28.14(H)x6.66(D)(mm)(Including positioning columns)

Have Glass Cover Plate:31.88(W)x31.88(H)x9.65(D)(mm)(Including positioning columns)

Electrical Parameters
Working Voltage 5.0 V/3.3V
Backlight Current 40 mA
Power 0.09 W
Other Parameters
SKU NO Glass Cover Plate: MSP0962

Have Glass Cover Plate: MSP0963

Interface 8P 1.25mm slot interface
Weight(including package) MSP0962: 21g

MSP0963: 25g

Interface Definition

  • Interface Function Description
Number Interface Function Description
① 8P slot 1.25mm spacing slot, module signal input pins
  • Pin Function Description
Number Pin Label Description
1 GNDVCC LCD Power ground
2 VCC LCD power positive(It is recommended to connect to 5V. When connected to 3.3V, the backlight brightness will be slightly dim)
3 CL LCD SPI bus clock signal
4 SDA LCD SPI bus write data signal
5 RES LCD reset control signal, Low level reset
6 DC LCD command / data selection control signal

High level: data, low level: command

7 CS LCD selection control signal, Low level active
8 BLK LCD backlight control signal (If you need control, please connect the pins. If you don't need control, you can skip it)

Product Documentation

Program Download

Reference Materials

Common Software

BACK TO TOP

Retrieved from "http://www.lcdwiki.com/index.php?title=0.96inch_IPS_ST7789_Module&oldid=4611"
Contents
Last modified
This page was last edited on 27 September 2023, at 16:22.