More actions
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
== <font color="blue"> | {{lan | ||
=== | | | ||
cn=http://www.lcdwiki.com/zh/3.5inch_HDMI_Display-B | |||
=== | | | ||
en=http://www.lcdwiki.com/3.5inch_HDMI_Display-B | |||
}} | |||
<tabber> | |||
产品说明= | |||
== <font color="blue">产品图片</font>== | |||
[[File:MPI3508-03.jpg|300px]] | |||
[[File:MPI3508-01.jpg|300px]] | |||
== <font color="blue">产品介绍</font>== | |||
* 3.5inch标准显示器,支持HDMI输入,刷新率60FPS以上 | |||
* 物理分辨率480x320,可配置软件分辨率高达1920x1080 | |||
* 可用作树莓派显示器,带触摸控制功能(需安装触摸驱动) | |||
* 可用作电脑显示器、电视盒子、PSP等标准HDMI输出设备(无触摸功能) | |||
* 兼容并可直接插入所有版本树莓派主板(树莓派1代B型和Zero需另配HDMI线) | |||
* 支持HDMI音频输出,背光亮度可调节 | |||
== <font color="blue">产品参数</font> == | |||
* 尺寸:3.5(inch) | |||
* SKU: MPI3508 | |||
* 物理分辨率:480×320(dots) | |||
* 软件可调分辨率:480×320~1920×1080(dots) | |||
* 触摸:电阻触摸屏 | |||
* USB输入电源:5V 1A | |||
* 功耗:940mW (亮度80%) | |||
* 510mW (背光关闭) | |||
* 外形尺寸:85.5*60.6(mm) | |||
* 产品重量:净重55(g),毛重145(g) | |||
== | == <font color="blue">硬件说明</font> == | ||
<font color=" | [[文件:MPI3508-04.png|无框|472x472像素]] | ||
<br /><big>①</big>背光按键:背光亮度调节按键,短按背光变化10%,长按3秒关闭背光 | |||
''' | <big>②</big>HDMI接口: HDMI信号输入接口 | ||
<big>③</big>耳机接口: HDMI音频输出接口 | |||
<big>④</big>USB供电接口:用作普通显示器使用时提供电源(5V 1A) | |||
<big>⑤</big>树莓派26PIN母座:用作树莓派显示器时从此处获取电源和返回触摸 | |||
== <font color="blue">在树莓派Raspbian/Ubuntu Mate/Win10 IoT Core系统中使用</font> == | |||
<div style="border:#A7D7F9 2px solid;background:white; padding: 20px 1em;"> | |||
<big>'''方法一:快速安装(树莓派需连接互联网)'''</big> | |||
* '''步骤1,安装官方镜像''' | |||
# 从官方下载最新镜像 | |||
# 按官方教程步骤安装好系统 | |||
* '''步骤2,安装LCD驱动 '''<br /> 1)用Putty连接登陆树莓派系统到用户命令行(初始用户名:pi 密码:raspberry) <br /> 2)执行以下命令(复制后在Putty窗口中单击鼠标右键即可粘贴): | |||
{{code|1= | {{code|1= | ||
git clone https://github.com/goodtft/LCD-show.git | git clone https://github.com/goodtft/LCD-show.git | ||
chmod -R 755 LCD-show | chmod -R 755 LCD-show | ||
cd LCD-show/ | cd LCD-show/ | ||
sudo ./MPI3508-show }} | |||
*执行完上述命令后,系统会自动重启,重启就能正常显示和触摸了 | |||
</div> | |||
'''<big>方法二:离线安装</big>''' <br /> | |||
*安装视频: | |||
::{{#ev:youku|XMzcwMTg5MjA4OA}} | |||
* '''步骤1,安装Raspbian/Ubuntu官方镜像''' | |||
:1)从官方下载最新Raspbian或Ubuntu镜像 https://www.raspberrypi.org/downloads/ | |||
:2)使用SDFormatter格式化TF卡, | |||
:3)使用Win32DiskImager把官方镜像烧录到TF卡。 | |||
* '''步骤2,修改config配置文件''' | |||
:步骤1烧写完成后,将光盘内Driver文件夹中的”[http://www.lcdwiki.com/res/RaspDriver/LCD-show.tar.gz LCD-show.tar.gz]”拷贝到TF卡根目录, | |||
:打开TF卡根目录的config.txt文件并在文件末端加入以下代码,保存并安全弹出TF卡: | |||
{{code|1= | |||
hdmi_force_hotplug=1 | |||
config_hdmi_boost=7 | |||
hdmi_drive=2 | |||
hdmi_force_hotplug=1 | |||
hdmi_group=2 | |||
hdmi_mode=87 | |||
hdmi_cvt 480 320 60 6 0 0 0 | |||
}} | |||
* '''步骤3,将SD卡插入树莓派,按照图片所示连接硬件:''' | |||
[[文件:MPI3508-05.png|无框|476x476像素]] | |||
* '''步骤4,给树莓派上电,接上鼠标键盘,打开树莓派上的terminal终端:''' | |||
[[文件:MPI3508-06.png|无框|483x483像素]] | |||
* '''步骤5,在terminal终端中输入如下指令:''' | |||
{{code|1= | |||
cd /boot | |||
cp LCD-show.tar.gz ~ | |||
cd ~ | |||
sudo tar zxvf LCD-show.tar.gz | |||
cd LCD-show/ | |||
sudo ./MPI3508-show | sudo ./MPI3508-show | ||
}} | }} | ||
== <font color="blue">如何作为普通显示器使用</font> == | |||
:使用HDMI连接线将电脑HDMI输出信号连接至LCD的HDMI接口; | |||
:将Micro USB连接线一端连接LCD的USB供电接口,另一端连接至电脑的USB端口。 | |||
:如有多个显示器,请先拔掉其他显示器接口,将本LCD作为唯一显示器进行测试。 | |||
:注: 触摸功能只能接树莓派使用。 | |||
== <font color="blue">如何旋转显示和触摸 </font>== | |||
* [[如何旋转显示和触摸(电容触摸)]] | |||
==<font color="blue"> 资源下载</font>== | |||
*'''文档''' | |||
# [http://www.lcdwiki.com/zh/%E5%A6%82%E4%BD%95%E5%AE%89%E8%A3%85LCD%E9%A9%B1%E5%8A%A8(CN) 如何安装LCD驱动(CN)] | |||
#[http://www.lcdwiki.com/zh/%E5%A6%82%E4%BD%95%E5%AE%89%E8%A3%85%E8%99%9A%E6%8B%9F%E9%94%AE%E7%9B%98(CN) 如何安装虚拟键盘(CN)] | |||
# 产品尺寸图:[[:文件:MPI3508-07.PNG]] | |||
*'''驱动下载''' | |||
# 本地下载:[http://www.lcdwiki.com/res/RaspDriver/LCD-show.tar.gz LCD-show.tar.gz] | |||
*'''镜像下载''' | |||
:如果你觉得前面步骤的修改配置、安装驱动都比较困难或者仍然显示异常,请先使用我们预装好驱动的镜像, | |||
:下载后解压并把镜像写入到TF卡中。然后把卡插入树莓派就可以使用了。 | |||
{| class="wikitable" border="1" style="width: 80%; margin-left:1.5%;background-color: white;" | |||
!Image Name | |||
!Version | |||
!Support | |||
!Password | |||
! colspan="2" |Download | |||
|- | |||
| rowspan="2" |Raspbian(480X320) | |||
| rowspan="2" |2018-04-18 | |||
| rowspan="2" |PI3B+/A/A+/B/B+/PI2/ | |||
PI3/ZERO/ZERO W | |||
| rowspan="2" |user:pi | |||
password:raspberry | |||
|(addr1)Baidu Pan: | |||
|[https://pan.baidu.com/s/1a2fgh43JmJjkr0UGZsMRaw raspbian_180418_MPI3508_480320.7z] | |||
|- | |||
|(addr2)Mega: | |||
|[https://mega.nz/#!jbYnRACT!MrKnSGr4yzdP0Th1a1wTqE0EXGq352ejZRb6Ax-jqvw raspbian_180418_MPI3508_480320.7z] | |||
|- | |||
| rowspan="2" |Raspbian(800X480) | |||
| rowspan="2" |2018-04-18 | |||
| rowspan="2" |PI3B+/A/A+/B/B+/PI2/ | |||
PI3/ZERO/ZERO W | |||
| rowspan="2" |user:pi | |||
password:raspberry | |||
|(addr1)Baidu Pan: | |||
|[https://pan.baidu.com/s/1wphIR2w0boPX8t5jT63Yjg raspbian_180418_MPI3508_800480.7z] | |||
|- | |||
|(addr2)Mega: | |||
|[https://mega.nz/#!7LZTlYIR!uEZPFwi_NHOcb5C3cgwx49BlE_Ac-UPNmGROulgbCws raspbian_180418_MPI3508_800480.7z] | |||
|- | |||
| rowspan="2" |Ubuntu | |||
| rowspan="2" |Mate:16.04 | |||
| rowspan="2" |PI3,PI2 | |||
| rowspan="2" |user:pi | |||
password:raspberry | |||
|(addr1)Baidu Pan: | |||
|[https://pan.baidu.com/s/1zCeAajBPMkI30VDM_kRYNw UbuntuMate_16.04Beta2_MPI3508_600400.7z] | |||
|- | |||
|(addr2)Mega: | |||
|[https://mega.nz/#!SSJjkYZY!-G8hJjMUCGSVRTFgyHkuYJRqoTWLho0H6JxoFE8OV0U UbuntuMate_16.04Beta2_MPI3508_600400.7z] | |||
|- | |||
| rowspan="2" |Kali-linux | |||
| rowspan="2" |2017.2 | |||
| rowspan="2" |PI3,PI2 | |||
| rowspan="2" |user:root | |||
password:toor | |||
|(addr1)Baidu Pan: | |||
|[https://pan.baidu.com/s/1KYcTrqk4md1wXY6lfcsOvA Kali_17.02_MPI3508_480320.7z] | |||
|- | |||
|(addr2)Mega: | |||
|[https://mega.nz/#!jDRnSY4Z!ZhVXek9Jd5etjUXwexH1W2uqg_Mz0WJcwziqPPdDbmo Kali_17.02_MPI3508_480320.7z] | |||
|} | |||
* '''常用软件''' | |||
# [http://www.lcdwiki.com/res/software/Panasonic_SDFormatter.zip Panasonic SDFormatter] | |||
# [http://www.lcdwiki.com/res/software/Win32DiskImager.zip Win32DiskImager] | |||
# [http://www.lcdwiki.com/res/software/putty.zip PuTTY] | |||
[[#top|BACK TO TOP]] | |||
|-| | |||
常见问答=<table class="a-r at-c roundy bgd-blue bl-white" style="margin-left: 5px; margin-bottom: 5px;"> <table style="margin-top: 10px; border-right: 20px solid transparent; border-top: 20px solid #008DE6;"><table style="margin-top: 10px; border-right: 20px solid transparent; border-top: 20px solid #008DE6;"> | |||
<tr> | |||
<td> | |||
<table class="roundy" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #008DE6;"> | |||
<tr> | |||
<td><font color="#FFF"> <big><big> | |||
问题:使用光盘/网盘提供的树莓派镜像,无法正常使用LCD,怎么处理? | |||
</big></big></font> | |||
</td></tr></table> | |||
</td></tr></table> | |||
<table style="margin-top: 10px; border-left: 20px solid transparent; border-top: 20px solid #DDD;"> | |||
<tr> | |||
<td> | |||
<table class="roundy mw-collapsible" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #DDD;"> | |||
<tr> | |||
<td><font color="#008DE6"> <b><big>答复:</big></b></font><br /> | |||
</td></tr> | |||
<tr> | |||
<td> | |||
<ul><li>确定硬件连接无误且接触良好 | |||
</li><li>确定Micro SD卡烧写正常,系统启动是否正常。 | |||
</li><li>树莓派正常启动时PWR灯常亮,ACT灯闪烁。 | |||
</li><li>如果发现两灯都常亮则可能是Micro SD卡烧写镜像不成功或Micro SD卡与树莓派接触不良。 | |||
</li><li>推荐使用5V 2A电源适配器对树莓派进行供电。 如使用电脑USB接口供电,可能由于供电不足导致树莓派无法正常启动。 | |||
</li> | |||
</ul> | |||
</td></tr></table> | |||
</td></tr></table> | |||
<br /> | |||
== <font color=" | <table style="margin-top: 10px; border-right: 20px solid transparent; border-top: 20px solid #008DE6;"> | ||
<tr> | |||
<td> | |||
<table class="roundy" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #008DE6;"> | |||
<tr> | |||
<td><font color="#FFF"> <b><big><big>问题:</big></big></b></font><font color="#EEE"><big>使用树莓派官方提供的镜像, LCD无显示是什么原因? | |||
</big></font> | |||
</td></tr></table> | |||
</td></tr></table> | |||
<table style="margin-top: 10px; border-left: 20px solid transparent; border-top: 20px solid #DDD;"> | |||
<tr> | |||
<td> | |||
<table class="roundy mw-collapsible" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #DDD;"> | |||
<tr> | |||
<td><font color="#008DE6"> <b><big>答复:</big></b></font><br /> | |||
</td></tr> | |||
<tr> | |||
<td> | |||
<ul><li>LCD需要安装驱动才能正确显示,具体请参考”如何安装LCD驱动”相关说明文档, | |||
</li><li>建议先使用我们提供的镜像,测试通过后,再自行安装驱动程序。 | |||
</li></ul> | |||
</td></tr></table> | |||
</td></tr></table> | |||
<br /> | |||
<table style="margin-top: 10px; border-right: 20px solid transparent; border-top: 20px solid #008DE6;"> | |||
<tr> | |||
<td> | |||
<table class="roundy" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #008DE6;"> | |||
<tr> | |||
<td><font color="#FFF"> <b><big><big>问题:</big></big></b></font><font color="#EEE"><big>装好驱动后如想切换回传统显示器进行显示,如何操作? | |||
</big></font> | |||
</td></tr></table> | |||
</td></tr></table> | |||
<table style="margin-top: 10px; border-left: 20px solid transparent; border-top: 20px solid #DDD;"> | |||
<tr> | |||
<td> | |||
<table class="roundy mw-collapsible" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #DDD;"> | |||
<tr> | |||
<td><font color="#008DE6"> <b><big>答复:</big></b></font><br /> | |||
</td></tr> | |||
<tr> | |||
<td> | |||
<ul><li>请参考”如何安装LCD驱动”相关说明文档,使用以下命令切换: | |||
{{code|1= | |||
sudo ./LCD-hdmi | |||
}} | |||
</li></ul> | |||
</td></tr></table> | |||
</td></tr></table> | |||
<br /> | |||
== <font color=" | <table style="margin-top: 10px; border-right: 20px solid transparent; border-top: 20px solid #008DE6;"> | ||
<tr> | |||
<td> | |||
<table class="roundy" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #008DE6;"> | |||
<tr> | |||
<td><font color="#FFF"> <b><big><big>问题:</big></big></b></font><font color="#EEE"><big>使用7寸HDMI屏时显示正常但无触摸功能,如何处理? | |||
</big></font> | |||
</td></tr></table> | |||
</td></tr></table> | |||
<table style="margin-top: 10px; border-left: 20px solid transparent; border-top: 20px solid #DDD;"> | |||
<tr> | |||
<td> | |||
<table class="roundy mw-collapsible" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #DDD;"> | |||
<tr> | |||
<td><font color="#008DE6"> <b><big>答复:</big></b></font><br /> | |||
</td></tr> | |||
<tr> | |||
<td> | |||
<ul><li>检查触摸排线接插处是否运输松动 | |||
</li><li>检查USB一端是否连接树莓派4个USB口中任意一个,另一端连接到液晶屏的USB Touch接口. | |||
</li><li>可先将USB触摸连接到电脑USB口,观察是否能正常被电脑识别并正常触摸,以此可以判断触摸功能好坏, | |||
</li></ul> | |||
</td></tr></table> | |||
</td></tr></table> | |||
<br /> | |||
<table style="margin-top: 10px; border-right: 20px solid transparent; border-top: 20px solid #008DE6;"> | |||
<tr> | |||
<td> | |||
<table class="roundy" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #008DE6;"> | |||
<tr> | |||
<td><font color="#FFF"> <b><big><big>问题:</big></big></b></font><font color="#EEE"><big>问题:更新升级镜像之后无法使用? | |||
</big></font> | |||
</td></tr></table> | |||
</td></tr></table> | |||
<table style="margin-top: 10px; border-left: 20px solid transparent; border-top: 20px solid #DDD;"> | |||
<tr> | |||
<td> | |||
<table class="roundy mw-collapsible" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #DDD;"> | |||
<tr> | |||
<td><font color="#008DE6"> <b><big>答复:</big></b></font><br /> | |||
</td></tr> | |||
<tr> | |||
<td> | |||
<ul><li>更新需按照以下方式进行,否则可能导致镜像无法运行: | |||
<pre style="border: 1px dashed black;color:black"> | |||
sudo apt-mark hold raspberrypi-bootloader | |||
sudo apt-get update | |||
sudo apt-get upgrade | |||
</pre> | |||
</li></ul> | |||
</td></tr></table> | |||
</td></tr></table> | |||
<br /> | |||
<table style="margin-top: 10px; border-right: 20px solid transparent; border-top: 20px solid #008DE6;"> | |||
<tr> | |||
<td> | |||
<table class="roundy" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #008DE6;"> | |||
<tr> | |||
<td><font color="#FFF"> <b><big><big>问题:</big></big></b></font><font color="#EEE"><big>5寸和7寸屏连接到电脑HDMI,无法正常显示,怎么解决? | |||
</big></font> | |||
</td></tr></table> | |||
</td></tr></table> | |||
<table style="margin-top: 10px; border-left: 20px solid transparent; border-top: 20px solid #DDD;"> | |||
<tr> | |||
<td> | |||
<table class="roundy mw-collapsible" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #DDD;"> | |||
<tr> | |||
<td><font color="#008DE6"> <b><big>答复:</big></b></font><br /> | |||
</td></tr> | |||
<tr> | |||
<td> | |||
<ul><li>确定电脑的HDMI接口可以正常输出 | |||
</li><li>电脑只连接LCD作为显示设备,不连接其它的显示器(拔掉其他显示器)。 | |||
</li><li>先接USB供电线再接HDMI线。 | |||
</li><li>尝试重启电脑。 | |||
</li><li>必须使用windows操作系统。 | |||
</li></ul> | |||
</td></tr></table> | |||
</td></tr></table> | |||
<br /> | |||
<table style="margin-top: 10px; border-right: 20px solid transparent; border-top: 20px solid #008DE6;"> | |||
<tr> | |||
<td> | |||
<table class="roundy" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #008DE6;"> | |||
<tr> | |||
<td><font color="#FFF"> <b><big><big>问题:</big></big></b></font><font color="#EEE"><big>在树莓派3代上,怎么打开蓝牙功能? | |||
</big></font> | |||
</td></tr></table> | |||
</td></tr></table> | |||
<table style="margin-top: 10px; border-left: 20px solid transparent; border-top: 20px solid #DDD;"> | |||
<tr> | |||
<td> | |||
<table class="roundy mw-collapsible" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #DDD;"> | |||
<tr> | |||
<td><font color="#008DE6"> <b><big>答复:</big></b></font><br /> | |||
</td></tr> | |||
<tr> | |||
<td> | |||
<ul><li>方法1:升级到树莓派官方最新镜像(2016-05-27-jessie之后版本已经默认打开蓝牙功能); | |||
</li><li>方法2:手动打开蓝牙功能<br /> | |||
{{code|1= | |||
sudo apt-get install pi-bluetooth | |||
sudo apt-get install bluetooth bluez blueman | |||
systemctl status bluetooth | |||
sudo systemctl start bluetooth | |||
sudo reboot | |||
}} | |||
</li></ul> | |||
</td></tr></table> | |||
</td></tr></table> | |||
<br /> | |||
== <font color=" | <table style="margin-top: 10px; border-right: 20px solid transparent; border-top: 20px solid #008DE6;"> | ||
<tr> | |||
<td> | |||
<table class="roundy" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #008DE6;"> | |||
<tr> | |||
<td><font color="#FFF"> <b><big><big>问题:</big></big></b></font><font color="#EEE"><big>使用5寸7寸HDMI屏时无法全屏或显示残缺,如何处理? | |||
</big></font> | |||
</td></tr></table> | |||
</td></tr></table> | |||
<table style="margin-top: 10px; border-left: 20px solid transparent; border-top: 20px solid #DDD;"> | |||
<tr> | |||
<td> | |||
<table class="roundy mw-collapsible" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #DDD;"> | |||
<tr> | |||
<td><font color="#008DE6"> <b><big>答复:</big></b></font><br /> | |||
</td></tr> | |||
<tr> | |||
<td> | |||
<ul><li>检查HDMI是否已经插好并且输出正常 | |||
</li><li>打开SD卡根目录下config.txt文件,检查HDMI配置是否正确 | |||
</li><li>5寸和7寸800*480应配置为如下参数:<br /> | |||
<pre style="border: 1px dashed black;color:black;width:80%"> | |||
hdmi_group=2 | |||
hdmi_mode=1 | |||
hdmi_mode=87 | |||
hdmi_cvt 800 480 60 6 0 0 0 | |||
</pre> | |||
</li><li>7寸1024*600高清应配置为:<br /> | |||
<pre style="border: 1px dashed black;color:black;width:80%"> | |||
hdmi_group=2 | |||
hdmi_mode=1 | |||
hdmi_mode=87 | |||
hdmi_cvt 1024 600 60 6 0 0 0 | |||
</pre> | |||
</li></ul> | |||
</td></tr></table> | |||
</td></tr></table> | |||
<br /> | |||
|-| | |||
售后= | |||
{{contact_us}} | |||
</tabber> |
Revision as of 18:19, 3 July 2018
<tabber>
产品说明=
产品图片
产品介绍
- 3.5inch标准显示器,支持HDMI输入,刷新率60FPS以上
- 物理分辨率480x320,可配置软件分辨率高达1920x1080
- 可用作树莓派显示器,带触摸控制功能(需安装触摸驱动)
- 可用作电脑显示器、电视盒子、PSP等标准HDMI输出设备(无触摸功能)
- 兼容并可直接插入所有版本树莓派主板(树莓派1代B型和Zero需另配HDMI线)
- 支持HDMI音频输出,背光亮度可调节
产品参数
- 尺寸:3.5(inch)
- SKU: MPI3508
- 物理分辨率:480×320(dots)
- 软件可调分辨率:480×320~1920×1080(dots)
- 触摸:电阻触摸屏
- USB输入电源:5V 1A
- 功耗:940mW (亮度80%)
- 510mW (背光关闭)
- 外形尺寸:85.5*60.6(mm)
- 产品重量:净重55(g),毛重145(g)
硬件说明
无框|472x472像素
①背光按键:背光亮度调节按键,短按背光变化10%,长按3秒关闭背光
②HDMI接口: HDMI信号输入接口
③耳机接口: HDMI音频输出接口
④USB供电接口:用作普通显示器使用时提供电源(5V 1A)
⑤树莓派26PIN母座:用作树莓派显示器时从此处获取电源和返回触摸
在树莓派Raspbian/Ubuntu Mate/Win10 IoT Core系统中使用
方法一:快速安装(树莓派需连接互联网)
- 步骤1,安装官方镜像
- 从官方下载最新镜像
- 按官方教程步骤安装好系统
- 步骤2,安装LCD驱动
1)用Putty连接登陆树莓派系统到用户命令行(初始用户名:pi 密码:raspberry)
2)执行以下命令(复制后在Putty窗口中单击鼠标右键即可粘贴):
git clone https://github.com/goodtft/LCD-show.git chmod -R 755 LCD-show cd LCD-show/ sudo ./MPI3508-show
- 执行完上述命令后,系统会自动重启,重启就能正常显示和触摸了
方法二:离线安装
- 安装视频:
- VideoService "youku" not recognized.
- 步骤1,安装Raspbian/Ubuntu官方镜像
- 1)从官方下载最新Raspbian或Ubuntu镜像 https://www.raspberrypi.org/downloads/
- 2)使用SDFormatter格式化TF卡,
- 3)使用Win32DiskImager把官方镜像烧录到TF卡。
- 步骤2,修改config配置文件
- 步骤1烧写完成后,将光盘内Driver文件夹中的”LCD-show.tar.gz”拷贝到TF卡根目录,
- 打开TF卡根目录的config.txt文件并在文件末端加入以下代码,保存并安全弹出TF卡:
hdmi_force_hotplug=1 config_hdmi_boost=7 hdmi_drive=2 hdmi_force_hotplug=1 hdmi_group=2 hdmi_mode=87 hdmi_cvt 480 320 60 6 0 0 0
- 步骤3,将SD卡插入树莓派,按照图片所示连接硬件:
- 步骤4,给树莓派上电,接上鼠标键盘,打开树莓派上的terminal终端:
- 步骤5,在terminal终端中输入如下指令:
cd /boot cp LCD-show.tar.gz ~ cd ~ sudo tar zxvf LCD-show.tar.gz cd LCD-show/ sudo ./MPI3508-show
如何作为普通显示器使用
- 使用HDMI连接线将电脑HDMI输出信号连接至LCD的HDMI接口;
- 将Micro USB连接线一端连接LCD的USB供电接口,另一端连接至电脑的USB端口。
- 如有多个显示器,请先拔掉其他显示器接口,将本LCD作为唯一显示器进行测试。
- 注: 触摸功能只能接树莓派使用。
如何旋转显示和触摸
资源下载
- 文档
- 驱动下载
- 本地下载:LCD-show.tar.gz
- 镜像下载
- 如果你觉得前面步骤的修改配置、安装驱动都比较困难或者仍然显示异常,请先使用我们预装好驱动的镜像,
- 下载后解压并把镜像写入到TF卡中。然后把卡插入树莓派就可以使用了。
Image Name | Version | Support | Password | Download | |
---|---|---|---|---|---|
Raspbian(480X320) | 2018-04-18 | PI3B+/A/A+/B/B+/PI2/
PI3/ZERO/ZERO W |
user:pi
password:raspberry |
(addr1)Baidu Pan: | raspbian_180418_MPI3508_480320.7z |
(addr2)Mega: | raspbian_180418_MPI3508_480320.7z | ||||
Raspbian(800X480) | 2018-04-18 | PI3B+/A/A+/B/B+/PI2/
PI3/ZERO/ZERO W |
user:pi
password:raspberry |
(addr1)Baidu Pan: | raspbian_180418_MPI3508_800480.7z |
(addr2)Mega: | raspbian_180418_MPI3508_800480.7z | ||||
Ubuntu | Mate:16.04 | PI3,PI2 | user:pi
password:raspberry |
(addr1)Baidu Pan: | UbuntuMate_16.04Beta2_MPI3508_600400.7z |
(addr2)Mega: | UbuntuMate_16.04Beta2_MPI3508_600400.7z | ||||
Kali-linux | 2017.2 | PI3,PI2 | user:root
password:toor |
(addr1)Baidu Pan: | Kali_17.02_MPI3508_480320.7z |
(addr2)Mega: | Kali_17.02_MPI3508_480320.7z |
- 常用软件
|-|
常见问答=
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|-| 售后=
Tech Support:
Email: | Lcdwiki@163.com |
---|
Dear Customers:
There might be a delay of several hours in handling your question, depending on the time difference between your location and ours.
Sincerely hoping your understanding!
Our working time:
08:00-18:00 (Monday to Saturday) </tabber>