2.8inch SPI Module ILI9341 SKU:MSP2807

语言选择 Languages

➤中文

➤EN

Product Picture

Product Description

• 2.8-inch color screen,support 65K color display,display rich colors
• 320X240 resolution, clear display
• Using the SPI serial bus, it only takes a few IOs to illuminate the display
• Easy to expand the experiment with SD card slot
• Provide a rich sample program
• Military-grade process standards, long-term stable work
• Provide underlying driver technical support

Product Parameters

Name	Parameter
Display Color	RGB 65K color
SKU	have touch screen: MSP2807
	have no touch screen: MSP2806
Screen Size	2.8(inch)
Type	TFT
Driver IC	ILI9341
Resolution	320*240 (Pixel)
Module Interface	4-wire SPI interface
Active Area (AA area)	43.2x57.6(mm)
Module PCB Size	50.0x86.0(mm)
Operating Temperature	-20℃~70℃
Storage Temperature	-30℃~80℃
VCC power voltage	3.3V~5V
Logic IO port voltage	3.3V(TTL)
Power Consumption	About 90mA
Product Weight	25(g)

Interface Definition

Number	Pin Label	Description
1	VCC	5V/3.3V power input
2	GND	Ground
3	CS	LCD chip select signal, low level enable
4	RESET	LCD reset signal, low level reset
5	DC/RS	LCD register / data selection signal, high level: register, low level: data
6	SDI(MOSI)	SPI bus write data signal
7	SCK	SPI bus clock signal
8	LED	Backlight control, high level lighting, if not controlled, connect 3.3V always bright
9	SDO(MISO)	SPI bus read data signal, if you do not need to the read function, you can not connect it
(The following is the touch screen signal line wiring, if you do not need to touch function or the module itself does not have touch function, you can not connect them)
10	T_CLK	Touch SPI bus clock signal
11	T_CS	Touch screen chip select signal, low level enable
12	T_DIN	Touch SPI bus input
13	T_DO	Touch SPI bus output
14	T_IRQ	Touch screen interrupt signal, low level when touch is detected

Product Documentation

• 2.8 inch SPI Module User Manual
• 2.8 inch TFT Specifications
• 2.8 inch SPI Module Size Picture
• 2.8 inch SPI Module Schematic
• Driver IC ILI9341 Data sheet

Program Download

1. Demo_Arduino_Mega2560_Hardware_SPI
2. Demo_Arduino_Mega2560_Software_SPI
3. Demo_Arduino_UNO_Hardware_SPI
4. Demo_Arduino_UNO_Software_SPI
5. Demo_C51_STC12C5A60S2_Hardware_SPI
6. Demo_C51_STC12C5A60S2_Software_SPI
7. Demo_C51_STC89C52RC_Software_SPI
8. Demo_STM32F103RCT6_Hardware_SPI
9. Demo_STM32F103RCT6_Software_SPI
10. Demo_STM32F103ZET6_Hardware_SPI
11. Demo_STM32F103ZET6_Software_SPI
12. Demo_STM32F407ZGT6_Hardware_SPI
13. Demo_STM32F407ZGT6_Software_SPI
14. Demo_STM32F429IGT6_Hardware_SPI
15. Demo_STM32F429IGT6_Software_SPI

• 2.4 inch SPI Module Package(The above program is packaged with one click download)

Reference Materials

• Arduino IDE software use illustration
• C51 Keil and stc-isp software use illustration
• STM32 keil software use illustration
• PCtoLCD2002 software use illustration
• Image2Lcd software use illustration
• Chinese and English display modulo settings

How to use on Arduino

• Module instructions for use on the Arduino

Common Software

• PCtoLCD2002
• Image2Lcd

BACK TO TOP