Difference between revisions of "4inch HDMI Display-C"
(→Hardware Description) |
(→Hardware Description) (Tag: Visual edit) |
||
Line 75: | Line 75: | ||
{| class="wikitable" | {| class="wikitable" | ||
− | + | |Pin | |
− | + | |Name | |
− | + | |Description | |
|- | |- | ||
|1、17 | |1、17 | ||
|3.3V | |3.3V | ||
− | | | + | |Power supply +3.3V |
|- | |- | ||
|2、4 | |2、4 | ||
|5V | |5V | ||
− | | | + | |Power supply +5V |
|- | |- | ||
|3、5、7、8、10、11、12、13、15、16、18、24 | |3、5、7、8、10、11、12、13、15、16、18、24 | ||
Line 93: | Line 93: | ||
|6、9、14、20、25 | |6、9、14、20、25 | ||
|GND | |GND | ||
− | | | + | |GND |
|- | |- | ||
|19 | |19 | ||
|TP_SI | |TP_SI | ||
− | | | + | |SPI data input of touch panel |
|- | |- | ||
|21 | |21 | ||
|TP_SO | |TP_SO | ||
− | | | + | |SPI data output of touch panel |
|- | |- | ||
|22 | |22 | ||
|TP_IRQ | |TP_IRQ | ||
− | | | + | |The touch panel is interrupted and the low level is detected when the touch panel is pressed down |
|- | |- | ||
|23 | |23 | ||
|TP_SCK | |TP_SCK | ||
− | | | + | |Touch the SPI clock signal of the panel |
|- | |- | ||
|26 | |26 | ||
|TP_CS | |TP_CS | ||
− | | | + | |Touch panel select signal, low level select touch panel |
|} | |} | ||
Revision as of 19:27, 28 April 2019
Contents
Product Pictures
Product Description
- 4.0-inch IPS full-angle display, support HDMI input, refresh rate up to 60FPS
- The physical resolution is 800x480
- Raspberry Pi monitor with touch control (need to install touch driver)
- It can be used as standard HDMI output device for computer display(no touch function)
- Compatible with and can be directly inserted into all versions of raspberry PI motherboards (raspberry PI 1 generation B and Zero need additional HDMI cable)
- Support HDMI audio output, backlight brightness adjustable
Product Parameters
SKU | MPI4008 |
Screen Size | 4.0inch |
LCD Type | TFT |
Module Interface | HDMI |
Resolution | 800*480 (Pixel) |
Touch Screen Controller | XPT2046 |
LCD Driver IC | NT35510 |
Backlight | LED |
power consumption | 0.16A*5V |
Working temperature(℃) | -20~70 |
Module PCB Size | 98.60*58.05 (mm) |
Package Size | 143*134*51 (mm) |
Product Weight(g) | 125 (g) |
Hardware Description
- ① 3.5mm Headphone Jack: Output audio signal
- ② HDMI:Used to connect the main board and LCD display for HDMI transmission
- ③ Micro USB:Get 5V Power from USB, If ⑤-13*2 Pin Socket has been connected, that this USB interface can be No Connect.
- ④ Backlight adjustment button: Short press backlight change 10%, long press a few seconds to close backlight; short press to open backlight
- ⑤ 13*2 Pin Socket:Get +5V Power from raspberry Pi to LCD, at the same time transfer touch signal back to Raspberry Pi.
- 13*2 Pin Socket interface definition:
Pin | Name | Description |
1、17 | 3.3V | Power supply +3.3V |
2、4 | 5V | Power supply +5V |
3、5、7、8、10、11、12、13、15、16、18、24 | NC | NC |
6、9、14、20、25 | GND | GND |
19 | TP_SI | SPI data input of touch panel |
21 | TP_SO | SPI data output of touch panel |
22 | TP_IRQ | The touch panel is interrupted and the low level is detected when the touch panel is pressed down |
23 | TP_SCK | Touch the SPI clock signal of the panel |
26 | TP_CS | Touch panel select signal, low level select touch panel |
- 产品尺寸图(点击图片查看原图)
在树莓派Raspbian/Ubuntu Mate/Kali或Retropie系统中使用
- 步骤1,安装官方镜像
- 从官方下载最新镜像
- 按官方教程步骤安装好系统
- 步骤2,安装LCD驱动
1)用Putty连接登陆树莓派系统到用户命令行(初始用户名:pi 密码:raspberry)
2)执行以下命令(复制后在Putty窗口中单击鼠标右键即可粘贴):
sudo rm -rf LCD-show git clone https://github.com/goodtft/LCD-show.git chmod -R 755 LCD-show cd LCD-show/ sudo ./MPI4008-show
- 执行完上述命令后,系统会自动重启,重启就能正常显示和触摸了
如何作为普通显示器使用
- 使用HDMI连接线将电脑HDMI输出信号连接至LCD的HDMI接口;
- 将Micro USB连接线一端连接LCD的USB供电接口,另一端连接至电脑的USB端口。
- 如有多个显示器,请先拔掉其他显示器接口,将本LCD作为唯一显示器进行测试。
- 注: 触摸功能只能接树莓派使用。
如何旋转显示和触摸
Download Resources
- 文档
- 如何安装LCD驱动-V1.2
- 如何校准电阻触摸屏-V1.2
- 如何安装虚拟键盘(CN)
- 如何修改显示方向和触摸-HDMI-电阻触摸-V1.2
- 树莓派入门教程(下载,格式化,烧录,SSH,PuTTy)-V1.0
- 驱动下载
- 本地下载:LCD-show.tar.gz
- 镜像下载
- 如果你觉得前面步骤的修改配置、安装驱动都比较困难或者仍然显示异常,请先使用我们预装好驱动的镜像,
- 下载后解压并把镜像写入到TF卡中。然后把卡插入树莓派就可以使用了。
Image Name | Version | Support | Password | Download | |
---|---|---|---|---|---|
Raspbian(480X320) | 2019-04-08 | PI3B+/A/A+/B/B+/PI2/
PI3/ZERO/ZERO W |
user:pi
password:raspberry |
360Yun: | MPI4008-4inch-HDMI-C-Raspbian-20190408.7z |
Mega: | MPI4008-4inch-HDMI-C-Raspbian-20190408.7z | ||||
Ubuntu | Mate:16.04 | PI3,PI2 | user:pi
password:raspberry |
360Yun: | MPI4008-4inch-HDMI-C-Ubuntu-mate-18.04.7z |
Mega: | wait for upload | ||||
Kali-linux | 2019.1 | PI3B+,PI3,PI2 | user:root
password:toor |
360Yun: | MPI4008-4inch-HDMI-C-Kali-2019.1.7z |
Mega: | MPI4008-4inch-HDMI-C-Kali-2019.1.7z | ||||
RetroPie | 4.4 | PI3,PI2 | user:pi
password:raspberry |
360Yun: | wait for upload |
Mega: | wait for upload |
- 镜像文件MD5校验
- 常用软件