0.96inch IPS Module: Difference between revisions

Revision as of 16:33, 27 July 2019

0.96-inch color screen,support 65K color display,display rich colors
80X160 resolution, clear display
Large viewing angle(full angle),display color undistorted.
Using the 4-line-SPI serial bus, it only takes a few IOs to illuminate the display
Provide a rich STM32 and C51 sample program
Military-grade process standards, long-term stable work
Provide underlying driver technical support

Name	Parameter
Display Color	RGB 65K color
SKU	MSP0961
Screen Size	0.96(inch)
Type	IPS
Driver IC	ST7735S
Resolution	80*160 (Pixel)
Module Interface	4-line SPI interface
Active Area (AA area)	10.80x21.70 (mm)
Touch Screen Type	have no touch screen
Touch Screen Type	have no touch IC
Module PCB Size	30.00x24.04 (mm)
Angle of view	all angle
Operating Temperature	-10℃~60℃
Storage Temperature	-20℃~70℃
VCC power voltage	3.3V
Power Consumption	TBD
Rough Weight(Package containing)	8g

Number	Pin Label	Description
1	GND	LCD Power ground
2	VCC	LCD power supply is positive (3.3V)
3	SCL	LCD SPI bus clock signal
4	SDA	LCD SPI bus write data signal
5	RES	LCD reset control signal(Low level reset)
6	DC	LCD register / data selection control signal (Low level: register, high level: data)
7	CS	LCD selection control signal(Low level enable)
8	BLK	LCD backlight control signal (high level lighting, if you do not need control, please connect 3.3V)

@@ Line 84: / Line 84: @@
 |-
 | align="center" |1
-| align="center" |VCC
+| align="center" |GND
-|5V/3.3V power input
+|LCD Power ground
 |-
 | align="center" |2
-| align="center" |GND
+| align="center" |VCC
-|Ground
+|LCD power supply is positive (3.3V)
 |-
 | align="center" |3
-| align="center" |CS
+| align="center" |SCL
-|LCD chip select signal, low level enable
+|LCD SPI bus clock signal
 |-
 | align="center" |4
-| align="center" |RESET
+| align="center" |SDA
-|LCD reset signal, low level reset
+|LCD SPI bus write data signal
 |-
 | align="center" |5
-| align="center" |A0
+| align="center" |RES
-|LCD register / data selection signal,
+|LCD reset control signal(Low level reset)
-high level: register, low level: data
 |-
 | align="center" |6
-| align="center" |SDA
+| align="center" |DC
-|SPI bus write data signal
+|LCD register / data selection control signal
+(Low level: register, high level: data)
 |-
 | align="center" |7
-| align="center" |SCK
+| align="center" |CS
-|SPI bus clock signal
+|LCD selection control signal(Low level enable)
 |-
 | align="center" |8
-| align="center" |LED
+| align="center" |BLK
-|Backlight control, high level lighting,
+|LCD backlight control signal (high level lighting,
-if not controlled, connect 3.3V always bright
+if you do not need control, please connect 3.3V)
 |-
 |}