1.3inch IIC OLED Module SKU:MC130VX: Difference between revisions

Revision as of 16:17, 12 August 2019

1.3 inch OLED screen with black and white or black and blue color display
128x64 resolution for clear display and high contrast
Large viewing angle: greater than 160° (one screen with the largest viewing angle in the display)
Wide voltage supply (3V~5V), compatible with 3.3V and 5V logic levels, no level shifting chip required
With IIC bus, only a few IOs can be used to light up the display
Ultra-low power consumption: normal display is only 0.06W (far below the TFT display)
Military-grade process standards, long-term stable work
Provides a rich sample program for STM32, C51, Arduino, Raspberry Pi and MSP430 platforms
Provide underlying driver technical support

Name	Parameter
Display Color	white/blue
SKU	MC130VW/MC130VB
Screen Size	1.3(inch)
Screen Type	OLED
Driver IC	SH1106
Resolution	128*64 (Pixel)
Module Interface	IIC interface
Active Area	29.42x14.7(mm)
Touch Screen Type	have no touch screen
Touch IC	have no IC
Module PCB Size	33.50x35.40(mm)
Visual Angle	>160°
Operating Temperature	-20℃~60℃
Storage Temperature	-30℃~70℃
Operating Voltage	3.3V~5V
Power Consumption	TBD
Rough Weight(Package containing)	8(g)


Picture 1. Module pin silk screen	Picture 2. Rear view of the module

NOTE:

1.This module supports IIC slave device address switching (shown in red box in Picture 4), as follows:

A.Solder the 0x78 side resistance, disconnect the 0x7A side, then select the 0x78 slave address (default);

B.Solder the 0x7A side resistance, disconnect the 0x78 side, then select the 0x7A slave address;

2.The hardware switches the IIC slave device address, and the software also needs to be modified accordingly.

For details, see the test program description document or the user manual..

@@ Line 94: / Line 94: @@
 ::A.Solder the '''0x78''' side resistance, disconnect the '''0x7A''' side, then select the '''0x78''' slave address (default);
 ::B.Solder the '''0x7A''' side resistance, disconnect the '''0x78''' side, then select the '''0x7A''' slave address;
-::2.The hardware switches the IIC slave device address, and the software also needs to be modified accordingly.
+:2.The hardware switches the IIC slave device address, and the software also needs to be modified accordingly.
-:::For details, see the test program description document or the user manual..
+::For details, see the test program description document or the user manual..
 {| class="wikitable" border="1" style="width: 550px; background-color: white;"