Toggle search
Toggle menu
14
832
7
5,067
LCD wiki
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

3.5inch 16BIT RTP&CTP MODULE NT35310 SKU:MRB3512: Difference between revisions

From LCD wiki
More actions
← Older editNewer edit →
VisualWikitext
Lin (talk | contribs)
2,030 edits
Lin (talk | contribs)
2,030 edits
Line 88: Line 88:


1. The hardware of the module supports switching between resistance touch screen and  
1. The hardware of the module supports switching between resistance touch screen and  
:capacitive touch screen (as shown in the dotted line box in Picture 2 above), as follows:
:capacitive touch screen (as shown in the dotted line box in Picture 2 above), as follows:
:Use resistance touch screen: solder the components in the dotted line box of '''RTOUCH''',
:Use resistance touch screen: solder the components in the dotted line box of '''RTOUCH''',
Line 93: Line 94:
:Use capacitive touch screen: solder the components in the dotted line box of '''CTOUCH''',  
:Use capacitive touch screen: solder the components in the dotted line box of '''CTOUCH''',  
::::::::::and do not need to weld the components in the dotted line box of '''RTOUCH''';
::::::::::and do not need to weld the components in the dotted line box of '''RTOUCH''';
2. The hardware of this module only supports 16 bit mode
2. The hardware of this module only supports 16 bit mode
{| class="wikitable" border="1" style="width: 550px; background-color: white;"
{| class="wikitable" border="1" style="width: 550px; background-color: white;"
Line 120: Line 122:
|-
|-
| align="center" |6
| align="center" |6
| align="center" |DB0
| align="center" |D0
| rowspan="8" |LCD data bus low 8-bit pin
| rowspan="16" |LCD data bus16-bit pin
|-
|-
| align="center" |7
| align="center" |7
| align="center" |DB1
| align="center" |D1
|-
|-
| align="center" |8
| align="center" |8
| align="center" |DB2
| align="center" |D2
|-
|-
| align="center" |9
| align="center" |9
| align="center" |DB3
| align="center" |D3
|-
|-
| align="center" |10
| align="center" |10
| align="center" |DB4
| align="center" |D4
|-
|-
| align="center" |11
| align="center" |11
| align="center" |DB5
| align="center" |D5
|-
|-
| align="center" |12
| align="center" |12
| align="center" |DB6
| align="center" |D6
|-
|-
| align="center" |13
| align="center" |13
| align="center" |DB7
| align="center" |D7
|-
|-
| align="center" |14
| align="center" |14
| align="center" |DB8
| align="center" |D8
| rowspan="8" |LCD data bus high 8-bit pin(When using the 8-bit parallel port data bus mode, the upper 8-bit pin is not used.) 
|-
|-
| align="center" |15
| align="center" |15
| align="center" |DB9
| align="center" |D9
|-
|-
| align="center" |16
| align="center" |16
| align="center" |DB10
| align="center" |D10
|-
|-
| align="center" |17
| align="center" |17
| align="center" |DB11
| align="center" |D11
|-
|-
| align="center" |18
| align="center" |18
| align="center" |DB12
| align="center" |D12
|-
|-
| align="center" |19
| align="center" |19
| align="center" |DB13
| align="center" |D13
|-
|-
| align="center" |20
| align="center" |20
| align="center" |DB14
| align="center" |D14
|-
|-
| align="center" |21
| align="center" |21
| align="center" |DB15
| align="center" |D15
|-
|-
| align="center" |22
| align="center" |22
Line 179: Line 180:
| align="center" |24
| align="center" |24
| align="center" |VDD
| align="center" |VDD
| rowspan="2" |Module power positive pin (module has integrated voltage regulator IC, so the power supply can be connected to 5V or 3.3V)
| rowspan="2" |Module power positive pin (module has integrated voltage regulator IC, so it can be connected to 5V or 3.3V on STM32 and 5V on C51)
|-
|-
| align="center" |25
| align="center" |25
Line 196: Line 197:
|-
|-
| align="center" |29
| align="center" |29
| align="center" |NC
| align="center" |MI
|Not defined, no need to use
|Resistance touch screen SPI bus read signal
|-
|-
| align="center" |30
| align="center" |30
| align="center" |SDA
| align="center" |MO
|Capacitive touch screen IIC bus data pin
|Resistance touch screen SPI bus write signal or
capacitance touch screen IIC bus data signal
|-
|-
| align="center" |31
| align="center" |31
| align="center" |INT
| align="center" |PEN
|Capacitive touch screen interrupt detection pin (low level when a touch occurs)
|Capacitive or resistive touch screen interrupt detection pin (low level when touch occurs)
|-
|-
| align="center" |32
| align="center" |32
Line 212: Line 214:
|-
|-
| align="center" |33
| align="center" |33
| align="center" |CRST
| align="center" |TCS
|Capacitive touch screen IC reset control pin (low level reset)
|Resistance touch screen chip selection control signal or capacitive touch screen reset signal (low level reset)
|-
|-
| align="center" |34
| align="center" |34
| align="center" |SCL
| align="center" |TCK
|Capacitive touch screen IIC bus clock pin
|Resistance touch screen SPI bus or
capacitive touch screen IIC bus clock signal 
|-
|-
|}
|}

Revision as of 10:25, 9 July 2020

语言选择

Languages

➤中文
➤EN


Product Picture

Product Description

  • 3.5-inch color screen, support 16BIT RGB 65K color display,display rich colors
  • 320x480 resolution for clear display
  • Support switching between resistance touch screen and capacitive touch screen
  • Support 16-bit parallel data bus mode switching
  • Military-grade process standards, long-term stable work
  • Support punctual atom full range of development board inline
  • Provide STM32/C51 source code, WIKI data online update
  • Provide underlying driver technical support

Product Parameters

Name Parameter
Display Color 16BIT RGB 65K color
SKU MRB3512
Screen Size  3.5(inch)
Screen Type TFT
Driver IC NT35310
Resolution 480*320 (Pixel)
Module Interface 16Bit parallel interface
Active Area  48.96x73.44 (mm)
Touch Screen Type Capacitive touch screen (maximum support for 5 touches) and Resistance touch screen
Touch IC Resistance touch screen: XPT2046

Capacitive touch screen: GT911

Module PCB Size 56.41x97.60 (mm)
Operating Temperature -10℃~60℃
Storage Temperature -20℃~70℃
Operating Voltage 3.3V/5V
Power Consumption TBD
Rough Weight 57g

Interface Definition

Picture1. Module Front picture Picture2. Module rear picture


1. The hardware of the module supports switching between resistance touch screen and

capacitive touch screen (as shown in the dotted line box in Picture 2 above), as follows:
Use resistance touch screen: solder the components in the dotted line box of RTOUCH,
and do not need to weld the components in the dotted line box of CTOUCH;
Use capacitive touch screen: solder the components in the dotted line box of CTOUCH,
and do not need to weld the components in the dotted line box of RTOUCH;

2. The hardware of this module only supports 16 bit mode

Number Module Pin Pin Description
1 CS LCD reset control pin( low level enable)
2 RS LCD register / data selection control pin(high level: register, low level: data)
3 WR LCD write control pin
4 RD LCD read control pin 
5 RST LCD reset control pin( low level reset)
6 D0 LCD data bus16-bit pin
7 D1
8 D2
9 D3
10 D4
11 D5
12 D6
13 D7
14 D8
15 D9
16 D10
17 D11
18 D12
19 D13
20 D14
21 D15
22 GND Module power ground pin
23 BL LCD backlight control pin(High level light)
24 VDD Module power positive pin (module has integrated voltage regulator IC, so it can be connected to 5V or 3.3V on STM32 and 5V on C51)
25 VDD
26 GND Module power ground pin
27 GND
28 NC LCD backlight power positive pin (default shared onboard backlight power supply, this pin can not be connected)
29 MI Resistance touch screen SPI bus read signal
30 MO Resistance touch screen SPI bus write signal or

capacitance touch screen IIC bus data signal

31 PEN Capacitive or resistive touch screen interrupt detection pin (low level when touch occurs)
32 NC Not defined, no need to use
33 TCS Resistance touch screen chip selection control signal or capacitive touch screen reset signal (low level reset)
34 TCK Resistance touch screen SPI bus or

capacitive touch screen IIC bus clock signal 

How to use on STM32 development board

This module is compatible with the ALIENTEK STM32 development board. The specific usage is as follows:

  • Step 1: Download the test program
  1. Download the STM32 test program from the Program Download column
  2. For a description of the relevant test procedures, please refer to the test program documentation in the package
  • Step 2: Connect the STM32 development board
  1. Find the TFTLCD Slot on the development board, connect the module pins and Slot(For example, the module CS pin corresponds to the slot CS pin),
and then plug them directly into the Slot
  • Step 3: Compile and download the program to the development board
  1. Compile and download the program you need to test to the STM32 development board（ Don't know how to compile and download?）
  • Step 4: Observe the running of the program
  1. After the program is finished, observe the running status of the program. If it can be displayed normally, the program runs successfully.

Program Download

Product Documentation

Reference Materials

Common Software

BACK TO TOP

Retrieved from "http://www.lcdwiki.com/index.php?title=3.5inch_16BIT_RTP%26CTP_MODULE_NT35310_SKU:MRB3512&oldid=3444"
Contents
Last modified
This page was last edited on 9 July 2020, at 10:25.