More actions
| Line 85: | Line 85: | ||
==<font color="blue">Using Description</font> == | ==<font color="blue">Using Description</font> == | ||
* [http://www.lcdwiki.com/res/MAR1441/1. | * [http://www.lcdwiki.com/res/MAR1441/1.44inch_SPI_Arduino_Module_User_Manual_CN.pdf '''1.44inch module User Manual'''] | ||
* [http://www.lcdwiki.com/res/PublicFile/Arduino_IDE_Use_Illustration_EN.pdf '''Arduino IDE software use illustration'''] | * [http://www.lcdwiki.com/res/PublicFile/Arduino_IDE_Use_Illustration_EN.pdf '''Arduino IDE software use illustration'''] | ||
Latest revision as of 16:53, 19 January 2021
Product Picture
Wiring Description
| NUMBER | PIN | D1 miniDevelopment board corresponding wiring pin | Pin Description |
| 1 | VCC | 5V | Power positive |
| 2 | GND | G | Power ground |
| 3 | GND | - | Power ground |
| 4 | NC | - | No definition, reserved, no wiring required |
| 5 | NC | - | No definition, reserved, no wiring required |
| 6 | LED | D4 | LCD backlight control signal (if no control is needed, please connect to 3.3V) |
| 7 | CLK | D5 | LCD SPI bus clock pin |
| 8 | SDI | D7 | LCD SPI bus write data pin |
| 9 | RS | D3 | LCD register / data selection control pin |
| 10 | RST | D2 | LCD reset control pin |
| 11 | CS | D1 | LCD chip selection control pin |