Toggle search
Toggle menu
14
832
7
5,078
LCD wiki
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

4.3inch 16BIT Module SSD1963: Difference between revisions

From LCD wiki
More actions
← Older editNewer edit →
VisualWikitext
Lin (talk | contribs)
2,040 edits
Lin (talk | contribs)
2,040 edits
Line 84: Line 84:


==<font color="blue">Interface Definition</font> ==
==<font color="blue">Interface Definition</font> ==
[[File:MRB3952-004.jpg|650px]]
[[File:MRG4963-001.png|700px]]


'''The product hardware only supports 16-bit parallel port bus transmission'''
'''Note:'''
 
:A.The pins beginning with T are the relevant pins of the resistive touch screen;
:B.The pins beginning with SD are SD card related pins;
:C.Pins beginning with F are SPI flash related pins;
:D.NC/ starts with relevant pins of capacitive touch screen;
:E.The rest are LCD related pins;
:F.SPI flash is not welded. If you need to use it, please weld it yourself;


{| class="wikitable" border="1" style="width: 650px; background-color: white;"
{| class="wikitable" border="1" style="width: 650px; background-color: white;"
|-
| align="center" |Number
| align="center" |Number
| align="center" |Pin Label
| align="center" |Pin Name
| align="center" |Description
| align="center" |Pin Name
|-
|-
| align="center" |1
| align="center" |1
| align="center" |CS
| align="center" |GND
|LCD reset control pin( low level enable)
|电源地
|-
|-
| align="center" |2
| align="center" |2
| align="center" |RS
| align="center" |3.3V
|LCD register / data selection control pin(high level: register, low level: data)
|电源输入引脚（接3.3V）
|-
|-
| align="center" |3
| align="center" |3
| align="center" |WR
| align="center" |NC
|LCD write control pin
|无定义，保留
|-
|-
| align="center" |4
| align="center" |4
| align="center" |RD
| align="center" |RS
|LCD read control pin 
|液晶屏寄存器/数据选择控制引脚（低电平：寄存器，高电平：数据）
|-
|-
| align="center" |5
| align="center" |5
| align="center" |RST
| align="center" |WR
|LCD reset control pin( low level reset)
|液晶屏写控制引脚
|-
|-
| align="center" |6
| align="center" |6
| align="center" |DB0
| align="center" |RD
| rowspan="8" |LCD data bus low 8-bit pin
|液晶屏读控制引脚
|-
| align="center" |7
| align="center" |DB1
|-
|-
| align="center" |8
| align="center" |7~14
| align="center" |DB2
| align="center" |DB8 ~ DB15
|-
|液晶屏高8位数据总线引脚
| align="center" |9
| align="center" |DB3
|-
| align="center" |10
| align="center" |DB4
|-
| align="center" |11
| align="center" |DB5
|-
| align="center" |12
| align="center" |DB6
|-
| align="center" |13
| align="center" |DB7
|-
| align="center" |14
| align="center" |DB8
| rowspan="8" |LCD data bus high 8-bit pin
|-
|-
| align="center" |15
| align="center" |15
| align="center" |DB9
| align="center" |CS
|液晶屏片选控制引脚（低电平使能）
|-
|-
| align="center" |16
| align="center" |16
| align="center" |DB10
| align="center" |F_CS
|SPI FLASH片选控制引脚（低电平使能）
|-
|-
| align="center" |17
| align="center" |17
| align="center" |DB11
| align="center" |REST
|液晶屏复位控制引脚（低电平复位）
|-
|-
| align="center" |18
| align="center" |18
| align="center" |DB12
| align="center" |NC
|无定义，保留
|-
|-
| align="center" |19
| align="center" |19
| align="center" |DB13
| align="center" |LED_A
|液晶屏背光控制引脚（需要根据选择使用）
|-
|-
| align="center" |20
| align="center" |20
| align="center" |DB14
| align="center" |NC/INT
|接电阻触摸屏时无定义
接电容触摸屏时作为中断引脚
|-
|-
| align="center" |21
| align="center" |21~28
| align="center" |DB15
| align="center" |DB0~DB7
|液晶屏低8位数据总线引脚
|-
|-
| align="center" |22
| align="center" |29
| align="center" |SDCS
| align="center" |T_CLK
|SD card selection control pin (used when using the SD card expansion function, this test program is not used)
|电阻触摸屏SPI总线时钟引脚
|-
|-
| align="center" |23
| align="center" |30
| align="center" |BL
| align="center" |T_CS
|LCD backlight control pin(High level light)
|电阻触摸屏片选引脚（低电平使能）
|-
|-
| align="center" |24
| align="center" |31
| align="center" |VDD
| align="center" |T_DIN
| rowspan="2" |Module power positive pin (module has integrated voltage regulator IC, so the power supply can be connected to 5V or 3.3V)
|电阻触摸屏SPI总线写数据引脚
|-
|-
| align="center" |25
| align="center" |32
| align="center" |VDD
| align="center" |NC/CRT
|接电阻触摸屏时无定义
接电容触摸屏时作为复位引脚（低电平复位）
|-
|-
| align="center" |26
| align="center" |33
| align="center" |GND
| align="center" |T_DO
| rowspan="2" |Module power ground pin
|电阻触摸屏SPI总线读数据引脚
|-
|-
| align="center" |27
| align="center" |34
| align="center" |GND
| align="center" |T_IRQ
|电阻触摸屏中断检测引脚（低电平有效）
|-
|-
| align="center" |28
| align="center" |35
| align="center" |NC
| align="center" |SD_DO
|LCD backlight power positive pin (default shared onboard backlight power supply, this pin can not be connected)
|SD卡SDIO总线读数据引脚
|-
|-
| align="center" |29
| align="center" |36
| align="center" |MISO
| align="center" |SD_CLK
|Touch screen SPI bus data input pin(This module has no touch screen and this pin is not used)
|SD卡SDIO总线时钟引脚
|-
|-
| align="center" |30
| align="center" |37
| align="center" |MOSI
| align="center" |SD_DIN
|Touch screen SPI bus data output pin(This module has no touch screen and this pin is not used)
|SD卡SDIO总线写数据引脚
|-
|-
| align="center" |31
| align="center" |38
| align="center" |PEN
| align="center" |SD_CS
|Touch screen interrupt detection pin(Low level when a touch occurs.This module has no touch screen and this pin is not used)
|SD卡片选引脚（低电平使能）
|-
|-
| align="center" |32
| align="center" |39
| align="center" |FCS
| align="center" |NC/SDA
|Flash chip select control pin (used when using the Flash extension function, this test program is not used)
|接电阻触摸屏时无定义
接电容触摸屏时作为IIC总线数据引脚
|-
|-
| align="center" |33
| align="center" |40
| align="center" |T_CS
| align="center" |NC/SCL
|Touch screen IC chip select control pin(Low level enable.This module has no touch screen and this pin is not used)
|接电阻触摸屏时无定义
|-
接电容触摸屏时作为IIC总线时钟引脚
| align="center" |34
| align="center" |CLK
|Touch screen SPI bus clock control pin(This module has no touch screen and this pin is not used)
|-
|-
|}
|}

Revision as of 11:07, 15 July 2022

语言选择

Languages

➤中文
➤EN



Product Picture


Product Description

  • 4.3-inch high-definition color screen, supporting 16bit RGB 65K color display, with rich display colors
  • Support IPS screen 800x480 resolution, and the display effect is very clear
  • Support TN screen with 480x272 resolution and clear display effect
  • Using 16-bit parallel bus transmission with fast transfer speed
  • Compatible with capacitive touch screen and resistive touch screen
  • Support SPI flash
  • With SD card slot, support SD card expansion
  • Support three backlight control modes (always on, GPIO control, PWM control)
  • Provides a rich sample program for STM32 and C51 platforms
  • Military-grade process standards, long-term stable work
  • Provide underlying driver technical support

Product Parameters

Name Parameter
Display Color 16BIT RGB 65K color
SKU MRB4963
Screen Size  4.3(inch)
Screen Type TFT
Driver IC SSD1963
Resolution IPS: 800x480(Pixel)

TN: 480x272(Pixel)

Module Interface 16Bit parallel interface
Active Area  95.04.00x53.858(mm)
Touch Screen Type  Capacitive touch screen or Resistive touch screen
Touch IC GT911 (capacitive touch), XPT2046 (resistive touch)
Module PCB Size 120.00x74.00(mm)
Operating Temperature -10℃~60℃
Storage Temperature -20℃~70℃
Operating Voltage 3.3V
IO Voltage 3.3V
Power Consumption TBD
Rough Weight(Package containing) TBD

Interface Definition

Note:

A.The pins beginning with T are the relevant pins of the resistive touch screen;
B.The pins beginning with SD are SD card related pins;
C.Pins beginning with F are SPI flash related pins;
D.NC/ starts with relevant pins of capacitive touch screen;
E.The rest are LCD related pins;
F.SPI flash is not welded. If you need to use it, please weld it yourself;
Number Pin Name Pin Name
1 GND 电源地
2 3.3V 电源输入引脚（接3.3V）
3 NC 无定义，保留
4 RS 液晶屏寄存器/数据选择控制引脚（低电平：寄存器，高电平：数据）
5 WR 液晶屏写控制引脚
6 RD 液晶屏读控制引脚
7~14 DB8 ~ DB15 液晶屏高8位数据总线引脚
15 CS 液晶屏片选控制引脚（低电平使能）
16 F_CS SPI FLASH片选控制引脚（低电平使能）
17 REST 液晶屏复位控制引脚（低电平复位）
18 NC 无定义，保留
19 LED_A 液晶屏背光控制引脚（需要根据选择使用）
20 NC/INT 接电阻触摸屏时无定义

接电容触摸屏时作为中断引脚

21~28 DB0~DB7 液晶屏低8位数据总线引脚
29 T_CLK 电阻触摸屏SPI总线时钟引脚
30 T_CS 电阻触摸屏片选引脚（低电平使能）
31 T_DIN 电阻触摸屏SPI总线写数据引脚
32 NC/CRT 接电阻触摸屏时无定义

接电容触摸屏时作为复位引脚（低电平复位）

33 T_DO 电阻触摸屏SPI总线读数据引脚
34 T_IRQ 电阻触摸屏中断检测引脚（低电平有效）
35 SD_DO SD卡SDIO总线读数据引脚
36 SD_CLK SD卡SDIO总线时钟引脚
37 SD_DIN SD卡SDIO总线写数据引脚
38 SD_CS SD卡片选引脚（低电平使能）
39 NC/SDA 接电阻触摸屏时无定义

接电容触摸屏时作为IIC总线数据引脚

40 NC/SCL 接电阻触摸屏时无定义

接电容触摸屏时作为IIC总线时钟引脚

How to use on STM32 development board

This module is compatible with the ALIENTEK STM32 development board. The specific usage is as follows:

  • Step 1: Download the test program
  1. Download the STM32 test program from the Program Download column
  2. For a description of the relevant test procedures, please refer to the test program documentation in the package
  • Step 2: Connect the STM32 development board
  1. Find the TFTLCD Slot on the development board, connect the module pins and Slot(For example, the module CS pin corresponds to the slot CS pin),
and then plug them directly into the Slot
  • Step 3: Compile and download the program to the development board
  1. Compile and download the program you need to test to the STM32 development board（ Don't know how to compile and download?）
  • Step 4: Observe the running of the program
  1. After the program is finished, observe the running status of the program. If it can be displayed normally, the program runs successfully.

Program Download

Product Documentation

Reference Materials

Common Software

BACK TO TOP

Retrieved from "http://www.lcdwiki.com/index.php?title=4.3inch_16BIT_Module_SSD1963&oldid=4078"
Contents
Last modified
This page was last edited on 15 July 2022, at 11:07.