More actions
Created page with "{{lan | cn=http://www.lcdwiki.com/zh/1.54inch_IIC_OLED_Module_SKU:MC154GX | en=http://www.lcdwiki.com/1.54inch_IIC_OLED_Module_SKU:MC154GX }} == <font color="blue"..." |
No edit summary |
||
Line 31: | Line 31: | ||
|- | |- | ||
| align="center" |SKU | | align="center" |SKU | ||
| align="center" | | | align="center" |MC154GW/MC154GB | ||
|- | |- | ||
| align="center" |Screen Size | | align="center" |Screen Size | ||
| align="center" |1. | | align="center" |1.54(inch) | ||
|- | |- | ||
| align="center" |Screen Type | | align="center" |Screen Type | ||
Line 40: | Line 40: | ||
|- | |- | ||
| align="center" |Driver IC | | align="center" |Driver IC | ||
| align="center" | | | align="center" |SSD1309 | ||
|- | |- | ||
| align="center" |Resolution | | align="center" |Resolution | ||
Line 49: | Line 49: | ||
|- | |- | ||
| align="center" |Active Area | | align="center" |Active Area | ||
| align="center" | | | align="center" |35.052x17.516(mm) | ||
|- | |- | ||
| align="center" |Touch Screen Type | | align="center" |Touch Screen Type | ||
Line 58: | Line 58: | ||
|- | |- | ||
| align="center" |Module PCB Size | | align="center" |Module PCB Size | ||
| align="center" | | | align="center" |42.40x38.00(mm) | ||
|- | |- | ||
| align="center" |Visual Angle | | align="center" |Visual Angle | ||
Line 76: | Line 76: | ||
|- | |- | ||
| align="center" |Rough Weight(Package containing) | | align="center" |Rough Weight(Package containing) | ||
| align="center" | | | align="center" |12(g) | ||
|} | |} | ||
Revision as of 18:43, 13 September 2022
Product Picture
Product Description
- 1.54 inch OLED screen with black and white or black and blue color display
- 128x64 resolution for clear display and high contrast
- Large viewing angle: greater than 160° (one screen with the largest viewing angle in the display)
- Wide voltage supply (3V~5V), compatible with 3.3V and 5V logic levels, no level shifting chip required
- With IIC bus, only a few IOs can be used to light up the display
- Ultra-low power consumption: normal display is only 0.06W (far below the TFT display)
- Military-grade process standards, long-term stable work
- Provides a rich sample program for STM32, C51, Arduino, Raspberry Pi and MSP430 platforms
- Provide underlying driver technical support
Product Parameters
Name | Parameter |
Display Color | white/blue |
SKU | MC154GW/MC154GB |
Screen Size | 1.54(inch) |
Screen Type | OLED |
Driver IC | SSD1309 |
Resolution | 128*64 (Pixel) |
Module Interface | IIC interface |
Active Area | 35.052x17.516(mm) |
Touch Screen Type | have no touch screen |
Touch IC | have no IC |
Module PCB Size | 42.40x38.00(mm) |
Visual Angle | >160° |
Operating Temperature | -20℃~60℃ |
Storage Temperature | -30℃~70℃ |
Operating Voltage | 3.3V~5V |
Power Consumption | TBD |
Rough Weight(Package containing) | 12(g) |
Interface Definition
Picture 1. Module pin silk screen | Picture 2. Rear view of the module |
NOTE:
- 1.This module supports IIC slave device address switching (shown in red box in Picture 4), as follows:
- A.Solder the 0x78 side resistance, disconnect the 0x7A side, then select the 0x78 slave address (default);
- B.Solder the 0x7A side resistance, disconnect the 0x78 side, then select the 0x7A slave address;
- 2.The hardware switches the IIC slave device address, and the software also needs to be modified accordingly.
- For details, see the test program description document or the user manual..
Number | Module Pin | Pin description |
1 | GND | OLED power ground |
2 | VCC | OLED power positive (3.3V~5V) |
3 | SCL | OLED IIC bus clock signal |
4 | SDA | OLED IIC bus data signal |
Product Documentation
- 1.3inch IIC_OLED Module User Manual
- 1.3inch OLED Specification
- 1.3inch IIC_OLED Module Size Picture
- 1.3inch IIC_OLED Module Schematic
- 1.3inch IIC_OLED Module OLED Schematic and PCB Package Library
- Driver IC SH1106 Datasheet
Program Download
Reference Materials
- Arduino IDE software use illustration
- RaspberryPi GPIO library installation instructions
- Python Image Library installation instructions
- C51 Keil and stc-isp software use illustration
- STM32 keil software use illustration
- IAR_IDE and MspFet software use illustration
- PCtoLCD2002 software use illustration
- Image2Lcd software use illustration
- Chinese and English display modulo settings