0.96inch IPS ST7789 Module SKU:MSP0964: Difference between revisions

Latest revision as of 09:34, 19 October 2023

0.96inch color screen with 240x198 resolution of 65K colors and rich display colors
The upgrade adopts IPS full view panel, with good visual angle
On board level conversion circuit, compatible with 5V and 3.3V MCU
Adopting a 4-wire SPI serial bus to save I/O pins
Unique circular display screen
Module input supports a 2.54mm spacing needle interface
Provide rich example learning programs (ESP32/STM32/Arduino UNO&Mage2560/C51/CH32/RaspberryPi)
Provide low-level driver technical support, and update WIKI information online
Multiple tests for module aging can meet military level standards, supporting long-term stable work

Name	Parameter
LCD Parameters
Screen Size	0 96inch
Screen Type	IPS
Resolution	240xRGBx198(pixels)
Active Area (AA area)	24.408(W)x20.137(H)(mm)
Number of Colors(Max)	65K
Driver IC	ST7789H2
Display Interface	4-Line SPI
Pixel Size	0.1017(H)x0.1017(V)(mm)
View Angle	ALL 0’CLOCK
Brightness(TYP)	300(cd/m²)
Backlight Type	White LED*2
Operation Temperature	-10~60(℃)
Storage Temperature	-20~70(℃)
Size Parameters
TFT Outline Size	27.4±0.2(W)x27.0±0.2(H)x1.31±0.15(D)(mm)(Excluding adhesive backing)
Module Outline Size	28.4(W)x33.0(H)x11.17(D)(mm)(including Pin Header)
Electrical Parameters
Working Voltage	5.0 V/3.3V
Backlight Current	40 mA
Power	0.09 W
Other Parameters
SKU	MSP0964
Interface	8P 2.54mm pin interface
Weight(including package)	13g

Number	Interface	Function Description
①	8P pin arrangement	2.54mm spacing row pins, module signal input pins

Number	Pin Label	Description
1	GNDVCC	LCD Power ground
2	VCC	LCD power positive(It is recommended to connect to 5V. When connected to 3.3V, the backlight brightness will be slightly dim)
3	CL	LCD SPI bus clock signal
4	SDA	LCD SPI bus write data signal
5	RES	LCD reset control signal, Low level reset
6	DC	LCD command / data selection control signal High level: data, low level: command
7	CS	LCD selection control signal, Low level active
8	BLK	LCD backlight control signal (If you need control, please connect the pins. If you don't need control, you can skip it)

@@ Line 176: / Line 176: @@
 * [http://www.lcdwiki.com/res/MSP0964/0.96inch_SPI_MSP0964_CH32_Demo_Instructions_EN.pdf '''0.96inch IPS SPI Module CH32 Demo Instructions''']
 * [http://www.lcdwiki.com/res/MSP0964/0.96inch_SPI_MSP0964_ESP32_Demo_Instructions_EN.pdf '''0.96inch IPS SPI Module ESP32 Demo Instructions''']
-* [http://www.lcdwiki.com/res/MSP0964/0.96inch_SPI_MSP0964_RaspberryPi_Demo_Instructions_EN.pdf '''0.968inch IPS SPI Module RaspberryPi Demo Instructions''']
+* [http://www.lcdwiki.com/res/MSP0964/0.96inch_SPI_MSP0964_RaspberryPi_Demo_Instructions_EN.pdf '''0.96inch IPS SPI Module RaspberryPi Demo Instructions''']
 * [http://www.lcdwiki.com/res/MSP0964/0.96inch_SPI_MSP0964_STM32_Demo_Instructions_EN.pdf '''0.96inch IPS SPI Module STM32 Demo Instructions''']
 * [http://www.lcdwiki.com/res/MSP0964/0.96inch_SPI_MSP0964_UNO_Mega2560_Demo_Instructions_EN.pdf '''0.96inch IPS SPI Module UNO_Mega2560 Demo Instructions''']