More actions
Product Picture
Product Description
- 1.3 inch OLED screen with black and white or black and blue color display
- 128x64 resolution for clear display and high contrast
- Large viewing angle: greater than 160° (one screen with the largest viewing angle in the display)
- Wide voltage supply (3V~5V), compatible with 3.3V and 5V logic levels, no level shifting chip required
- With IIC bus, only a few IOs can be used to light up the display
- Ultra-low power consumption: normal display is only 0.06W (far below the TFT display)
- Military-grade process standards, long-term stable work
- Provides a rich sample program for STM32, C51, Arduino, Raspberry Pi and MSP430 platforms
- Provide underlying driver technical support
Product Parameters
| Name | Parameter |
| Display Color | white/blue |
| SKU | MC130VW/MC130VB |
| Screen Size | 1.3(inch) |
| Screen Type | OLED |
| Driver IC | SH1106 |
| Resolution | 128*64 (Pixel) |
| Module Interface | IIC interface |
| Active Area | 29.42x14.7(mm) |
| Touch Screen Type | have no touch screen |
| Touch IC | have no IC |
| Module PCB Size | 33.50x35.40(mm) |
| Visual Angle | >160° |
| Operating Temperature | -20℃~60℃ |
| Storage Temperature | -30℃~70℃ |
| Operating Voltage | 3.3V~5V |
| Power Consumption | TBD |
| Rough Weight(Package containing) | 8(g) |
Interface Definition
|
|
|---|---|
| Picture 1. Module pin silk screen | Picture 2. Rear view of the module |
| Number | Module Pin | Pin description |
| 1 | VCC | OLED power positive (3.3V~5V) |
| 2 | GND | OLED power ground |
| 3 | SCL | OLED IIC bus clock signal |
| 4 | SDA | OLED IIC bus data signal |
Product Documentation
- 1.3inch IIC_OLED Module User Manual
- 1.3inch OLED Specification
- 1.3inch IIC_OLED Module Size Picture
- 1.3inch IIC_OLED Module Schematic
- 1.3inch IIC_OLED Module OLED Schematic and PCB Package Library
- Driver IC SH1106 Datasheet
Program Download
Reference Materials
- Arduino IDE software use illustration
- RaspberryPi GPIO library installation instructions
- Python Image Library installation instructions
- C51 Keil and stc-isp software use illustration
- STM32 keil software use illustration
- IAR_IDE and MspFet software use illustration
- PCtoLCD2002 software use illustration
- Image2Lcd software use illustration
- Chinese and English display modulo settings