More actions
Raspberry Pi LCD Driver installation instruction (method1: online installation)
This manual is applicable to all series of Raspberry Pi LCD, Raspberry Pi board should be connected to Internet during the installation.
Step 1, Install Raspbian official image
1) Download the latest Raspbian Image from the official website: https://www.raspberrypi.org/downloads/
2) Format TF card by SDFormatter
3) Burn the official image into TF card by using Win32DiskImager
Step 2, obtain the LCD driver
Log onto the Raspberry Pi users system to command line (The initial user name: pi Password: raspberry) Get the newest driver from GitHub(Raspberry Pi LCD should be connected to internet)
git clone https://github.com/goodtft/LCD-show.git chmod -R 755 LCD-show cd LCD-show/
Step 3, install LCD driver
the corresponding execution for the use of 2.4” LCD Raspberry Pi:
sudo ./LCD24-show
the corresponding execution for the use of 2.8” LCD Raspberry Pi:
sudo ./LCD28-show
the corresponding execution for the use of 3.2” LCD Raspberry Pi:
sudo ./LCD32-show
the corresponding execution for the use of 3.5” LCD Raspberry Pi:
sudo ./LCD35-show
the corresponding execution for the use of 3.5” MPI3508 LCD Raspberry Pi:
sudo ./MPI3508-show
the corresponding execution for the use of 3.97” LCD Raspberry Pi:
sudo ./LCD397-show
the corresponding execution for the use of 4.3” LCD Raspberry Pi:
sudo ./LCD43-show
the corresponding execution for the use of 5.0” LCD Raspberry Pi:
sudo ./LCD5-show
the corresponding execution for the use of 5” MPI5001 LCD Raspberry Pi:
sudo ./MPI5001-show
the corresponding execution for the use of 7.0” LCD version B 800*400:
sudo ./LCD7B-show
the corresponding execution for the use of 7.0” LCD version C 1024*600:
sudo ./LCD7C-show
the corresponding execution to switch back to Traditional HDMI display.
sudo ./LCD-hdmi
Wait for a moment after executing the above command, then you can use the corresponding raspberry LCD.
树莓派LCD驱动安装说明（方法2: 离线安装）
本文适用于全系列树莓派液晶屏，如客户已有LCD驱动安装光盘，可离线操作
步骤1, 安装Raspbian官方镜像
1）从官方下载最新Raspbian镜像 https://www.raspberrypi.org/downloads/
2）使用SDFormatter格式化Micro SD卡
3）使用Win32DiskImager把官方镜像烧录到Micro SD卡
步骤2, 获取LCD驱动
从配套光盘内提取或咨询卖家索取，将LCD-show.tar.gz驱动复制到树莓派系统根目录下 （推荐步骤1烧录完成后将驱动直接拷贝到SD卡，或使用SFTP等办法远程拷贝）执行以下操作命令解压驱动:
cd /boot sudo tar zxvf LCD-show.tar.gz cd LCD-show/
步骤3, 安装LCD驱动
如使用2.4寸树莓派LCD则对应执行:
sudo ./LCD24-show
如使用2.8寸树莓派LCD则对应执行:
sudo ./LCD28-show
如使用3.2寸树莓派LCD则对应执行:
sudo ./LCD32-show
如使用3.5寸树莓派LCD则对应执行:
sudo ./LCD35-show
如使用3.5寸树莓派MPI3508，则对应执行:
sudo ./MPI3508-show
如使用3.97寸树莓派LCD则对应执行:
sudo ./LCD397-show
如使用4.3寸树莓派LCD则对应执行:
sudo ./LCD43-show
如使用5寸树莓派LCD则对应执行:
sudo ./LCD5-show
如使用5寸树莓派B款MPI5001，则对应执行:
sudo ./MPI5001-show
如使用7寸B款800X480则对应执行:
sudo ./LCD7B-show
如使用7寸C款1024X600则对应执行:
sudo ./LCD7C-show
如需切换回传统HDMI显示器则对应执行:
sudo ./LCD-hdmi
执行完上述命令后稍等片刻，即可使用对应的树莓派LCD。