More actions
Raspberry Pi LCD Driver installation instruction (method1: online installation)
This manual is applicable to all series of Raspberry Pi LCD, Raspberry Pi board should be connected to Internet during the installation.
Step 1, Install Raspbian official image
1) Download the latest Raspbian Image from the official website: https://www.raspberrypi.org/downloads/
2) Format Micro SD card by SDFormatter
3) Burn the official image into Micro SD car by using Win32DiskImager
Step 2, obtain the LCD driver
Log onto the Raspberry Pi users system to command line (The initial user name: pi Password: raspberry) Get the newest driver from GitHub(Raspberry Pi LCD should be connected to internet)
git clone https://github.com/goodtft/LCD-show.git chmod -R 755 LCD-show cd LCD-show/
Step 3, install LCD driver
the corresponding execution for the use of 2.4” LCD Raspberry Pi:
sudo ./LCD24-show
the corresponding execution for the use of 2.8” LCD Raspberry Pi:
sudo ./LCD28-show
the corresponding execution for the use of 3.2” LCD Raspberry Pi:
sudo ./LCD32-show
the corresponding execution for the use of 3.5” LCD Raspberry Pi:
sudo ./LCD35-show
the corresponding execution for the use of 3.5” MPI3508 LCD Raspberry Pi:
sudo ./MPI3508-show
the corresponding execution for the use of 3.97” LCD Raspberry Pi:
sudo ./LCD397-show
the corresponding execution for the use of 4.3” LCD Raspberry Pi:
sudo ./LCD43-show
the corresponding execution for the use of 5.0” LCD Raspberry Pi:
sudo ./LCD5-show
the corresponding execution for the use of 5”-B MPI5001 LCD Raspberry Pi:
sudo ./MPI5001-show
the corresponding execution for the use of 7.0” LCD version B 800*400:
sudo ./LCD7B-show
the corresponding execution for the use of 7.0” LCD version C 1024*600:
sudo ./LCD7C-show
the corresponding execution to switch back to Traditional HDMI display.
sudo ./LCD-hdmi
Wait for a moment after executing the above command, then you can use the corresponding raspberry LCD.
Raspberry Pi LCD Driver installation instruction (method2: offline)
This manual is applicable to all series of Raspberry Pi LCD; if you already have the driver installation CD, can just use it offline.
Step 1, Install Raspbian official image
1) Download the latest Raspbian Image from the official website: https://www.raspberrypi.org/downloads/
2) Format Micro SD car by SDFormatter
3) Burn the official image into Micro SD car by using Win32DiskImager
Step 2, obtain the LCD driver
Extract from the companion CD or ask for it from the seller; Copy the LCD-show.tar.gz drive to the Raspberry Pi system root directory (Suggestion: copy flash driver directly to Micro SD car after completion of Step 1, or copy by SFTP or other methods for remote copy). Unzip and extract drive files as the following command:
cd /boot sudo tar LCD-show.tar.gz cd LCD-show/
Step 3, install LCD driver
the corresponding execution for the use of 2.4” LCD Raspberry Pi:
sudo ./LCD24-show
the corresponding execution for the use of 2.8” LCD Raspberry Pi:
sudo ./LCD28-show
the corresponding execution for the use of 3.2” LCD Raspberry Pi:
sudo ./LCD32-show
the corresponding execution for the use of 3.5” LCD Raspberry Pi:
sudo ./LCD35-show
the corresponding execution for the use of 3.5” MPI3508 LCD Raspberry Pi:
sudo ./MPI3508-show
the corresponding execution for the use of 3.97” LCD Raspberry Pi:
sudo ./LCD397-show
the corresponding execution for the use of 4.3” LCD Raspberry Pi:
sudo ./LCD43-show
the corresponding execution for the use of 5.0” LCD Raspberry Pi:
sudo ./LCD5-show
the corresponding execution for the use of 5”-B MPI5001 LCD Raspberry Pi:
sudo ./MPI5001-show
the corresponding execution for the use of 7.0” LCD version B 800*400:
sudo ./LCD7B-show
the corresponding execution for the use of 7.0” LCD version C 1024*600:
sudo ./LCD7C-show
the corresponding execution to switch back to Traditional HDMI display.
sudo ./LCD-hdmi
Wait for a moment after executing the above command, then you can use the corresponding raspberry LCD.