2.4inch RPi Display For RPi 3A+

语言选择 Languages

➤中文

➤EN

Product Pictures

Product Features

• 2.4inch standard display with physical resolution of 320×240
• SPI interface with resistive touch screen for touch control
• perfectly compatible and can be directly inserted into any version of the Raspberry Pi (Raspberry Pi ZeroW, A, A+, B, B+, 2B, 3B, 3B+)
• Support for Raspbian/Ubuntu/Kali systems, Provide driver, image, and online wiki guidance documents
• This product has passed CE and RoHS certification

Main Parameters

Name	Description
SKU	MPI2411
Screen Size	2.4inch
LCD Type	TFT
Module Interface	SPI
Resolution	320*240 (Pixel)
Active Area	36.72x48.96(mm)
Touch Screen Controller	XPT2046
LCD Driver IC	ILI9341
Backlight	LED
Power Consumption	0.08A*5V
Operating Temperature（℃）	-20~60
Module PCB Size	56.00x65.00(mm)
Rough Weight(Package containing)(g)	37 (g)

Hardware Description

• Interface Definition

Pin Number	Identification	Description
1, 17	3.3V	Power supply (3.3V power input)
2, 4	5V	Power supply (5V power input)
3, 5, 7, 8, 10, 12， 16，18，22	NC	Not connected
6, 9, 14, 20, 25	GND	Power ground
11	TP_IRQ	The touch panel is interrupted, and it is detected that the touch panel is pressed low.
15	LCD_RS	Instruction/data register selection, low level is instruction, high level is data
19	LCD_SI / TP_SI	LCD display / touch panel SPI data input
21	TP_SO	Touch panel SPI data output
13	RST	Reset signal, low reset
23	LCD_SCK / TP_SCK	LCD display / touch panel SPI clock signal
24	LCD_CS	LCD chip select signal, low level enable
26	TP_CS	Touch panel chip select signal, low level enable

• Product Size

How to use with Raspberry Pi OS

• Step 1, Install official image Raspberry Pi OS
  

1) Download the latest image from the official download

    https://www.raspberrypi.com/software/operating-systems/

2) Install the system according to the official tutorial steps.

• Step 2, Install the driver for the LCD
  

1) Connect the 2.4inch RPi Display For RPi 3A+ with the Raspberry Pi and plug it in

2) Log into the command line interface for Raspberry Pi（Initial user name: pi, Password: raspberry）, Get the latest drive from GitHub (the raspberry pie needs to connect to the Internet), Execute the following commands:

sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD24-3A+-show

After execution, the system will be restarted. If the display and touch are normal, the installation is successful.

Download Resources

• Document

1. 2.4inch RPi Display For RPi 3A+ quick start
2. 2.4inch RPi Display For RPi 3A+ user manual
3. How to install the LCD driver
4. How to calibrate the resistance touch screen
5. How to install matchbox-keyboard
6. How to change display direction GPIO resistive touch
7. How to use Raspberry Pi(Download,Format,Burn,SSH,PuTTy)
8. RaspberryPi Ubuntu-mate open ssh instructions
9. RaspberryPi Ubuntu-mate-18.04 ssh connect

• Images Download

If you have difficulty installing the driver, or if you still can't use the display properly after installing the driver,

Please Try our Configned images for tested.

Just need download and write the image into the TF card. DO NOT need any driver installation steps.

System Name	System Version	Supported Raspberry Pi version	Default user and passwd	Download Link
Raspbian	2023-02-21	PI4/PI3B+/PI3/ PI2/PI1/ZERO/ZERO W	user: pi password: raspberry	BaiduYun:	MPI2411-2.4inch-for3A+-2023-02-21-raspios-buster-armhf.7z 提取码：1fv0
				Mega:	MPI2411-2.4inch-for3A+-2021-03-04-raspios-buster-armhf.7z
Ubuntu-mate	22.04	PI4,PI3B+,PI3,PI2	user: pi password: raspberry	BaiduYun:	MPI2411-2.4inch-for3A+-ubuntu-mate-22.04-desktop-armhf+raspi.7z 提取码：0idx
				Mega:	MPI2411-2.4inch-for3A+-ubuntu-mate-22.04-desktop-armhf+raspi.7z
Kali-linux	2022.1	PI4B,PI3B+,PI3,PI2	user: kali password: kali	BaiduYun:	MPI2411-2.4inch-for3A+-kali-linux-2022.1 提取码：x52b
				Mega:	MPI2411-2.4inch-for3A+-kali-linux-2020.4

• MD5 checksum of the image files
• Common software

1. Panasonic SDFormatter
2. Win32DiskImager
3. PuTTY

BACK TO TOP