Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

3.5inch 16BIT RTP&CTP MODULE ST7796 SKU:MRB3512

From LCD wiki

语言选择

Languages

➤中文
➤EN


Product Picture

Product Description

  • 3.5-inch color screen, support 16BIT RGB 65K color display,display rich colors
  • 320x480 resolution for clear display
  • IPS screen with full view
  • Support switching between resistance touch screen and capacitive touch screen
  • Support 16-bit parallel data bus mode switching
  • Military-grade process standards, long-term stable work
  • Support punctual atom full range of development board inline
  • Provide STM32/C51 source code, WIKI data online update
  • Provide underlying driver technical support

Product Parameters

Name Parameter
Display Color 16BIT RGB 65K color
SKU MRB3512
Screen Size 3.5(inch)
Screen Type IPS TFT
Driver IC ST7796
Resolution 480*320 (Pixel)
Module Interface 16Bit parallel interface
Active Area 48.96x73.44 (mm)
Touch Screen Type Capacitive touch screen (maximum support for 5 touches) and Resistance touch screen
Touch IC Resistance touch screen: XPT2046

Capacitive touch screen: GT911

Module PCB Size 56.41x97.60 (mm)
Operating Temperature -10℃~60℃
Storage Temperature -20℃~70℃
Operating Voltage 3.3V/5V
Power Consumption TBD
Rough Weight 57g

Interface Definition

Picture1. Module Front picture Picture2. Module rear picture


1. The hardware of the module supports switching between resistance touch screen and

capacitive touch screen (as shown in the dotted line box in Picture 2 above), as follows:
Use resistance touch screen: solder the components in the dotted line box of RTOUCH,
and do not need to weld the components in the dotted line box of CTOUCH;
Use capacitive touch screen: solder the components in the dotted line box of CTOUCH,
and do not need to weld the components in the dotted line box of RTOUCH;

2. The hardware of this module only supports 16 bit mode

Number Module Pin Pin Description
1 CS LCD reset control pin( low level enable)
2 RS LCD register / data selection control pin(high level: register, low level: data)
3 WR LCD write control pin
4 RD LCD read control pin
5 RST LCD reset control pin( low level reset)
6 D0 LCD data bus 16-bit pin
7 D1
8 D2
9 D3
10 D4
11 D5
12 D6
13 D7
14 D8
15 D9
16 D10
17 D11
18 D12
19 D13
20 D14
21 D15
22 GND Module power ground pin
23 BL LCD backlight control pin(High level light)
24 VDD Module power positive pin (module has integrated voltage regulator IC, so it can be connected to 5V or 3.3V on STM32 and 5V on C51)
25 VDD
26 GND Module power ground pin
27 GND
28 NC LCD backlight power positive pin (default shared onboard backlight power supply, this pin can not be connected)
29 MI Resistance touch screen SPI bus read signal
30 MO Resistance touch screen SPI bus write signal or

capacitance touch screen IIC bus data signal

31 PEN Capacitive or resistive touch screen interrupt detection pin (low level when touch occurs)
32 NC Not defined, no need to use
33 TCS Resistance touch screen chip selection control signal or capacitive touch screen reset signal (low level reset)
34 TCK Resistance touch screen SPI bus or

capacitive touch screen IIC bus clock signal

How to use on STM32 development board

This module is compatible with the ALIENTEK STM32 development board. The specific usage is as follows:

  • Step 1: Download the test program
  1. Download the STM32 test program from the Program Download column
  2. For a description of the relevant test procedures, please refer to the test program documentation in the package
  • Step 2: Connect the STM32 development board
  1. Find the TFTLCD Slot on the development board, connect the module pins and Slot(For example, the module CS pin corresponds to the slot CS pin),
and then plug them directly into the Slot
  • Step 3: Compile and download the program to the development board
  1. Compile and download the program you need to test to the STM32 development board( Don't know how to compile and download?
  • Step 4: Observe the running of the program
  1. After the program is finished, observe the running status of the program. If it can be displayed normally, the program runs successfully.

Program Download

As follows:

Product Documentation

Reference Materials

Common Software

BACK TO TOP