3.2inch IPS SPI Module ILI9341

Product Picture

3.2 “ color screen with 320x480 resolution of 65K colors and rich display colors
The upgrade adopts IPS full view panel, with good visual angle
On board level conversion circuit, compatible with 5V and 3.3V MCU
Adopting a 4-wire SPI serial bus to save I/O pins
Optional capacitive touch/no touch function for modules
Module input supports 2.54 pin interface and FPC extension interface
Equipped with micro TF card slot for easy storage expansion
Provide rich example learning programs (ESP32/STM32/Arduino UNO&Mage2560/C51/CH32)
Provide low-level driver technical support, and update WIKI information online
Multiple tests for module aging can meet military level standards, supporting long-term stable work

Name	Parameter
LCD Parameters
Screen Size	3.5 inch
Screen Type	IPS
Resolution	320xRGBx480 (pixels)
Active Area (AA area)	48.96(W)x73.44(H)(mm)
Number of Colors(Max)	16.7M
Driver IC	ST7796U
Display Interface	4-Line SPI
Pixel Size	0.153(H)x0.153(mm)
View Angle	ALL 0’CLOCK
Brightness(TYP)	300(cd/m²)
Backlight Type	White LED*6
Operation Temperature	-10~50(℃)
Storage Temperature	-20~60(℃)
Touch Screen Parameters
Touch Active Area	3.5 inch
Touch Screen Type	Capacitive Touch Screen
Touch Screen Resolution	320x480(pixels)
Driver IC	FT6336U
Touch Screen Visual Area	49.56(w)x74.04(H)(mm)
Communication Interface	IIC
Material	G+F
Operation Temperature	-20~70(℃)
Storage Temperature	-30~80(℃)
Size Parameters
TFT Outline Size	55.50±0.2(W)x84.96±0.2(H)x2.5±0.1(D)(mm)(Excluding cables and adhesive backing)
Touch Screen Outline Size	55.50±0.2(W)x84.96±0.2(H)x0.8 (D)(mm)(Excluding cables and adhesive backing)
Module Outline Size	Have Touch Screen:55.5(W)x98.0(H)x12.98(D)(mm)(including Pin Header) NO Touch Screen:55.5(W)x98.0(H)x14.28(D)(mm)(including Pin Header)
Electrical Parameters
Working Voltage	5.0 V
Backlight Current	95 mA
Power	0.5 W
Other Parameters
SKU	NO Touch Screen : MSP3525 Have Touch Screen : MSP3526
Interface	14 Pin 2.54mm Header and 0.5mm FPC
Weight(including package)	MSP3525: 70g MSP3526: 80g

Number	Pin Label	Description
1	VCC	Power positive
2	GND	Power ground
3	LCD_CS	LCD selection control signal, Low level active
4	LCD_RST	LCD reset control signal, Low level reset
5	LCD_RS	LCD command / data selection control signal High level: data, low level: command
6	SDI(MOSI)	SPI bus write data signal(SD card and LCD screen used together)
7	SCK	SPI bus clock signal(SD card and LCD screen used together)
8	LED	LCD backlight control signal (If you need control, please connect the pins. If you don't need control, you can skip it)
9	SDO(MISO)	SPI bus read data signal (SD card and LCD screen used together)
10	CTP_SCL	Capacitive touch screen IIC bus clock signal (modules without touch screens do not need to be connected)
11	CTP_RST	Capacitor touch screen reset control signal, low-level reset (modules without touch screens do not need to be connected)
12	CTP_SDA	Capacitive touch screen IIC bus data signal (modules without touch screens do not need to be connected)
13	CTP_INT	Capacitor touch screen IIC bus touch interrupt signal, when generating touch, input low level to the main control (modules without touch screens do not need to be connected)
14	SD_CS	SD card selection control signal, low level active (without SD card function, can be disconnected)