Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

2.4inch RPi Display For RPi 3A+

From LCD wiki

语言选择

Languages

➤中文
➤EN


Product Pictures

Product Features

  • 2.4inch standard display with physical resolution of 320×240
  • SPI interface with resistive touch screen for touch control
  • perfectly compatible and can be directly inserted into any version of the Raspberry Pi (Raspberry Pi ZeroW, A, A+, B, B+, 2B, 3B, 3B+)
  • Support for Raspbian/Ubuntu/Kali systems, Provide driver, image, and online wiki guidance documents
  • This product has passed CE and RoHS certification

Main Parameters

Name Description
SKU MPI2411
Screen Size 2.4inch
LCD Type TFT
Module Interface SPI
Resolution 320*240 (Pixel)
Active Area 36.72x48.96(mm)
Touch Screen Controller XPT2046
LCD Driver IC ILI9341
Backlight LED
Power Consumption 0.08A*5V
Operating Temperature(℃) -20~60
Module PCB Size 56.00x65.00(mm)
Rough Weight(Package containing)(g) 37 (g)

Hardware Description

  • Interface Definition
Pin Number Identification Description
1, 17 3.3V Power supply (3.3V power input)
2, 4 5V Power supply (5V power input)
3, 5, 7, 8, 10, 12, 16,18,22 NC Not connected
6, 9, 14, 20, 25 GND Power ground
11 TP_IRQ The touch panel is interrupted, and it is detected that the touch panel is pressed low.
15 LCD_RS Instruction/data register selection, low level is instruction, high level is data
19 LCD_SI / TP_SI LCD display / touch panel SPI data input
21 TP_SO Touch panel SPI data output
13 RST Reset signal, low reset
23 LCD_SCK / TP_SCK LCD display / touch panel SPI clock signal
24 LCD_CS LCD chip select signal, low level enable
26 TP_CS Touch panel chip select signal, low level enable
  • Product Size

How to use with Raspberry Pi OS

  • Step 1, Install official image Raspberry Pi OS

1) Download the latest image from the official download

    https://www.raspberrypi.com/software/operating-systems/

2) Install the system according to the official tutorial steps.

  • Step 2, Install the driver for the LCD

1) Connect the 2.4inch RPi Display For RPi 3A+ with the Raspberry Pi and plug it in

2) Log into the command line interface for Raspberry Pi(Initial user name: pi, Password: raspberry), Get the latest drive from GitHub (the raspberry pie needs to connect to the Internet), Execute the following commands:

sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD24-3A+-show

After execution, the system will be restarted. If the display and touch are normal, the installation is successful.

Download Resources

  • Document
  1. 2.4inch RPi Display For RPi 3A+ quick start
  2. 2.4inch RPi Display For RPi 3A+ user manual
  3. How to install the LCD driver
  4. How to calibrate the resistance touch screen
  5. How to install matchbox-keyboard
  6. How to change display direction GPIO resistive touch
  7. How to use Raspberry Pi(Download,Format,Burn,SSH,PuTTy)
  8. RaspberryPi Ubuntu-mate open ssh instructions
  9. RaspberryPi Ubuntu-mate-18.04 ssh connect
  • Images Download
If you have difficulty installing the driver, or if you still can't use the display properly after installing the driver,
Please Try our Configned images for tested.
Just need download and write the image into the TF card. DO NOT need any driver installation steps.
System Name System Version Supported Raspberry Pi version Default user and passwd Download Link
Raspbian 2024-03-15 PI5/PI4/PI3B+/PI3/

PI2/PI1/ZERO/ZERO W

user: pi

password: raspberry

BaiduYun: MPI2411-2.4inch-for3A+-2024-03-15-raspios-bookworm-armhf(Pi4-Pi5) 提取码:1fv0
Mega: MPI2411-2.4inch-for3A+-2021-03-04-raspios-buster-armhf.7z
Ubuntu-mate 22.04 PI4,PI3B+,PI3,PI2 user: pi

password: raspberry

BaiduYun: MPI2411-2.4inch-for3A+-ubuntu-mate-22.04-desktop-armhf+raspi.7z 提取码:0idx
Mega: MPI2411-2.4inch-for3A+-ubuntu-mate-22.04-desktop-armhf+raspi.7z
Kali-linux 2023.1 PI4B,PI3B+,PI3,PI2 user: kali

password: kali

BaiduYun: MPI2411-2.4inch-for3A+-kali-linux-2023.1 提取码:x52b
Mega: MPI2411-2.4inch-for3A+-kali-linux-2020.4
  1. Panasonic SDFormatter
  2. Win32DiskImager
  3. PuTTY

BACK TO TOP