Difference between revisions of "4inch HDMI Display-C"
(→在树莓派Raspbian/Ubuntu Mate/Kali/Retropie系统中使用) |
(→资源下载) |
||
| Line 200: | Line 200: | ||
# [http://www.lcdwiki.com/res/Show_Direction_and_Touch/如何修改显示方向和触摸-HDMI-电阻触摸-V1.2.pdf 如何修改显示方向和触摸-HDMI-电阻触摸-V1.2] | # [http://www.lcdwiki.com/res/Show_Direction_and_Touch/如何修改显示方向和触摸-HDMI-电阻触摸-V1.2.pdf 如何修改显示方向和触摸-HDMI-电阻触摸-V1.2] | ||
| − | ==<font color="blue"> | + | ==<font color="blue"> Download resources</font>== |
| − | *''' | + | *''' Documents''' |
# [http://www.lcdwiki.com/res/MPI4008/MPI4008-4inch-HDMI-Display-C-用户手册-V1.0.pdf MPI4008-4inch-HDMI-Display-C-用户手册-V1.0.pdf] | # [http://www.lcdwiki.com/res/MPI4008/MPI4008-4inch-HDMI-Display-C-用户手册-V1.0.pdf MPI4008-4inch-HDMI-Display-C-用户手册-V1.0.pdf] | ||
| Line 216: | Line 216: | ||
| − | *''' | + | *'''Driver Download''' |
# [http://www.lcdwiki.com/res/MPI4008/Local-driver/Ubuntu/LCD-show.tar.gz Ubuntu-驱动] | # [http://www.lcdwiki.com/res/MPI4008/Local-driver/Ubuntu/LCD-show.tar.gz Ubuntu-驱动] | ||
| Line 223: | Line 223: | ||
# [http://www.lcdwiki.com/res/MPI4008/Local-driver/RetroPie_2_3/LCD-show.tar.gz RetroPie-Pi2-Pi3-驱动] | # [http://www.lcdwiki.com/res/MPI4008/Local-driver/RetroPie_2_3/LCD-show.tar.gz RetroPie-Pi2-Pi3-驱动] | ||
| − | *''' | + | *'''Image Download''' |
:如果你觉得前面步骤的修改配置、安装驱动都比较困难或者仍然显示异常，请先使用我们预装好驱动的镜像， | :如果你觉得前面步骤的修改配置、安装驱动都比较困难或者仍然显示异常，请先使用我们预装好驱动的镜像， | ||
| Line 293: | Line 293: | ||
*[http://www.lcdwiki.com/zh/MD5 镜像文件MD5校验] | *[http://www.lcdwiki.com/zh/MD5 镜像文件MD5校验] | ||
| − | * ''' | + | * '''Common Software ''' |
# [http://www.lcdwiki.com/res/software/Panasonic_SDFormatter.zip Panasonic SDFormatter] | # [http://www.lcdwiki.com/res/software/Panasonic_SDFormatter.zip Panasonic SDFormatter] | ||
Revision as of 19:44, 28 April 2019
Contents
Product Pictures
Product Description
- 4.0-inch IPS full-angle display, support HDMI input, refresh rate up to 60FPS
- The physical resolution is 800x480
- Raspberry Pi monitor with touch control (need to install touch driver)
- It can be used as standard HDMI output device for computer display(no touch function)
- Compatible with and can be directly inserted into all versions of raspberry PI motherboards (raspberry PI 1 generation B and Zero need additional HDMI cable)
- Support HDMI audio output, backlight brightness adjustable
Product Parameters
| SKU | MPI4008 |
| Screen Size | 4.0inch |
| LCD Type | TFT |
| Module Interface | HDMI |
| Resolution | 800*480 (Pixel) |
| Touch Screen Controller | XPT2046 |
| LCD Driver IC | NT35510 |
| Backlight | LED |
| power consumption | 0.16A*5V |
| Working temperature（℃） | -20~70 |
| Module PCB Size | 98.60*58.05 (mm) |
| Package Size | 143*134*51 (mm) |
| Product Weight(g) | 125 (g) |
Hardware Description
- ① 3.5mm Headphone Jack: Output audio signal
- ② HDMI：Used to connect the main board and LCD display for HDMI transmission
- ③ Micro USB：Get 5V Power from USB, If ⑤-13*2 Pin Socket has been connected, that this USB interface can be No Connect.
- ④ Backlight adjustment button: Short press backlight change 10%, long press a few seconds to close backlight; short press to open backlight
- ⑤ 13*2 Pin Socket：Get +5V Power from raspberry Pi to LCD, at the same time transfer touch signal back to Raspberry Pi.
- 13*2 Pin Socket interface definition:
| Pin | Name | Description |
| 1、17 | 3.3V | Power supply +3.3V |
| 2、4 | 5V | Power supply +5V |
| 3、5、7、8、10、11、12、13、15、16、18、24 | NC | NC |
| 6、9、14、20、25 | GND | GND |
| 19 | TP_SI | SPI data input of touch panel |
| 21 | TP_SO | SPI data output of touch panel |
| 22 | TP_IRQ | The touch panel is interrupted and the low level is detected when the touch panel is pressed down |
| 23 | TP_SCK | Touch the SPI clock signal of the panel |
| 26 | TP_CS | Touch panel select signal, low level select touch panel |
- Dimension drawing
在树莓派Raspbian/Ubuntu Mate/Kali/Retropie系统中使用
方法一
方法二
- 步骤2, 与树莓派连接
- 如图将液晶屏母座靠右对齐树莓派排针插入，插入HDMI转接头，插入MicroSD卡，连接网线，接好电源
- 步骤3, 安装LCD驱动
- A、在Raspbian系统中安装（树莓派需要连接互联网）
- (1)登陆树莓派终端(SSH远程登录用户名和密码见资源下载的镜像下载) (Q:SSH无法连接？)
- (2)执行以下命令获取LCD驱动并安装(复制后在Putty窗口中单击鼠标右键即可粘贴):
sudo rm -rf LCD-show git clone https://github.com/goodtft/LCD-show.git chmod -R 755 LCD-show cd LCD-show/ sudo ./MPI4008-show |
- B、在Ubuntu、Kali、RetroPie系统中安装
- (1)下载本地驱动，下载链接如下：（因为系统差异，Ubuntu、Kali、RetroPie系统暂时只能使用本地驱动）
- 适用于Ubuntu-mate-18.04系统的驱动下载： Ubuntu-18.04-驱动
- 适用于Kali-linux系统的驱动下载：Kali-2019.1-驱动
- 适用于retropie-rpi2_rpi3系统的驱动下载：RetroPie-Pi2-Pi3-驱动
- 适用于retropie-rpi1_zero系统的驱动下载：RetroPie-Pi1-ZERO-驱动
- (2)将本地驱动复制到树莓派系统Micro SD卡的根目录 （推荐步骤1烧录完成后，将驱动直接拷贝到Micro SD卡根目录里）
- (3)登陆树莓派终端,并执行以下命令安装驱动 (SSH远程登录用户名和密码见资源下载的镜像下载)
- (1)下载本地驱动，下载链接如下：（因为系统差异，Ubuntu、Kali、RetroPie系统暂时只能使用本地驱动）
- B、在Ubuntu、Kali、RetroPie系统中安装
cd /boot tar -xvzf LCD-show.tar.gz chmod -R 755 LCD-show cd LCD-show/ sudo ./MPI4008-show |
- 步骤4, 检测驱动是否安装成功
- LCD驱动安装完成后，系统会自动重启，LCD可以正常显示和触摸就说明驱动安装成功了
注意事项：
- A、Ubuntu系统默认SSH没有开启，具体开启方法见RaspberryPi Ubuntu-mate系统开启SSH说明
- B、Ubuntu-18.04系统ssh连接可能会失败，具体解决方法见RaspberryPi Ubuntu-mate-18.04系统ssh连接失败解决方法说明
- C、RetroPie-rpi1_zero系统不能通过SSH登录（没有网口和wifi模块），需要通过串口拷贝驱动，具体设置方法见RaspberryPi Zero打开串口说明
- D、Retropie系统游戏安装及设置说明见RaspberryPi Retropie系统使用说明
如何作为普通显示器使用
- 使用HDMI连接线将电脑HDMI输出信号连接至LCD的HDMI接口;
- 对Micro USB接口供电;
- 如有多个显示器，请先拔掉其他显示器接口，将本LCD作为唯一显示器进行测试。
- 注: 触摸功能只能接树莓派使用。
如何旋转显示和触摸
Download resources
- Documents
- MPI4008-4inch-HDMI-Display-C-用户手册-V1.0.pdf
- 如何安装LCD驱动-V1.2
- 如何校准电阻触摸屏-V1.2
- 如何安装虚拟键盘(CN)
- 如何修改显示方向和触摸-HDMI-电阻触摸-V1.2
- 树莓派入门教程(下载，格式化，烧录，SSH，PuTTy)-V1.0
- RaspberryPi Ubuntu-mate系统开启SSH说明
- RaspberryPi Ubuntu-mate-18.04系统SSH连接失败解决方法说明
- RaspberryPi Zero打开串口说明
- RaspberryPi Retropie系统使用说明
- Driver Download
- Image Download
- 如果你觉得前面步骤的修改配置、安装驱动都比较困难或者仍然显示异常，请先使用我们预装好驱动的镜像，
- 下载后解压并把镜像写入到TF卡中。然后把卡插入树莓派就可以使用了。
| Image Name | Version | Support | Password | Download | |
|---|---|---|---|---|---|
| Raspbian | 20190408 | PI3B+/A/A+/B/B+/PI2/
PI3/ZERO/ZERO W |
user:pi
password:raspberry |
 360Yun:
|
MPI4008-4inch-HDMI-C-Raspbian-20190408.7z |
 Mega:
|
MPI4008-4inch-HDMI-C-Raspbian-20190408.7z | ||||
| Ubuntu | 18.04.02 | PI3B+,PI3B,PI2B | user:pi
password:raspberry |
360Yun:
|
MPI4008-4inch-HDMI-C-Ubuntu-18.04.02.7z |
| Mega:
|
MPI4008-4inch-HDMI-C-Ubuntu-18.04.2.7z | ||||
| Kali-linux | 2019.1 | PI3B+,PI3,PI2 | user:root
password:toor |
360Yun:
|
MPI4008-4inch-HDMI-C-Kali-2019.1.7z |
| Mega:
|
MPI4008-4inch-HDMI-C-Kali-2019.1.7z | ||||
| RetroPie | 4.4 | Pi1,Pi-ZERO | user:pi
password:raspberry |
360Yun:
|
MPI4008-4inch-HDMI-C-retropie-4.4-rpi1-zero.7z |
| Mega:
|
MPI4008-4inch-HDMI-C-retropie-4.4-rpi1-zero.7z | ||||
| RetroPie | 4.4 | Pi3B+,Pi3,Pi2 | user:pi
password:raspberry |
360Yun:
|
MPI4008-4inch-HDMI-C-retropie-4.4-rpi2-rpi3.7z |
| Mega:
|
MPI4008-4inch-HDMI-C-retropie-4.4-rpi2-rpi3.7z | ||||
- 镜像文件MD5校验
- Common Software
