更多操作
无编辑摘要 |
无编辑摘要 |
||
第65行: | 第65行: | ||
将Micro SD卡插入树莓派,将HDMI线连接树莓派和LCD,将USB线连接树莓派的4个USB口任意一个,USB线另一端连接到LCD的USB口,然后给树莓派上电,如显示和触摸均正常则驱动成功(请使用足2A电源供电)。 | 将Micro SD卡插入树莓派,将HDMI线连接树莓派和LCD,将USB线连接树莓派的4个USB口任意一个,USB线另一端连接到LCD的USB口,然后给树莓派上电,如显示和触摸均正常则驱动成功(请使用足2A电源供电)。 | ||
== <font color="blue">How to use as PC monitor</font> == | |||
* connect the computer HDMI output signal to the LCD HDMI interface by using the HDMI cable | |||
* Connect the LCD's USB Touch interface (Either of the two MicroUSB) to the USB port of the device | |||
* If there are several monitors, please unplug other monitor connectors first, and use LCD as the only monitor for testing. | |||
== <font color="blue">How to rotate display direction and touch</font> == | |||
[ | * '''[[How to modify the display orientation-CTP(En)]]''' | ||
[http://www.lcdwiki.com/res/MPI7002/7inch_HDMI_Display-C_User_Manual(En).pdf 英文版用户手册] | ==<font color="blue"> Document/Video</font>== | ||
*[http://www.lcdwiki.com/res/MPI7002/7inch_HDMI_Display-C_用户手册(CN).pdf 中文用户手册] | |||
*[http://www.lcdwiki.com/res/MPI7002/7inch_HDMI_Display-C_User_Manual(En).pdf 英文版用户手册] | |||
*[http://www.lcdwiki.com/res/MPI5001/EN/How_to_install_the_LCD_driver_V1.2.pdf How_to_install_the_LCD_driver_V1.2] | |||
*[http://www.lcdwiki.com/res/MPI5001/EN/How_to_modify_the_display_orientation-CTP(En).pdf How_to_modify_the_display_orientation-CTP] | |||
*[http://www.lcdwiki.com/res/MPI5001/EN/How_to_install_matchbox-keyboard(En).pdf How_to_install_matchbox-keyboard] | |||
== <font color="blue">Driver download</font> == | |||
*Local download: [http://www.lcdwiki.com/res/RaspDriver/LCD-show.tar.gz LCD-show.tar.gz] | |||
== <font color="blue">Images download</font> == | |||
If you feel that the previous step's modification configuration, installation driver is more difficult or still display exception. | |||
Please use our pre-loaded image to download and write the image to the TF card. Then insert the card into the raspberry pie. | |||
*BaiduPan Download:[https://pan.baidu.com/s/1VjtNRuzpiSRWGFsvRQjuOg Images Download] | |||
*Google Download:wait for Upload | |||
== <font color="blue">Software</font> == | |||
*[http://www.lcdwiki.com/res/software/Panasonic_SDFormatter.zip Panasonic SDFormatter] | |||
*[http://www.lcdwiki.com/res/software/Win32DiskImager.zip Win32DiskImager] | |||
*[http://www.lcdwiki.com/res/software/putty.zip PuTTY] | |||
|-| | |-| |
2018年5月29日 (二) 14:37的版本
<tabber>
产品说明=
产品图片
产品介绍
- 7inch标准显示器,硬件分辨率为1024×600,可通过软件配置分辨率(最高可支持1920×1080)
- 电容触摸屏,最大支持5点触摸
- 支持背光单独控制,可关闭背光节省功耗
- 支持Raspberry Pi、BB Black、Banana Pi等主流mini PC
- 可作为通用HDMI显示器使用,如接电脑HDMI作为副显示器
- 用作树莓派显示器,支持Raspbian,Ubuntu,Kodi,win10 IOT,单点触摸,免驱
- 用作电脑显示器,支持win7,win8,win10系统5点触摸(XP及更老版本系统单点触摸),免驱
- 本产品通过CE、RoHS认证
产品参数
- 尺寸: 7.0(inch)
- SKU: MPI7002
- 分辨率: 1024×600(dots)
- 触摸: 五点电容触摸
- 外形尺寸: 164.9*124.27(mm)
- 产品重量: 380(g)
硬件说明
- ① 背光电源开关:控制背光打开和关闭,可节省功耗。
- ② & ③ USB 触摸/供电接口:用于供电和触摸输出,两者功能一致,只接任意一个即可。
- ④ HDMI 接口:用于连接主板和 LCD 显示屏进行HDMI传输。
在树莓派Raspbian/Ubuntu Mate/Win10 IoT Core系统中使用
- 步骤1, 安装官方镜像
- 从官方下载最新镜像
- 按官方教程步骤安装好系统
- 步骤2, 修改config.txt配置文件
步骤1烧写完成后, 打开Micro SD卡根目录的config.txt文件并在文件末端加入以下代码, 保存并安全弹出Micro SD卡:
max_usb_current=1 hdmi_force_hotplug=1 config_hdmi_boost=7 hdmi_group=2 hdmi_mode=1 hdmi_mode=87 hdmi_drive=1 display_rotate=0 hdmi_cvt 1024 600 60 6 0 0 0
- 步骤3,
将Micro SD卡插入树莓派,将HDMI线连接树莓派和LCD,将USB线连接树莓派的4个USB口任意一个,USB线另一端连接到LCD的USB口,然后给树莓派上电,如显示和触摸均正常则驱动成功(请使用足2A电源供电)。
How to use as PC monitor
- connect the computer HDMI output signal to the LCD HDMI interface by using the HDMI cable
- Connect the LCD's USB Touch interface (Either of the two MicroUSB) to the USB port of the device
- If there are several monitors, please unplug other monitor connectors first, and use LCD as the only monitor for testing.
How to rotate display direction and touch
Document/Video
- 中文用户手册
- 英文版用户手册
- How_to_install_the_LCD_driver_V1.2
- How_to_modify_the_display_orientation-CTP
- How_to_install_matchbox-keyboard
Driver download
- Local download: LCD-show.tar.gz
Images download
If you feel that the previous step's modification configuration, installation driver is more difficult or still display exception.
Please use our pre-loaded image to download and write the image to the TF card. Then insert the card into the raspberry pie.
- BaiduPan Download:Images Download
- Google Download:wait for Upload
Software
|-|
常见问答=
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|-| 售后=
联系我们:
Email: | Lcdwiki@163.com |
---|
致客户:
根据你所在位置和我们之间的时差,你可能会耽误几个小时来处理你的问题。
真诚的希望你的理解!
工作时间:
08:00-18:00(周一到周六) </tabber>